From: janl@langfeldt.net (Nicolai Langfeldt)
To: lm-sensors@vger.kernel.org
Subject: lmsensors on Abit IC7-G
Date: Thu, 19 May 2005 06:24:25 +0000 [thread overview]
Message-ID: <3FBB0C89.7080502@langfeldt.net> (raw)
In-Reply-To: <3FB92482.2070306@langfeldt.net>
Jean Delvare wrote:
>>MODULE_0=i2c-i801
>>MODULE_1=lm80
>>MODULE_2îprom
>># sensors
>>lm80-i2c-0-2e
>>Adapter: SMBus I801 adapter at 0500
>>Algorithm: Non-I2C SMBus adapter
>>+5V: +6.71 V (min = +6.71 V, max = +6.71 V)
>>VTT: +2.55 V (min = +2.55 V, max = +2.55 V)
>>+3.3V: +4.43 V (min = +4.43 V, max = +4.43 V)
>>+Vcore: +3.76 V (min = +3.76 V, max = +3.76 V) ALARM
>>+12V: +16.10 V (min = +16.10 V, max = +16.10 V)
>>-12V: -16.11 V (min = -16.11 V, max = -16.11 V)
>>-5V: -6.70 V (min = -6.70 V, max = -6.70 V)
>>fan1: 0 RPM (min = 0 RPM, div = 1)
>>fan2: 0 RPM (min = 0 RPM, div = 1)
>>temp: -1.00 ?C (hot:limit = -1?C, hysteresis = -1?C)
>> (os: limit = -1?C, hysteresis = -1?C)
>>alarms: Board temperature input (LM75) ALARM
>
>
> Wild guess: this isn't a LM80. No value here make sense. What you have
> here is obviously another model of sensoring chipset.
>
> Which version of lm_sensors are you using? Please try a recent version
> of sensors-detect (preferably from CVS), it should be able to identify
> the chip correctly.
It is 2.8.1 and the corresponding patch to 2.4.22.
> If not, please send the output of "i2cdump 0 0x2e", we'll take a look
> and try to identify the chip.
# i2cdump 0 0x2e
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and
worse!
I will probe file /dev/i2c-0, address 0x2e, mode byte
You have five seconds to reconsider and press CTRL-C!
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 11 08 02 00 00 03 08 ff ff ff ff ff ff ff ff ff ???..??.........
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
That's very negative isn't it :-)
Nicolai
next prev parent reply other threads:[~2005-05-19 6:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-19 6:24 lmsensors on Abit IC7-G Nicolai Langfeldt
2005-05-19 6:24 ` Nicolai Langfeldt [this message]
2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` Nicolai Langfeldt
2005-05-19 6:24 ` Nicolai Langfeldt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FBB0C89.7080502@langfeldt.net \
--to=janl@langfeldt.net \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.