From mboxrd@z Thu Jan 1 00:00:00 1970 From: JoDaY Subject: Tascam US-122: tascam_firmware-0.1 and alsa-firmware Date: Thu, 27 Nov 2003 15:35:22 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3FC60BAA.4060809@laposte.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi, I've succesfully installed tascam_firmware-0.1 from http://usb-midi-fw.sf.net : The Tascam US-122 is "LED lighted", the firmwares are loaded.(by hotplug) I've just compiled cvs version of alsa (2003/11/27) All seems ok: lsmod command show this modules: snd-usb-usx2y snd-usb-audio snd-rawmidi snd-seq-device snd-pcm snd-timer snd-hwdep snd-page-alloc snd usbcore May I ask you if the alsa-firmware and tascam_firmware-0.1 meet them in conflict ? I can see a link USX2Y in /proc/asound wich point to card0. But I can't see it in any mixer: alsamixer return No mixer elems found. Thanks for your great work! Hope this is the right mailing list. JoDaY. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/