From mboxrd@z Thu Jan  1 00:00:00 1970
From: mds@paradyne.com (Mark Studebaker)
Date: Thu, 19 May 2005 06:24:27 +0000
Subject: lm_sensors on Asus PC-DL (Intel 82801EB ICH5)
Message-Id: <3FC8CCB3.89C8CE5B@paradyne.com>
List-Id: <lm-sensors.vger.kernel.org>
References: <200311282159.42048.bfoddy@visi.com>
In-Reply-To: <200311282159.42048.bfoddy@visi.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lm-sensors@vger.kernel.org

don't know where the w83627hf module is but that's what you need.
It's in our package. Find it and get it loaded.
i2c-i801 is working fine.
Don't load lm75 or smbus-arp.


Brian Foddy wrote:
> 
> I'm trying to use lm_sensors to monitor a new
> machine using the Asus PC-DL motherboard,
> (3Ghz Xeon, Canterwood chip set).  Using Mandrake
> 9.2 with the standard 2.8.0 included, sensors-detect
> 
> Probing for PCI bus adapters...
> Use driver `i2c-i801' for device 00:1f.3: Intel 82801EB ICH5
> Probe succesfully concluded.
> 
>  We will now try to load each adapter module in turn.
> Load `i2c-i801' (say NO if built into your kernel)? (YES/no):
> Module loaded succesfully.
> 
> After sensors-detect it finds:
> #----cut here----
> # I2C module options
> alias char-major-89 i2c-dev
> #----cut here----
> 
> To load everything that is needed, add this to some /etc/rc* file:
> 
> #----cut here----
> # I2C adapter drivers
> modprobe i2c-i801
> modprobe i2c-isa
> # I2C chip drivers
> modprobe lm75
> modprobe eeprom
> modprobe smbus-arp
> modprobe w83627hf
> # sleep 2 # optional
> /usr/local/bin/sensors -s # recommended
> #----cut here----
> 
> 2 modules can't be loaded (I can't find them anywhere)
> modprobe: Can't locate module smbus-arp
> modprobe: Can't locate module w83627hf
> 
> And afterwards, the sensors command only outputs:
> sensors
> lm75-i2c-0-48
> Adapter: SMBus I801 adapter at 0500
> Algorithm: Non-I2C SMBus adapter
> temp:     +253.0?C  (limit = +120.0?C, hysteresis = +100.0?C)
> 
> lm75-i2c-0-49
> Adapter: SMBus I801 adapter at 0500
> Algorithm: Non-I2C SMBus adapter
> temp:     +253.0?C  (limit = +120.0?C, hysteresis = +100.0?C)
> 
> eeprom-i2c-0-50
> Adapter: SMBus I801 adapter at 0500
> Algorithm: Non-I2C SMBus adapter
> Memory type:            DDR SDRAM DIMM SPD
> Memory size (MB):       512
> 
> eeprom-i2c-0-52
> Adapter: SMBus I801 adapter at 0500
> Algorithm: Non-I2C SMBus adapter
> Memory type:            DDR SDRAM DIMM SPD
> Memory size (MB):       512
> 
> No cpu temps, fan speeds, voltages, etc.
> I see from your web site the 82801EB has a
> first release of 2.8.0.
> Questions:
> 1.  Should this board work?
> 2.  Are the 2 failed modules the problem/significant?
> 3.  If I upgrade to 2.8.1 would that help?
> 
> Also of note, I use many of the bttv / btaudio / ivtv
> modules on this machine, and want to be sure upgrading
> I2C wouldn't break any of these modules (or at least
> I want to know what I'm getting in to).
> 
> Hope you can help...  I'd like to see these temps.
> Brian