From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Charbonnel Subject: Re: Intel8x0 problems with rc1 Date: Wed, 03 Dec 2003 15:47:23 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3FCDF77B.7070702@undata.org> References: <3FCB855F.7080505@undata.org> <3FCC7EC4.6050200@undata.org> <3FCC9A49.3070300@undata.org> <3FCD163E.7040702@undata.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Takashi Iwai wrote : >>Takashi, I applied your patch but nothings shows up in my logs. >>I even replaced all the KERN_DEBUG by KERN_EMERG, and still nothing. >>The only thing I get is this : >>ALSA intel8x0.c:568: codec_semaphore: semaphore is not ready [0x1][0x300100] >>ALSA intel8x0.c:599: codec_read 0: semaphore is not ready for register 0x56 > > > and the driver still works somehow? > > >>Is it possible that your code never gets called ? > > > if the driver works, it must not happen. > > > Takashi Ok, my fault, sorry Takashi, I stupidly reloaded only the snd-intel8x0 module and forgot snd-ac97-codec, here's the log : ac97_pcm_open: rate = 48000, cfg = 2, slots = 0x198 setting ac97 reg 0x2c to rate 48000 setting ac97 reg 0x2e to rate 48000 ALSA ../../alsa-kernel/pci/ac97/ac97_pcm.c:561: error in snd_ac97_set_rate: cidx=0, reg=0x2e, rate=48000 , err=-22<0>ac97_pcm_open: rate = 48000, cfg = 2, slots = 0x198 (The file's rate was 44100 kHz) Thomas ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/