From mboxrd@z Thu Jan 1 00:00:00 1970 From: Aron Rubin Subject: SII 3512 SATA Progress but help still needed Date: Thu, 04 Dec 2003 15:37:27 -0500 Sender: linux-ide-owner@vger.kernel.org Message-ID: <3FCF9B07.5020509@atl.lmco.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------020908030505000100020905" Return-path: Received: from [192.35.37.50] ([192.35.37.50]:7667 "EHLO enterprise.atl.lmco.com") by vger.kernel.org with ESMTP id S263522AbTLDUha (ORCPT ); Thu, 4 Dec 2003 15:37:30 -0500 List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org, "Justin M. Forbes" <64bit_fedora@comcast.net>, Andre Hedrick This is a multi-part message in MIME format. --------------020908030505000100020905 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit I have made much progress with the latest patches, I am able to boot now. Please help me with the rest. The system is still constantly timing out. See attachments below. Aron Rubin wrote: > SATA controller SII 3512 not recognized by driver. It looks like SII > 3512 is almost identical to 3112 interface. I copy/paste/alterred all > code in ide/pci/siimage.[ch] with "3112" in it to "3512". It seems > about 95% functional. Need help with remaining 5%, related to very, > very, slow controller comms during init with occational "Interrupt > Lost" messages. Seems like comms are out of sync and then resync over > and over. Other than that all drive info comes over. --------------020908030505000100020905 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" 422 (Red Hat Linux 3.2.3-6)) #2 Wed Dec 3 21:56:06 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. ACPI: have wakeup address 0xc0001000 found SMP MP-table at 000f5000 hm, page 000f5000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 229376 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 0 pages. ACPI: RSDP (v000 Nvidia ) @ 0x000f6ab0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7b80 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Unknown CPU [15:4] APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 1 xAPIC support is not present Enabling APIC mode: Flat. Using 1 I/O APICs Kernel command line: ro root=LABEL=/ hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1994.874 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3984.58 BogoMIPS Memory: 903796k/917504k available (1520k kernel code, 13320k reserved, 1128k data, 148k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: Common caps: 078bfbff e1d3fbff 00000000 00000000 CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-18, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 18. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 0FF 0F 0 0 0 0 0 1 1 31 01 0FF 0F 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 0FF 0F 0 0 0 0 0 1 1 41 04 0FF 0F 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 0FF 0F 0 0 0 0 0 1 1 51 07 0FF 0F 0 0 0 0 0 1 1 59 08 0FF 0F 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 0FF 0F 0 0 0 0 0 1 1 69 0b 0FF 0F 0 0 0 0 0 1 1 71 0c 0FF 0F 0 0 0 0 0 1 1 79 0d 0FF 0F 0 0 0 0 0 1 1 81 0e 0FF 0F 0 0 0 0 0 1 1 89 0f 0FF 0F 0 0 0 0 0 1 1 91 10 0FF 0F 1 1 0 1 0 1 1 99 11 0FF 0F 1 1 0 1 0 1 1 A1 12 000 00 1 0 0 0 0 0 0 00 13 0FF 0F 1 1 0 1 0 1 1 A9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1994.8842 MHz. ..... host bus clock speed is 199.4883 MHz. cpu: 0, clocks: 1994883, slice: 997441 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20031002 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfac80, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [10de/00d1] at 00:00.0 PCI->APIC IRQ transform: (B1,I9,P0) -> 17 PCI->APIC IRQ transform: (B1,I11,P0) -> 19 PCI->APIC IRQ transform: (B1,I12,P0) -> 16 PCI->APIC IRQ transform: (B1,I13,P0) -> 17 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3: IDE controller at PCI slot 00:08.0 NFORCE3: chipset revision 165 NFORCE3: not 100% native mode: will probe irqs later AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround. AMD_IDE: PCI device 10de:00d5 (nVidia Corporation) (rev a5) UDMA133 controller on pci00:08.0 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA SiI3512 Serial ATA: IDE controller at PCI slot 01:0d.0 SiI3512 Serial ATA: chipset revision 1 SiI3512 Serial ATA: not 100% native mode: will probe irqs later ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio hda: WDC AC28400R, ATA DISK drive blk: queue c0420380, I/O limit 4095Mb (mask 0xffffffff) hdc: HL-DT-ST RW/DVD GCC-4520B, ATAPI CD/DVD-ROM drive hde: ST380013AS, ATA DISK drive blk: queue c0420c38, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xf880d080-0xf880d087,0xf880d08a on irq 17 hda: attached ide-disk driver. hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: host protected area => 1 hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63 hde: attached ide-disk driver. hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: host protected area => 1 hde: lost interrupt hde: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63 hde: lost interrupt hde: lost interrupt Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hde:<4>hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 95k freed VFS: Mounted root (ext2 filesystem). hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 148k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:02.0 to 64 usb-ohci.c: USB OHCI at membase 0xf882d000, IRQ 3 usb-ohci.c: usb-00:02.0, PCI device 10de:00d7 (nVidia Corporation) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected PCI: Setting latency timer of device 00:02.1 to 64 usb-ohci.c: USB OHCI at membase 0xf882f000, IRQ 3 usb-ohci.c: usb-00:02.1, PCI device 10de:00d7 (nVidia Corporation) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected PCI: Setting latency timer of device 00:02.2 to 64 ehci_hcd 00:02.2: PCI device 10de:00d8 (nVidia Corporation) ehci_hcd 00:02.2: irq 3, pci mem f8838000 usb.c: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 00:02.2 ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice hub.c: new USB device 00:02.1-3, assigned address 2 : USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0 hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal Adding Swap: 265032k swap-space (priority -1) hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt hde: dma_timer_expiry: dma status == 0x24 hde: DMA interrupt recovery hde: lost interrupt kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 1010 $ Ben Collins ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[e3006000-e30067ff] Max Packet=[2048] SCSI subsystem driver Revision: 1.00 hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: RW/DVD GCC-4520B Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 --------------020908030505000100020905 Content-Type: text/plain; name="hde_settings" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="hde_settings" name value min max mode ---- ----- --- --- ---- acoustic 0 0 254 rw address 1 0 2 rw bios_cyl 9729 0 65535 rw bios_head 255 0 255 rw bios_sect 63 0 63 rw breada_readahead 8 0 255 rw bswap 0 0 1 r current_speed 70 0 70 rw failures 0 0 65535 rw file_readahead 124 0 16384 rw init_speed 70 0 70 rw io_32bit 0 0 3 rw keepsettings 0 0 1 rw lun 0 0 7 rw max_failures 1 0 65535 rw max_kb_per_request 15 1 255 rw multcount 16 0 16 rw nice1 1 0 1 rw nowerr 0 0 1 rw number 0 0 3 rw pio_mode write-only 0 255 w slow 0 0 1 rw unmaskirq 0 0 1 rw using_dma 1 0 1 rw wcache 0 0 1 rw --------------020908030505000100020905 Content-Type: text/plain; name="ide_siimage" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="ide_siimage" Controller: 0 SiI3512 Chipset. MMIO Base 0xe3005000 MMIO-DMA Base 0xe3005000 MMIO-DMA Base 0xe3005008 --------------020908030505000100020905--