[parisc-linux] 2.6 & pdc_console pb on c110: "Warning: unable to open an initial console."

[Joel Soete <soete.joel@tiscali.be>]

Hi all,

I try to see if pdc_console could be operational on my c110 with kernel 2.6.0-pa5.

So I uncheck serial_mux and check pdc_console with make menuconfig (edit also pdc_cons.c to define EARLY_BOOTUP_DEBUG)
Then I create the special file "mknod /dev/ttyB0 c 11 0", add "TB0:12345:respawn:/sbin/getty 38400 ttyB0" in /etc/inittab

(I also try to apply Richard patch <http://lists.parisc-linux.org/pipermail/parisc-linux/2002-May/016384.html>)

But no way to make it works?

Linux version 2.6.0-pa5 (root@hpalin) (gcc version 3.3.3 20031206 (prerelease) 3FP[0] enabled: Rev 1 Model 11 
                               The 32-bit Kernel has started...
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 000058e0 00000481 00000000 00000002 77e47570 100000f1 00000004 0000008a 0avers  0000000d
CPUID vers 11 rev 13 (0x0000016d)
model 9000/777/C110
Total Memory: 128 Mb
[snip]
Soft power switch enabled, polling @ 0xf0140000.
Console: switching to colour frame buffer device 128x48
pty: 256 Unix98 ptys configured
lp: driver loaded but no devices found
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled
ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A
ttyS1 at MMIO 0xffe02800 (irq = 121) is a 16550A
[snip]
Freeing unused kernel memory: 504k freed
Warning: unable to open an initial console.
Adding 131832k swap on /dev/md1.  Priority:-1 extents:1
EXT3 FS on md2, internal journal
[snip]
....eth0: link ok.

Debian GNU/Linux testing/unstable hpalin ttyS0

hpalin login:

In th syslog I also notice:
[snip]
Dec 27 21:45:03 hpalin init: Id "TB0" respawning too fast: disabled for 5 minutes
Dec 27 21:52:15 hpalin init: Id "TB0" respawning too fast: disabled for 5 minutes
[snip]

And don't find any such device with:
# cat /proc/devices
Character devices:
   1 mem
   2 pty
   3 ttyp
   4 /dev/vc/0
   4 tty
   4 ttyS
   5 /dev/tty
   5 /dev/console
   5 /dev/ptmx
   6 lp
   7 vcs
   9 st
  10 misc
  13 input
  14 sound
  21 sg
  29 fb
  36 netlink
128 ptm
136 pts
180 usb
[snip]

Any idea? (what should I do wrongly?)

Thanks in advance for attention,
	Joel