From: David Ford <david+hb@blue-labs.org>
To: linux-kernel mailing list <linux-kernel@vger.kernel.org>
Subject: APCUPSD and HID spam
Date: Tue, 30 Dec 2003 23:59:12 -0500 [thread overview]
Message-ID: <3FF257A0.8070906@blue-labs.org> (raw)
after starting apcupsd, my system is deluged with over three thousand of
these messages per second; the control queue full messages. doesn't
stop until apcupsd is stopped. i can't say if this is new or longtime,
i just hooked it up after several months.
# uname -a
Linux Huntington-Beach.Blue-Labs.org 2.6.0 #1 Fri Dec 26 20:07:52 EST
2003 i686 Unknown CPU Type AuthenticAMD GNU/Linux
# lsusb
Bus 003 Device 004: ID 051d:0002 American Power Conversion Back-UPS Pro 500
Bus 003 Device 003: ID 046d:0870 Logitech, Inc. QuickCam Express
Bus 003 Device 002: ID 05a9:0511 OmniVision Technologies, Inc. OV511 WebCam
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 004: ID 0451:1446 Texas Instruments, Inc. TUSB2040/2070 Hub
Bus 002 Device 003: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus]
Bus 002 Device 002: ID 046d:c50d Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
# lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?)
(rev a2)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev a2)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev a2)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev a2)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev a2)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev a2)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
00:05.0 Multimedia audio controller: nVidia Corporation nForce
MultiMedia audio [Via VT82C686B] (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE
1394) Controller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2)
01:08.0 Ethernet controller: Unknown device 168c:0013 (rev 01)
01:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
01:09.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
01:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[FasterNet] (rev 22)
03:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX
5200] (rev a1)
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: NIS server startup
succeeded
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: apcupsd 3.10.5 (04
February 2003) gentoo startup succeeded
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: APC : 001,033,0852
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: DATE : Tue Dec 30
23:42:09 EST 2003
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: HOSTNAME :
Huntington-Beach.Blue-Labs.org
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: RELEASE : 3.10.5
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: VERSION : 3.10.5 (04
February 2003) gentoo
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: UPSNAME : HB-powerpack
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: CABLE : USB Cable
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: MODEL : Back-UPS ES 350
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: UPSMODE : Stand Alone
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: STARTTIME: Tue Dec 30
23:42:09 EST 2003
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: STATUS : ONLINE LOWBATT
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: LINEV : 119.0 Volts
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: LOADPCT : 80.0
Percent Load Capacity
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: BCHARGE : 100.0 Percent
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: TIMELEFT : 1.0 Minutes
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: MBATTCHG : 5 Percent
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: MINTIMEL : 3 Minutes
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: MAXTIME : 0 Seconds
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: LOTRANS : 088.0 Volts
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: HITRANS : 138.0 Volts
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: ALARMDEL : Always
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: BATTV : 13.6 Volts
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: NUMXFERS : 0
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: TONBATT : 0 seconds
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: CUMONBATT: 0 seconds
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: XOFFBATT : N/A
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: STATFLAG : 0x02010048
Status Flag
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: MANDATE : 2003-01-18
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: SERIALNO : AB0303246275
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: BATTDATE : 2000-00-00
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: NOMBATTV : 12.0
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: FIRMWARE : .e2.D USB FW:e2
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: APCMODEL : Back-UPS ES 350
Dec 30 23:42:09 Huntington-Beach apcupsd[31071]: END APC : Tue Dec 30
23:42:09 EST 2003
Dec 30 23:42:09 Huntington-Beach drivers/usb/input/hid-core.c: control
queue full
Dec 30 23:42:09 Huntington-Beach drivers/usb/input/hid-core.c: control
queue full
Dec 30 23:42:09 Huntington-Beach drivers/usb/input/hid-core.c: control
queue full
Dec 30 23:42:09 Huntington-Beach drivers/usb/input/hid-core.c: control
queue full
next reply other threads:[~2003-12-31 4:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-31 4:59 David Ford [this message]
2003-12-31 14:14 ` APCUPSD and HID spam Adam Kropelin
2003-12-31 14:41 ` David Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FF257A0.8070906@blue-labs.org \
--to=david+hb@blue-labs.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.