From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajkumar S Date: Thu, 08 Jan 2004 20:21:20 +0000 Subject: [LARTC] [ot]Bridging and Cisco switch Message-Id: <3FFDB8F0.60209@asianetindia.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I was trying to setup QoS for my network in my machine. It had a Ethernet interface connected to a cisco switch. I connected one more interface on to the same switch and setup and bridge, zeroed out both the interfaces and assigned my old ip to the bridge interface. After this when I pinged outside, all the lights in my switch started blinking fast. I immediately pulled the network cable from my box. Is the configuration I attempted "legal"? Is their any problem with bridges and Switchs? When a packet comes to bridge ip, which interface does it go? I am bit confused! Thanks for your help raj _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/