From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick McHardy Date: Thu, 08 Jan 2004 20:31:39 +0000 Subject: Re: [LARTC] Strange behavior deleting filters Message-Id: <3FFDBE2B.4090700@trash.net> List-Id: References: <3FFD829F.304@pobox.com> In-Reply-To: <3FFD829F.304@pobox.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Andre Correa wrote: > > Hi list, I'm playing with tc and found a strange behavior when I try > to delete filters. For example, this simple scenario: > > tc qdisc add dev eth1 root handle 1: htb default 100 > tc class add dev eth1 parent 1: classid 1:1 htb rate 128Kbit > tc class add dev eth1 parent 1: classid 1:2 htb rate 258Kbit > tc class add dev eth1 parent 1: classid 1:100 htb rate 32Kbit > tc filter add dev eth1 parent 1: protocol ip prio 1 u32 match ip src > 10.10.10.20 match ip dst 63.63.63.63 flowid 1:1 > tc filter add dev eth1 parent 1: protocol ip prio 1 u32 match ip src > 10.10.10.20 flowid 1:2 > > works just fine, but when I try to delete oen of the filters with > something like this: > > tc filter del dev eth1 parent 1: protocol ip prio 1 u32 match ip src > 10.10.10.20 flowid 1:2 > > both filters are deleted. The kernel only regards priorities when deleting a filter without giving a handle. Use the handle if you want to delete a specific filter. Regards, Patricky _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/