Re: [PATCH v8 2/2] ARM: dts: aspeed: ventura2: Add Meta ventura2 BMC

[Andrew Jeffery <andrew@codeconstruct.com.au>]

On Thu, 2026-07-23 at 16:40 +0800, Kyle Hsieh wrote:
> Hi Andrew,
> 
> Thanks for taking the time to review this.
> On Wed, Jul 22, 2026 at 7:46 PM Andrew Jeffery
> <andrew@codeconstruct.com.au> wrote:
> > 
> > On Mon, 2026-06-15 at 10:46 +0800, Kyle Hsieh wrote:
> > > Ventura2 is a Rack Management Controller. It is a modular
> > > device designed to manage liquid cooling systems and monitor hardware
> > > states within an IT rack. The system uses an AST2600 BMC for management.
> > > 
> > > RMCv2 serves several critical roles:
> > > - Detects liquid leakage at both tray and rack levels.
> > > - Communicates with and controls liquid cooling equipment.
> > > - Manages leakage events and executes system recovery protocols.
> > > 
> > > Key hardware features include:
> > > - An extensive I2C and IO expander topology to support comprehensive
> > >   sensor monitoring and backward compatibility with legacy trays.
> > > - MCTP over I2C support for asynchronous device communications.
> > > - A dual-flash design for BMC firmware redundancy.
> > > 
> > > Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
> > > ---
> > >  arch/arm/boot/dts/aspeed/Makefile                  |    1 +
> > >  .../dts/aspeed/aspeed-bmc-facebook-ventura2.dts    | 2903 ++++++++++++++++++++
> > >  2 files changed, 2904 insertions(+)
> > 
> > We now have scripts/dtc/dt-check-style. Running it over the dts with '-
> > -mode relaxed' yields 49 instances of 'mixed-indent-chars' - these must
> > be fixed. Further, can you please look at the output with '--mode
> > strict', address all the warnings that are reasonable, and then discuss
> > what's left?
> I have fixed all 49 instances of the 'mixed-indent-chars' formatting issues.
> I also ran it with '--mode strict' and addressed the formatting
> warnings accordingly.

Thanks.

> > 
> > Otherwise, there are still some concerns reported against the bindings:
> > 
> >    $ make CHECK_DTBS=y aspeed/aspeed-bmc-facebook-ventura2.dtb W=1
> >    ...
> >      DTC [C] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dtb
> >    arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
> >    /home/andrew/src/kernel.org/linux/origin/build.arm.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dtb: fan-controller@20 (maxim,max31790): 'channel@2', 'channel@5' do not match any of the regexes: '^fan@[0-9]+$', '^pinctrl-[0-9]+$'
> >            from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml
> >    /home/andrew/src/kernel.org/linux/origin/build.arm.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dtb: i2c@400 (aspeed,ast2600-i2c-bus): Unevaluated properties are not allowed ('aspeed,hw-timeout-ms' was unexpected)
> >            from schema $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml
> >    /home/andrew/src/kernel.org/linux/origin/build.arm.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dtb: adc@48 (ti,ads1015): '#address-cells' is a required property
> >            from schema $id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml
> >    /home/andrew/src/kernel.org/linux/origin/build.arm.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dtb: adc@48 (ti,ads1015): '#size-cells' is a required property
> >            from schema $id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml
> >    arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dtb: /ahb/apb/bus@1e78a000/i2c@580/power-monitor@69: failed to match any schema with compatible: ['pmbus']
> >    arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dtb: /ahb/apb/bus@1e7a0000/syscon@0: failed to match any schema with compatible: ['aspeed,ast2600-i3c-global', 'syscon']
> > 
> > Can you please tidy these up?
> The board-specific bindings have been fixed:
> - Removed the invalid `channel@X` subnodes from the `maxim,max31790`
> fan controller.
> - Dropped the deprecated `aspeed,hw-timeout-ms` property from the I2C bus.
> - Removed the incomplete `ti,ads1015` ADC and generic `pmbus` power
> monitor nodes to fully comply with upstream schemas.

Thanks.

> 
> However, the warnings for `aspeed,ast2600-lhc` and
> `aspeed,ast2600-i3c-global` still remain.
> Since these nodes are inherited directly from the SoC level
> (`aspeed-g6.dtsi`), it seems their YAML bindings are not yet merged
> upstream.

Yes, it is fine to disregard these for now.

Andrew