RE: [PATCH 5/7] dt-bindings: pinctrl: realtek: add RTD1315E pinctrl binding

["TY_Chang[張子逸]" <tychang@realtek.com>]

Hi Rob,

>On Wed, Jul 26, 2023 at 05:04:07PM +0800, TY Chang wrote:
>> Add device tree bindings for RTD1315E.
>>
>> Signed-off-by: TY Chang <tychang@realtek.com>
>> ---
>>  .../pinctrl/realtek,rtd1315e-pinctrl.yaml     | 165 ++++++++++++++++++
>>  1 file changed, 165 insertions(+)
>>  create mode 100644
>> Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yam
>> l
>>
>> diff --git
>> a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.y
>> aml
>> b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.y
>> aml
>> new file mode 100644
>> index 000000000000..b8fb6335ed65
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinct
>> +++ rl.yaml
>> @@ -0,0 +1,165 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2023
>> +Realtek Semiconductor Corporation %YAML 1.2
>> +---
>> +$id:
>> +http://devicetree.org/schemas/pinctrl/realtek,rtd1315e-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Realtek DHC RTD1315E Pin Controller
>> +
>> +maintainers:
>> +  - TY Chang <tychang@realtek.com>
>> +
>> +description: |
>> +  Binding for Realtek DHC RTD1315E SoC pin control.
>> +
>> +properties:
>> +  compatible:
>> +    const: realtek,rtd13xxe-pinctrl
>
>Don't use wildcards in compatible strings.

I will fix it in the next version.

>
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +patternProperties:
>> +  '^.*$':
>> +    if:
>> +      type: object
>
>For new bindings, define a suffix (e.g. "-pins") for the node name.

I will fix it.

>
>> +    then:
>> +      allOf:
>> +        - $ref: pincfg-node.yaml#
>> +        - $ref: pinmux-node.yaml#
>> +
>> +      properties:
>> +        pins:
>> +          items:
>> +            enum: [ gpio_0, gpio_1, emmc_rst_n, emmc_dd_sb, emmc_clk,
>emmc_cmd,
>> +                    gpio_6, gpio_7, gpio_8, gpio_9, gpio_10, gpio_11,
>gpio_12,
>> +                    gpio_13, gpio_14, gpio_15, gpio_16, gpio_17, gpio_18,
>gpio_19,
>> +                    gpio_20, emmc_data_0, emmc_data_1, emmc_data_2,
>usb_cc2, gpio_25,
>> +                    gpio_26, gpio_27, gpio_28, gpio_29, gpio_30, gpio_31,
>gpio_32,
>> +                    gpio_33, gpio_34, gpio_35, hif_data, hif_en, hif_rdy,
>hif_clk,
>> +                    gpio_dummy_40, gpio_dummy_41, gpio_dummy_42,
>gpio_dummy_43,
>> +                    gpio_dummy_44, gpio_dummy_45, gpio_46, gpio_47,
>gpio_48, gpio_49,
>> +                    gpio_50, usb_cc1, emmc_data_3, emmc_data_4, ir_rx,
>ur0_rx, ur0_tx,
>> +                    gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62,
>gpio_dummy_63,
>> +                    gpio_dummy_64, gpio_dummy_65, gpio_66, gpio_67,
>gpio_68, gpio_69,
>> +                    gpio_70, gpio_71, gpio_72, gpio_dummy_73,
>emmc_data_5, emmc_data_6,
>> +                    emmc_data_7, gpio_dummy_77, gpio_78, gpio_79,
>gpio_80, gpio_81,
>> +                    ur2_loc, gspi_loc, hi_width, sf_en, arm_trace_dbg_en,
>> +                    ejtag_aucpu_loc, ejtag_acpu_loc, ejtag_vcpu_loc,
>ejtag_scpu_loc,
>> +                    dmic_loc, vtc_dmic_loc, vtc_tdm_loc, vtc_i2si_loc,
>tdm_ai_loc,
>> +                    ai_loc, spdif_loc, hif_en_loc, scan_switch, wd_rset,
>boot_sel,
>> +                    reset_n, testmode ]
>> +
>> +        function:
>> +          enum: [ gpio, nf, emmc, ao, gspi_loc0, gspi_loc1, uart0, uart1,
>> +                  uart2_loc0, uart2_loc1, i2c0, i2c1, i2c4, i2c5, pcie1,
>> +                  etn_led, etn_phy, spi, pwm0_loc0, pwm0_loc1,
>pwm1_loc0,
>> +                  pwm1_loc1, pwm2_loc0, pwm2_loc1, pwm3_loc0,
>pwm3_loc1,
>> +                  spdif_optical_loc0, spdif_optical_loc1, usb_cc1, usb_cc2,
>> +                  sd, dmic_loc0, dmic_loc1, ai_loc0, ai_loc1, tdm_ai_loc0,
>> +                  tdm_ai_loc1, hi_loc0, hi_m, vtc_i2so, vtc_i2si_loc0,
>> +                  vtc_i2si_loc1, vtc_dmic_loc0, vtc_dmic_loc1,
>vtc_tdm_loc0,
>> +                  vtc_tdm_loc1, dc_fan, pll_test_loc0, pll_test_loc1,
>> +                  ir_rx, uart2_disable, gspi_disable, hi_width_disable,
>> +                  hi_width_1bit, sf_disable, sf_enable, scpu_ejtag_loc0,
>> +                  scpu_ejtag_loc1, scpu_ejtag_loc2, scpu_ejtag_loc3,
>> +                  acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2,
>> +                  vcpu_ejtag_loc0, vcpu_ejtag_loc1, vcpu_ejtag_loc2,
>> +                  aucpu_ejtag_loc0, aucpu_ejtag_loc1, aucpu_ejtag_loc2,
>> +                  gpu_ejtag, iso_tristate, dbg_out0, dbg_out1,
>standby_dbg,
>> +                  spdif, arm_trace_debug_disable,
>arm_trace_debug_enable,
>> +                  aucpu_ejtag_disable, acpu_ejtag_disable,
>vcpu_ejtag_disable,
>> +                  scpu_ejtag_disable, vtc_dmic_loc_disable,
>vtc_tdm_disable,
>> +                  vtc_i2si_disable, tdm_ai_disable, ai_disable, spdif_disable,
>> +                  hif_disable, hif_enable, test_loop, pmic_pwrup ]
>> +
>> +
>> +        drive-strength:
>> +          enum: [4, 8]
>> +
>> +        bias-pull-down: true
>> +
>> +        bias-pull-up: true
>> +
>> +        bias-disable: true
>> +
>> +        input-schmitt-enable: true
>> +
>> +        input-schmitt-disable: true
>> +
>> +        drive-push-pull: true
>> +
>> +        power-source:
>> +          description: |
>> +            Valid arguments are described as below:
>> +            0: power supply of 1.8V
>> +            1: power supply of 3.3V
>> +          enum: [0, 1]
>> +
>> +        realtek,pdrive:
>> +          description: |
>> +            An integer describing the level to adjust PMOS output driving
>capability.
>> +          $ref: /schemas/types.yaml#/definitions/uint32
>> +          minimum: 0
>> +          maximum: 7
>> +
>> +        realtek,ndrive:
>> +          description: |
>> +            An integer describing the level to adjust NMOS output driving
>capability.
>> +          $ref: /schemas/types.yaml#/definitions/uint32
>> +          minimum: 0
>> +          maximum: 7
>> +
>> +        realtek,dcycle:
>> +          description: |
>> +            An integer describing the level to adjust output duty cycle.
>> +            Valid arguments are described as below:
>> +            0: 0ns
>> +            2: + 0.25ns
>> +            3: + 0.5ns
>> +            4: -0.25ns
>> +            5: -0.5ns
>> +          $ref: /schemas/types.yaml#/definitions/uint32
>> +          enum: [ 0, 2, 3, 4, 5 ]
>> +
>> +      required:
>> +        - pins
>> +
>> +      additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +     pinctrl@4e000 {
>> +         compatible = "realtek,rtd13xxe-pinctrl";
>> +         reg = <0x4e000 0x130>;
>> +
>> +         emmc_pins_hs200 {
>
>Don't use '_' in node names.

I will fix it.

>
>> +             pins = "emmc_clk",
>> +                    "emmc_cmd",
>> +                    "emmc_data_0",
>> +                    "emmc_data_1",
>> +                    "emmc_data_2",
>> +                    "emmc_data_3",
>> +                    "emmc_data_4",
>> +                    "emmc_data_5",
>> +                    "emmc_data_6",
>> +                    "emmc_data_7";
>> +             function = "emmc";
>> +             realtek,pdrive = <0x2>;
>> +             realtek,ndrive = <0x2>;
>> +         };
>> +
>> +         i2c_pins_0 {
>> +             pins = "gpio_12",
>> +                    "gpio_13";
>> +             function = "i2c0";
>> +             drive-strength = <4>;
>> +         };
>> +     };
>> --
>> 2.41.0
>>
>


Thanks,
TY Chang