Custom Domain 0 Kernel Hang/Reboot

Custom Domain 0 Kernel Hang/Reboot

[Stephen Le]

Hello,

I've been attempting to make a custom kernel for domain 0, and all the
kernels I've made have either hanged or rebooted immediately after the
following two messages:

Scrubbing DOM0 RAM: ..done.
Scrubbing Free RAM: ...done.

I'm on an IBM Thinkpad T40 running Debian unstable. I've tried using a
known working kernel configuration and various minimal configurations.
The minimal configuration I'm using is posted here:
http://www.evilcoder.com/xenconfig

If I use the default configuration that comes with the xen-2.0 source
package, the kernel boots perfectly. Is there something I'm enabling
in the kernel configuration that's incompatible with Xen?

Thanks.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Re: Custom Domain 0 Kernel Hang/Reboot

[Robin Green]

On Wed, 09 Mar 2005 06:12:10 -0800, Stephen Le wrote:
> The minimal configuration I'm using is posted here:
> http://www.evilcoder.com/xenconfig

That's an x86 kernel configuration. You need a Xen kernel configuration.
You need to specify ARCH=xen on the command line when you configure (which
you MUST do, I think) and when you build. See my instructions in the
previous thread started by you.
-- 
Robin




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click