All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Ellerman <patch-notifications@ellerman.id.au>
To: Denis Kirjanov <kda@linux-powerpc.org>, linuxppc-dev@lists.ozlabs.org
Cc: Denis Kirjanov <kda@linux-powerpc.org>
Subject: Re: i2c_powermac: shut up lockdep warning
Date: Mon, 14 Nov 2016 23:17:17 +1100 (AEDT)	[thread overview]
Message-ID: <3tHTzf1fxFz9s5w@ozlabs.org> (raw)
In-Reply-To: <1474457698-3855-1-git-send-email-kda@linux-powerpc.org>

On Wed, 2016-21-09 at 11:34:58 UTC, Denis Kirjanov wrote:
> That's unclear why lockdep shows the following warning but adding a
> lockdep class to struct pmac_i2c_bus solves it
> 
> [   20.507795] ======================================================
> [   20.507796] [ INFO: possible circular locking dependency detected ]
> [   20.507800] 4.8.0-rc7-00037-gd2ffb01 #21 Not tainted
> [   20.507801] -------------------------------------------------------
> [   20.507803] swapper/0/1 is trying to acquire lock:
> [   20.507818]  (&bus->mutex){+.+.+.}, at: [<c000000000052830>] .pmac_i2c_open+0x30/0x100
> [   20.507819]
> [   20.507819] but task is already holding lock:
> [   20.507829]  (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
> [   20.507830]
> [   20.507830] which lock already depends on the new lock.
> [   20.507830]
> [   20.507832]
> [   20.507832] the existing dependency chain (in reverse order) is:
> [   20.507837]
> [   20.507837] -> #4 (&policy->rwsem){+.+.+.}:
> [   20.507844]        [<c00000000082385c>] .down_write+0x6c/0x110
> [   20.507849]        [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
> [   20.507855]        [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110
> [   20.507860]        [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250
> [   20.507866]        [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28
> [   20.507872]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
> [   20.507878]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
> [   20.507883]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> [   20.507887]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
> [   20.507894]
> [   20.507894] -> #3 (subsys mutex#2){+.+.+.}:
> [   20.507899]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
> [   20.507903]        [<c0000000004d7f24>] .bus_probe_device+0x44/0xe0
> [   20.507907]        [<c0000000004d5208>] .device_add+0x508/0x730
> [   20.507911]        [<c0000000004dd528>] .register_cpu+0x118/0x190
> [   20.507916]        [<c000000000b14450>] .topology_init+0x148/0x248
> [   20.507921]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
> [   20.507925]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
> [   20.507929]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> [   20.507934]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
> [   20.507939]
> [   20.507939] -> #2 (cpu_add_remove_lock){+.+.+.}:
> [   20.507944]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
> [   20.507950]        [<c000000000087a9c>] .register_cpu_notifier+0x2c/0x70
> [   20.507955]        [<c000000000b267e0>] .spawn_ksoftirqd+0x18/0x4c
> [   20.507959]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
> [   20.507964]        [<c000000000b0f770>] .kernel_init_freeable+0xb0/0x28c
> [   20.507968]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> [   20.507972]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
> [   20.507978]
> [   20.507978] -> #1 (&host->mutex){+.+.+.}:
> [   20.507982]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
> [   20.507987]        [<c0000000000527e8>] .kw_i2c_open+0x18/0x30
> [   20.507991]        [<c000000000052894>] .pmac_i2c_open+0x94/0x100
> [   20.507995]        [<c000000000b220a0>] .smp_core99_probe+0x260/0x410
> [   20.507999]        [<c000000000b185bc>] .smp_prepare_cpus+0x280/0x2ac
> [   20.508003]        [<c000000000b0f748>] .kernel_init_freeable+0x88/0x28c
> [   20.508008]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> [   20.508012]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
> [   20.508018]
> [   20.508018] -> #0 (&bus->mutex){+.+.+.}:
> [   20.508023]        [<c0000000000ed5b4>] .lock_acquire+0x84/0x100
> [   20.508027]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
> [   20.508032]        [<c000000000052830>] .pmac_i2c_open+0x30/0x100
> [   20.508037]        [<c000000000052e14>] .pmac_i2c_do_begin+0x34/0x120
> [   20.508040]        [<c000000000056bc0>] .pmf_call_one+0x50/0xd0
> [   20.508045]        [<c00000000068ff1c>] .g5_pfunc_switch_volt+0x2c/0xc0
> [   20.508050]        [<c00000000068fecc>] .g5_pfunc_switch_freq+0x1cc/0x1f0
> [   20.508054]        [<c00000000068fc2c>] .g5_cpufreq_target+0x2c/0x40
> [   20.508058]        [<c0000000006873ec>] .__cpufreq_driver_target+0x23c/0x840
> [   20.508062]        [<c00000000068c798>] .cpufreq_gov_performance_limits+0x18/0x30
> [   20.508067]        [<c00000000068915c>] .cpufreq_start_governor+0xac/0x100
> [   20.508071]        [<c00000000068a788>] .cpufreq_set_policy+0x208/0x260
> [   20.508076]        [<c00000000068abdc>] .cpufreq_init_policy+0x6c/0xb0
> [   20.508081]        [<c00000000068ae70>] .cpufreq_online+0x250/0x9d0
> [   20.508085]        [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110
> [   20.508090]        [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250
> [   20.508094]        [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28
> [   20.508099]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
> [   20.508103]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
> [   20.508107]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> [   20.508112]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
> [   20.508113]
> [   20.508113] other info that might help us debug this:
> [   20.508113]
> [   20.508121] Chain exists of:
> [   20.508121]   &bus->mutex --> subsys mutex#2 --> &policy->rwsem
> [   20.508121]
> [   20.508123]  Possible unsafe locking scenario:
> [   20.508123]
> [   20.508124]        CPU0                    CPU1
> [   20.508125]        ----                    ----
> [   20.508128]   lock(&policy->rwsem);
> [   20.508132]                                lock(subsys mutex#2);
> [   20.508135]                                lock(&policy->rwsem);
> [   20.508138]   lock(&bus->mutex);
> [   20.508139]
> [   20.508139]  *** DEADLOCK ***
> [   20.508139]
> [   20.508141] 3 locks held by swapper/0/1:
> [   20.508150]  #0:  (cpu_hotplug.lock){++++++}, at: [<c000000000087838>] .get_online_cpus+0x48/0xc0
> [   20.508159]  #1:  (subsys mutex#2){+.+.+.}, at: [<c0000000004d7670>] .subsys_interface_register+0x50/0x110
> [   20.508168]  #2:  (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
> [   20.508169]
> [   20.508169] stack backtrace:
> [   20.508173] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc7-00037-gd2ffb01 #21
> [   20.508175] Call Trace:
> [   20.508180] [c0000000790c2b90] [c00000000082cc70] .dump_stack+0xe0/0x14c (unreliable)
> [   20.508184] [c0000000790c2c20] [c000000000828c88] .print_circular_bug+0x350/0x388
> [   20.508188] [c0000000790c2cd0] [c0000000000ecb0c] .__lock_acquire+0x196c/0x1d30
> [   20.508192] [c0000000790c2e50] [c0000000000ed5b4] .lock_acquire+0x84/0x100
> [   20.508196] [c0000000790c2f20] [c000000000820448] .mutex_lock_nested+0xa8/0x590
> [   20.508201] [c0000000790c3030] [c000000000052830] .pmac_i2c_open+0x30/0x100
> [   20.508206] [c0000000790c30c0] [c000000000052e14] .pmac_i2c_do_begin+0x34/0x120
> [   20.508209] [c0000000790c3150] [c000000000056bc0] .pmf_call_one+0x50/0xd0
> [   20.508213] [c0000000790c31e0] [c00000000068ff1c] .g5_pfunc_switch_volt+0x2c/0xc0
> [   20.508217] [c0000000790c3250] [c00000000068fecc] .g5_pfunc_switch_freq+0x1cc/0x1f0
> [   20.508221] [c0000000790c3320] [c00000000068fc2c] .g5_cpufreq_target+0x2c/0x40
> [   20.508226] [c0000000790c3390] [c0000000006873ec] .__cpufreq_driver_target+0x23c/0x840
> [   20.508230] [c0000000790c3440] [c00000000068c798] .cpufreq_gov_performance_limits+0x18/0x30
> [   20.508235] [c0000000790c34b0] [c00000000068915c] .cpufreq_start_governor+0xac/0x100
> [   20.508239] [c0000000790c3530] [c00000000068a788] .cpufreq_set_policy+0x208/0x260
> [   20.508244] [c0000000790c35d0] [c00000000068abdc] .cpufreq_init_policy+0x6c/0xb0
> [   20.508249] [c0000000790c3940] [c00000000068ae70] .cpufreq_online+0x250/0x9d0
> [   20.508253] [c0000000790c3a30] [c0000000004d76d8] .subsys_interface_register+0xb8/0x110
> [   20.508258] [c0000000790c3ad0] [c000000000689bb0] .cpufreq_register_driver+0x1d0/0x250
> [   20.508262] [c0000000790c3b60] [c000000000b4f8f4] .g5_cpufreq_init+0x9cc/0xa28
> [   20.508267] [c0000000790c3c20] [c00000000000a98c] .do_one_initcall+0x5c/0x1d0
> [   20.508271] [c0000000790c3d00] [c000000000b0f86c] .kernel_init_freeable+0x1ac/0x28c
> [   20.508276] [c0000000790c3db0] [c00000000000b3bc] .kernel_init+0x1c/0x140
> [   20.508280] [c0000000790c3e30] [c0000000000098f4] .ret_from_kernel_thread+0x58/0x64
> 
> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/9e607f72748ddc5620aeeb8d1f32f3

cheers

      parent reply	other threads:[~2016-11-14 12:17 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-21 11:34 [PATCH] i2c_powermac: shut up lockdep warning Denis Kirjanov
2016-09-26 11:00 ` Denis Kirjanov
2016-09-26 21:03   ` Benjamin Herrenschmidt
2016-10-07  9:05 ` Denis Kirjanov
2016-10-10  5:35   ` Michael Ellerman
2016-10-10  7:25     ` Benjamin Herrenschmidt
2016-11-14 12:17 ` Michael Ellerman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3tHTzf1fxFz9s5w@ozlabs.org \
    --to=patch-notifications@ellerman.id.au \
    --cc=kda@linux-powerpc.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.