From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damion de Soto Date: Fri, 16 Jan 2004 01:22:56 +0000 Subject: Re: [LARTC] put shaping on ppp or eth? Message-Id: <40073CF0.5010706@snapgear.com> List-Id: References: <20040115090510.GA17117@keppler.vrg.de> In-Reply-To: <20040115090510.GA17117@keppler.vrg.de> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Artu-ras =8Alajus wrote: > Cord Buhlert wrote: >=20 >> Hi, >> I wanna do some shaping on a DSL line that is plugged to the eth1 nic. >> Should I attach the qdiscs directly to the ppp device or can I use the >> eth1 device instead? What (and why) makes more sense? >=20 > i think you should use ppp device :) > dunno why yes, you should use the ppp device, because you'll only get PPPoE packets on the ethernet device, and you won't be able to shape them. --=20 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/