From mboxrd@z Thu Jan 1 00:00:00 1970 Sender: jacobs@printing.Eng.Sun.COM Message-ID: <40182352.15D98AC9@Sun.COM> Date: Wed, 28 Jan 2004 15:02:10 -0600 From: Norm Jacobs MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: [Printing-architecture] PAPI v0.91 List-Id: Printing architecture under linux List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: printing-spool@freestandards.org, printing-architecture@freestandards.org For those of you that have been chomping at the bit for an updated PAPI specification, Today is your lucky day. I have placed an updated version of the PAPI spec on the PWG ftp site. The document can be found at ftp://ftp.pwg.org/pub/pwg/fsg/spool/papi-v0.91.pdf I tried to incorporate the comments that were in the mail logs and some additional comments that I received internally. I did incorporate the information from the profiles and the capabilities extension documents from about a year ago. The Change log at the end of the document highlights some of the changes that I have incorporated. There are still a few formatting and numbering issues that I hope to work out. Since we have agreed to make an attempt at addressing document support and more administrative functionality, I know that this is not the last pre-1.0 revision. Hopefully, it is very close to the last one before 1.0. Please post any issues, comments, suggestions to the printing-spool@freestandards.org mail list where they can be discussed, resolved, and archived. -Norm