From: Thomas Davis <tadavis@lbl.gov>
To: lkml <linux-kernel@vger.kernel.org>
Subject: Can't boot a 2.6 kernel..
Date: Thu, 29 Jan 2004 11:18:09 -0800 [thread overview]
Message-ID: <40195C71.8080608@lbl.gov> (raw)
[-- Attachment #1: Type: text/plain, Size: 1586 bytes --]
Ok, I'm trying to get a 2.6 kernel to boot on my desktop here at work.
I have tried 3 different kernels - 2.6.1, 2.6.2rc1, and arjanv's 2.6.1 kernel.
After the grub prompt, I get the grub kernel description, and then..
Nothing. Nada. Zip. Zilch.
2.4 kernels boot and works fine; I've attached the dmesg output of one of it's boots.
Any ideas on what to try?
The /proc/cpuinfo shows:
[root@lanshark boot]# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) MP 2200+
stepping : 0
cpu MHz : 1792.044
cache size : 256 KB
physical id : 0
siblings : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 3578.26
processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) Processor
stepping : 0
cpu MHz : 1792.044
cache size : 256 KB
physical id : 0
siblings : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 3578.26
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 16603 bytes --]
Linux version 2.4.22-1.2149.nptlsmp (bhcompile@porky.devel.redhat.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 SMP Wed Jan 7 12:48:31 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff6c00 (ACPI data)
BIOS-e820: 000000003fff6c00 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
found SMP MP-table at 000f74c0
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 262128
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32752 pages.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7460
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3fff451b
ACPI: FADT (v001 TYAN GUINNESS 0x06040000 PTEC 0x000f4240) @ 0x3fff6b2e
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3fff6ba2
ACPI: DSDT (v001 AMD AMDACPI 0x06040000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled)
Processor #1 Pentium(tm) Pro APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: TYAN Product ID: GUINNESS APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
xAPIC support is not present
Enabling APIC mode: Flat. Using 1 I/O APICs
Kernel command line: ro root=LABEL=/ hdd=ide-scsi rhgb
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1792.044 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3578.26 BogoMIPS
Memory: 1031828k/1048512k available (1578k kernel code, 16296k reserved, 1175k data, 164k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD Athlon(tm) MP 2200+ stepping 00
per-CPU timeslice cutoff: 731.42 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3578.26 BogoMIPS
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU1: AMD Athlon(tm) Processor stepping 00
Total of 2 processors activated (7156.53 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11, 2-16, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 71
0d 003 03 0 0 0 0 0 1 1 79
0e 003 03 0 0 0 0 0 1 1 81
0f 003 03 0 0 0 0 0 1 1 89
10 000 00 1 0 0 0 0 0 0 00
11 003 03 1 1 0 1 0 1 1 91
12 003 03 1 1 0 1 0 1 1 99
13 003 03 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1791.9813 MHz.
..... host bus clock speed is 265.4779 MHz.
cpu: 0, clocks: 2654779, slice: 884926
CPU0<T0:2654768,T1:1769840,D:2,S:884926,C:2654779>
cpu: 1, clocks: 2654779, slice: 884926
CPU1<T0:2654768,T1:884912,D:4,S:884926,C:2654779>
Starting migration thread for cpu 0
smp_num_cpus: 2.
Starting migration thread for cpu 1
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
ACPI: Subsystem revision 20031002
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfd7c0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I11,P0) -> 19
PCI->APIC IRQ transform: (B0,I15,P0) -> 18
PCI->APIC IRQ transform: (B0,I16,P0) -> 19
PCI->APIC IRQ transform: (B1,I5,P0) -> 17
Setting AMD recommended values for PCI bus. It isn't fully PCI standards compliant
I/O APIC: AMD Errata #22 may be present. In the event of instability try
: booting with the "noapic" option.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7411: IDE controller at PCI slot 00:07.1
AMD7411: chipset revision 1
AMD7411: not 100% native mode: will probe irqs later
AMD_IDE: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] IDE (rev 01) UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L040AVER07-0, ATA DISK drive
hdb: CDU5211, ATAPI CD/DVD-ROM drive
blk: queue c047f280, I/O limit 4095Mb (mask 0xffffffff)
hdc: IC35L040AVER07-0, ATA DISK drive
hdd: PLEXTOR CD-R PX-W1610A, ATAPI CD/DVD-ROM drive
blk: queue c047f6f4, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63, UDMA(100)
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4
hdc: hdc1 hdc2
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
[events: 000000cd]
[events: 000000cd]
md: autorun ...
md: considering hdc2 ...
md: adding hdc2 ...
md: adding hda4 ...
md: created md0
md: bind<hda4,1>
md: bind<hdc2,2>
md: running: <hdc2><hda4>
md: hdc2's event counter: 000000cd
md: hda4's event counter: 000000cd
kmod: failed to exec /sbin/modprobe -s -k md-personality-2, errno = 2
md: personality 2 is not loaded!
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<hdc2,1>
md: export_rdev(hdc2)
md: unbind<hda4,0>
md: export_rdev(hda4)
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 165k freed
VFS: Mounted root (ext2 filesystem).
md: raid0 personality registered as nr 2
Journalled Block Device driver loaded
md: Autodetecting RAID arrays.
[events: 000000cd]
[events: 000000cd]
md: autorun ...
md: considering hda4 ...
md: adding hda4 ...
md: adding hdc2 ...
md: created md0
md: bind<hdc2,1>
md: bind<hda4,2>
md: running: <hda4><hdc2>
md: hda4's event counter: 000000cd
md: hdc2's event counter: 000000cd
md0: max total readahead window set to 496k
md0: 2 data-disks, max readahead per data-disk: 248k
raid0: looking at hda4
raid0: comparing hda4(30651904) with hda4(30651904)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hdc2
raid0: comparing hdc2(39160192) with hda4(30651904)
raid0: NOT EQUAL
raid0: comparing hdc2(39160192) with hdc2(39160192)
raid0: END
raid0: ==> UNIQUE
raid0: 2 zones
raid0: FINAL 2 zones
raid0: zone 0
raid0: checking hda4 ... contained as device 0
(30651904) is smallest!.
raid0: checking hdc2 ... contained as device 1
raid0: zone->nb_dev: 2, size: 61303808
raid0: current zone offset: 30651904
raid0: zone 1
raid0: checking hda4 ... nope.
raid0: checking hdc2 ... contained as device 0
(39160192) is smallest!.
raid0: zone->nb_dev: 1, size: 8508288
raid0: current zone offset: 39160192
raid0: done.
raid0 : md_size is 69812096 blocks.
raid0 : conf->smallest->size is 8508288 blocks.
raid0 : nb_zone is 9.
raid0 : Allocating 72 bytes for hash.
md: updating md0 RAID superblock on device
md: hda4 [events: 000000ce]<6>(write) hda4's sb offset: 30651904
md: hdc2 [events: 000000ce]<6>(write) hdc2's sb offset: 39160192
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 164k freed
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc00dc000, IRQ 19
usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 1052248k swap-space (priority -1)
Adding Swap: 1048784k swap-space (priority -2)
hub.c: new USB device 00:07.4-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,0), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdb: attached ide-cdrom driver.
hdb: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PLEXTOR Model: CD-R PX-W1610A Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
inserting floppy driver for 2.4.22-1.2149.nptlsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:0f.0: 3Com PCI 3c980C Python-T at 0x1000. Vers LK1.1.18-ac
00:e0:81:03:bb:c9, IRQ 18
product code 0000 rev 00.3 date 00-00-00
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
00:0f.0: scatter/gather enabled. h/w checksums enabled
divert: allocating divert_blk for eth0
See Documentation/networking/vortex.txt
00:10.0: 3Com PCI 3c980C Python-T at 0x1080. Vers LK1.1.18-ac
00:e0:81:03:bb:ca, IRQ 19
product code 0000 rev 00.3 date 00-00-00
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 7809.
Enabling bus-master transmits and whole-frame receives.
00:10.0: scatter/gather enabled. h/w checksums enabled
divert: allocating divert_blk for eth1
divert: freeing divert_blk for eth0
divert: freeing divert_blk for eth1
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 292 bytes per conntrack
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:0f.0: 3Com PCI 3c980C Python-T at 0x1000. Vers LK1.1.18-ac
00:e0:81:03:bb:c9, IRQ 18
product code 0000 rev 00.3 date 00-00-00
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
00:0f.0: scatter/gather enabled. h/w checksums enabled
divert: allocating divert_blk for eth0
See Documentation/networking/vortex.txt
00:10.0: 3Com PCI 3c980C Python-T at 0x1080. Vers LK1.1.18-ac
00:e0:81:03:bb:ca, IRQ 19
product code 0000 rev 00.3 date 00-00-00
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 7809.
Enabling bus-master transmits and whole-frame receives.
00:10.0: scatter/gather enabled. h/w checksums enabled
divert: allocating divert_blk for eth1
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
next reply other threads:[~2004-01-29 19:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-29 19:18 Thomas Davis [this message]
2004-01-29 19:32 ` Can't boot a 2.6 kernel Erik Mouw
2004-01-29 19:33 ` Thomas Davis
2004-01-29 19:36 ` Thomas Davis
[not found] ` <Pine.LNX.4.58.0401291527180.1094@morpheus>
2004-01-29 20:53 ` Thomas Davis
2004-01-29 21:32 ` Gene Heskett
2004-01-29 21:39 ` Thomas Davis
2004-01-31 15:02 ` Adrian Bunk
-- strict thread matches above, loose matches on Subject: below --
2004-01-30 7:34 Tolentino, Matthew E
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40195C71.8080608@lbl.gov \
--to=tadavis@lbl.gov \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.