From: Stephen Clark <stephen.clark@earthlink.net>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: bttv oops
Date: Mon, 02 Feb 2004 10:15:57 -0500 [thread overview]
Message-ID: <401E69AD.4080606@earthlink.net> (raw)
Gentle people,
I am having the following problem. Also if I compile bttv into the
kernel I get a panic in the driver at boot.
Any ideas?
Thanks,
Steve
Linux joker.seclark.com 2.6.2-rc2-mm1 #24 Sun Feb 1 16:20:54 EST 2004
i686 athlon i386 GNU/Linux
Feb 2 08:26:57 joker kernel: bttv: driver version 0.9.12 loaded
Feb 2 08:26:57 joker kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Feb 2 08:26:57 joker kernel: bttv: Bt8xx card found (0).
Feb 2 08:26:57 joker kernel: bttv0: Bt878 (rev 2) at 0000:00:08.0, irq:
10, latency: 32, mmio: 0xd7021000
Feb 2 08:26:57 joker kernel: bttv0: detected: AVerMedia TVPhone98
[card=41], PCI subsystem ID is 1461:0001
Feb 2 08:26:57 joker kernel: bttv0: using: AVerMedia TVPhone 98
[card=41,autodetected]
Feb 2 08:26:57 joker /sbin/hotplug: no runnable
/etc/hotplug/i2c-adapter.agent is installed
Feb 2 08:26:57 joker /sbin/hotplug: no runnable
/etc/hotplug/i2c-dev.agent is installed
Feb 2 08:26:57 joker /sbin/hotplug: no runnable /etc/hotplug/i2c.agent
is installed
Feb 2 08:26:57 joker kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000000
Feb 2 08:26:57 joker kernel: printing eip:
Feb 2 08:26:57 joker kernel: c02c1214
Feb 2 08:26:57 joker kernel: *pde = 00000000
Feb 2 08:26:57 joker kernel: Oops: 0000 [#1]
Feb 2 08:26:57 joker kernel: CPU: 0
Feb 2 08:26:57 joker kernel: EIP: 0060:[<c02c1214>] Not tainted VLI
Feb 2 08:26:57 joker kernel: EFLAGS: 00010202
Feb 2 08:26:57 joker kernel: EIP is at i2c_master_recv+0xa4/0x110
Feb 2 08:26:57 joker kernel: eax: 00000000 ebx: 00000050 ecx:
00000010 edx: 00004d3c
Feb 2 08:26:57 joker kernel: esi: 00000001 edi: f8ccbca4 ebp:
f8ccbed0 esp: e681de4c
Feb 2 08:26:57 joker kernel: ds: 007b es: 007b ss: 0068
Feb 2 08:26:57 joker kernel: Process modprobe (pid: 7165,
threadinfo=e681c000 task=ef128ce0)
Feb 2 08:26:57 joker kernel: Stack: f8ccbf44 00000001 00000010 00000050
00010050 00000010 f8cd2a20 000000a0
Feb 2 08:26:57 joker kernel: 00000000 f8ccbed0 f8cd2a20 f8ccbca0
f8cba4dc f8ccbed0 f8cd2a20 00000010
Feb 2 08:26:57 joker kernel: f8ccbca0 f8ccbca0 00000000 f8cb6105
f8ccbca0 f8cd2a20 000000a0 00000040
Feb 2 08:26:57 joker kernel: Call Trace:
Feb 2 08:26:57 joker kernel: [<f8cba4dc>] bttv_readee+0x4c/0x80 [bttv]
Feb 2 08:26:57 joker kernel: [<f8cb6105>] bttv_init_card2+0x585/0x620
[bttv]
Feb 2 08:26:57 joker kernel: [<f8cb4a46>] bttv_probe+0x456/0x600 [bttv]
Feb 2 08:26:57 joker kernel: [<c01f66a2>]
pci_device_probe_static+0x32/0x50
Feb 2 08:26:57 joker kernel: [<c01f66e7>] __pci_device_probe+0x27/0x40
Feb 2 08:26:57 joker kernel: [<c01f671c>] pci_device_probe+0x1c/0x40
Feb 2 08:26:57 joker kernel: [<c02380ce>] bus_match+0x2e/0x60
Feb 2 08:26:57 joker kernel: [<c02381e7>] driver_attach+0x57/0x80
Feb 2 08:26:57 joker kernel: [<c023842b>] bus_add_driver+0x6b/0x80
Feb 2 08:26:57 joker kernel: [<c02387ed>] driver_register+0x2d/0x40
Feb 2 08:26:57 joker kernel: [<c01e96d9>] kset_add+0x29/0x30
Feb 2 08:26:57 joker kernel: [<c01e96f1>] kset_register+0x11/0x20
Feb 2 08:26:57 joker kernel: [<c01f68cf>] pci_register_driver+0x4f/0x70
Feb 2 08:26:57 joker kernel: [<f8cb4fec>] bttv_init_module+0x8c/0x120
[bttv]
Feb 2 08:26:57 joker kernel: [<c0130ca1>] sys_init_module+0xf1/0x1b0
Feb 2 08:26:57 joker kernel: [<c03a851a>] sysenter_past_esp+0x43/0x69
Feb 2 08:26:57 joker kernel:
Feb 2 08:26:57 joker kernel: Code: 24 04 50 57 ff 52 24 89 c6 83 c4 0c
89 d9 ff 47 1c 0f 8e 1e 15 00 00 8b 5d
08 53 8b 4c 24 30 51 50 8d 45 74 50 8b 85 8c 00 00 00 <8b> 10 52 68 a0
d2 3f c0 e8 9f c0 e5 ff 83 c4 18 83 fe
01 89 f0
next reply other threads:[~2004-02-02 15:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-02 15:15 Stephen Clark [this message]
2004-02-02 15:47 ` bttv oops Gerd Knorr
2004-02-02 19:20 ` Greg KH
2004-02-04 1:01 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=401E69AD.4080606@earthlink.net \
--to=stephen.clark@earthlink.net \
--cc=linux-kernel@vger.kernel.org \
--cc=sclark46@earthlink.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.