From: Thomas Lange <thomas@corelatus.se>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Can't get ide to work
Date: Wed, 04 Feb 2004 19:51:17 +0100 [thread overview]
Message-ID: <40213F25.9010303@corelatus.se> (raw)
In-Reply-To: <603BA0CFF3788E46A0DB0918D9AA95100A097317@sj580004wcom.int.lantronix.com>
tlb 20 is mapped to phy 0xF00000000 ( not used )
tlb 21 is mapped to phy 0xF40000000 ( not used )
tlb 22 is mapped to phy 0xF80000000
TLB 22 was enough to make CF work on my dbau1000 board
( only tested in big endian mode ).
/Thomas
Jerry Walden wrote:
> Thanks for the response.
>
> Okay - I found the TLB mapping for CFG_PCMCIA_MEM_ADDR (0x20000000),
> however the IDE device is at AU1X_SOCK0_IO (0xF00000000). True - the
> PCMCIA is at 0x20000000, however not the ide device. If I look at the
> YAMON source - there is a mapping done for 0xF00000000.
>
> I don't see it in u-boot. Where am I going wrong?
>
> Thanks
>
> -----Original Message-----
> From: Thomas Lange [mailto:thomas at corelatus.se]
> Sent: Tuesday, February 03, 2004 1:29 PM
> To: Jerry Walden
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] Can't get ide to work
>
>
> TLB is created in board/dbau1x00/dbau1x00.c
>
> Could be an endian problem, i.e. you read the wrong byte.
>
> /Thomas
>
> Jerry Walden wrote:
>
>>Our board is based on the Alchemy DBAu1500
>>
>>We are using a compact flash card that as an IDE drive (tied into the
>>IDE interface of the CPU just like the DBAu1500).
>>
>>During ide_init, the ATA_STATUS byte is read, and there is a wait loop
>
>
>>which waits for the status to be ready. This loop always times out.
>>I am trying to debug this. Tracing through ide_inb, and ide_outb, the
>
>
>>address of the interface is fine CFG_PCMCIA_MEM_ADDR (0x20000000). I
>>know that there has to be some TLB mapping between CFG_PCMCIA_MEM_ADDR
>
>
>>(0x20000000) and AU1X_SOCK0_IO
>>(F00000000) - I just cannot find where this is done.
>>
>>Any suggestions?
>>
>>Thanks
>
>
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
next prev parent reply other threads:[~2004-02-04 18:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-04 18:09 [U-Boot-Users] Can't get ide to work Jerry Walden
2004-02-04 18:51 ` Thomas Lange [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-02-05 0:13 Jerry Walden
2004-02-03 19:35 Jerry Walden
2004-02-03 18:15 Jerry Walden
2004-02-03 21:28 ` Thomas Lange
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40213F25.9010303@corelatus.se \
--to=thomas@corelatus.se \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.