From: ck <x@dsl.pipex.com>
To: linux-kernel@vger.kernel.org
Subject: Stack Trace - problem unknown (__crc_ide_bus_type) - system running ok
Date: Wed, 11 Feb 2004 06:43:32 +0000 [thread overview]
Message-ID: <4029CF14.1090609@dsl.pipex.com> (raw)
[1.] Stack Trace - problem unknown - system running ok?
[2.] I think it happened during the modules loading stage
[3.] kernel, pci
[4.] Linux version 2.6.3-rc2 (root@diogenis) (gcc version 3.3.2 20031218
(Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 SMP Tue Feb 10 05:37:34 GMT
2004
[5.]
-------------------------------------
dmesg
-------------------------------------
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00200018fd]
Badness in kobject_get at lib/kobject.c:431
Call Trace:
[<c0241b8d>] kobject_get+0x4d/0x50
[<c028c768>] get_device+0x18/0x30
[<c028d3eb>] bus_for_each_dev+0x6b/0xd0
[<f8eadadd>] nodemgr_node_probe+0x4d/0x130 [ieee1394]
[<f8ead9a0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<f8eadf48>] nodemgr_host_thread+0x188/0x1b0 [ieee1394]
[<f8eaddc0>] nodemgr_host_thread+0x0/0x1b0 [ieee1394]
[<c0106ea9>] kernel_thread_helper+0x5/0xc
Unable to handle kernel paging request at virtual address b828ec83
printing eip:
b828ec83
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<b828ec83>] Not tainted
EFLAGS: 00010282
EIP is at 0xb828ec83
eax: b828ec83 ebx: f8eba388 ecx: f7505f9c edx: 00000000
esi: f8ead3a0 edi: 00000000 ebp: f8eac070 esp: f7505f40
ds: 007b es: 007b ss: 0068
Process knodemgrd_0 (pid: 3442, threadinfo=f7504000 task=f7d2a6b0)
Stack: c0241c28 f8eba388 f8eba364 f8eba36c f8eba2c0 f74c6c44 c028d408
f8eba388
f7505f9c f8eba30c 00000000 f74c6c3c f7505f9c f76077d8 f7505f9c
f8eadadd
f8eba2c0 f74c6c3c f7505f9c f8ead9a0 f75f8000 f76077d8 f75f8000
f76077d8
Call Trace:
[<c0241c28>] kobject_cleanup+0x98/0xa0
[<c028d408>] bus_for_each_dev+0x88/0xd0
[<f8eadadd>] nodemgr_node_probe+0x4d/0x130 [ieee1394]
[<f8ead9a0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<f8eadf48>] nodemgr_host_thread+0x188/0x1b0 [ieee1394]
[<f8eaddc0>] nodemgr_host_thread+0x0/0x1b0 [ieee1394]
[<c0106ea9>] kernel_thread_helper+0x5/0xc
Code: Bad EIP value.
<6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
-------------------------------------
[6.]
--------------------------------------
[7.]
-----------------------------------------
[7.1.]
-----------------------------------------
nm vmlinux | sort | less
-----------------------------------------
b7debdf0 A __crc_inet_accept
b7e2b4a5 A __crc_auth_domain_put
b7e555a9 A __crc_rpc_new_child
b7fdcaef A __crc_ide_bus_type
b8328626 A __crc_blk_queue_merge_bvec
b837c742 A __crc_deactivate_super
b8504b1c A __crc_read_cache_page
b8520a43 A __crc_auth_unix_add_addr
-------------------------------------
root@diogenis linux-2.6.3-rc2 # dmesg | ksymoops -v vmlinux -m System.map
-------------------------------------
ksymoops 2.4.9 on i686 2.6.3-rc2. Options used
-v vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.3-rc2/ (default)
-m System.map (specified)
Error (regular_file): read_ksyms stat /proc/ksyms failed
ksymoops: No such file or directory
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Machine check exception polling timer started.
8139too Fast Ethernet driver 0.9.27
Call Trace:
[<c0241b8d>] kobject_get+0x4d/0x50
[<c028c768>] get_device+0x18/0x30
[<c028d3eb>] bus_for_each_dev+0x6b/0xd0
[<f8eadadd>] nodemgr_node_probe+0x4d/0x130 [ieee1394]
[<f8ead9a0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<f8eadf48>] nodemgr_host_thread+0x188/0x1b0 [ieee1394]
[<f8eaddc0>] nodemgr_host_thread+0x0/0x1b0 [ieee1394]
[<c0106ea9>] kernel_thread_helper+0x5/0xc
Unable to handle kernel paging request at virtual address b828ec83
b828ec83
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<b828ec83>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: b828ec83 ebx: f8eba388 ecx: f7505f9c edx: 00000000
esi: f8ead3a0 edi: 00000000 ebp: f8eac070 esp: f7505f40
ds: 007b es: 007b ss: 0068
Stack: c0241c28 f8eba388 f8eba364 f8eba36c f8eba2c0 f74c6c44 c028d408
f8eba388
f7505f9c f8eba30c 00000000 f74c6c3c f7505f9c f76077d8 f7505f9c
f8eadadd
f8eba2c0 f74c6c3c f7505f9c f8ead9a0 f75f8000 f76077d8 f75f8000
f76077d8
Call Trace:
[<c0241c28>] kobject_cleanup+0x98/0xa0
[<c028d408>] bus_for_each_dev+0x88/0xd0
[<f8eadadd>] nodemgr_node_probe+0x4d/0x130 [ieee1394]
[<f8ead9a0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<f8eadf48>] nodemgr_host_thread+0x188/0x1b0 [ieee1394]
[<f8eaddc0>] nodemgr_host_thread+0x0/0x1b0 [ieee1394]
[<c0106ea9>] kernel_thread_helper+0x5/0xc
Code: Bad EIP value.
Trace; c0241b8d <kobject_get+4d/50>
Trace; c028c768 <get_device+18/30>
Trace; c028d3eb <bus_for_each_dev+6b/d0>
Trace; f8eadadd <__crc_device_suspend+54f4e/255e4e>
Trace; f8ead9a0 <__crc_device_suspend+54e11/255e4e>
Trace; f8eadf48 <__crc_device_suspend+553b9/255e4e>
Trace; f8eaddc0 <__crc_device_suspend+55231/255e4e>
Trace; c0106ea9 <kernel_thread_helper+5/c>
>>EIP; b828ec83 <__crc_ide_bus_type+2b2194/34bb37> <=====
>>eax; b828ec83 <__crc_ide_bus_type+2b2194/34bb37>
>>ebx; f8eba388 <__crc_device_suspend+617f9/255e4e>
>>ecx; f7505f9c <__crc_redraw_screen+18dbbb/4198ad>
>>esi; f8ead3a0 <__crc_device_suspend+54811/255e4e>
>>ebp; f8eac070 <__crc_device_suspend+534e1/255e4e>
>>esp; f7505f40 <__crc_redraw_screen+18db5f/4198ad>
Trace; c0241c28 <kobject_cleanup+98/a0>
Trace; c028d408 <bus_for_each_dev+88/d0>
Trace; f8eadadd <__crc_device_suspend+54f4e/255e4e>
Trace; f8ead9a0 <__crc_device_suspend+54e11/255e4e>
Trace; f8eadf48 <__crc_device_suspend+553b9/255e4e>
Trace; f8eaddc0 <__crc_device_suspend+55231/255e4e>
Trace; c0106ea9 <kernel_thread_helper+5/c>
1 error issued. Results may not be reliable.
-------------------------------------------------------------------------
root@diogenis linux-2.6.3-rc2 # sh scripts/ver_linux
---------------------------------------------------------------
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux diogenis 2.6.3-rc2 #1 SMP Tue Feb 10 05:37:34 GMT 2004 i686 AMD
Athlon(tm) MP 1600+ AuthenticAMD GNU/Linux
Gnu C 3.3.2
Gnu make 3.80
util-linux 2.12
mount 2.12
module-init-tools 0.9.15-pre4
e2fsprogs 1.34
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.15
Net-tools 1.60
Kbd 1.08
Sh-utils 5.0.91
Modules Loaded parport_pc lp parport ohci_hcd emu10k1_gp
gameport ohci1394 ieee1394 snd_seq_midi snd_emu10k1_synth snd_emux_synth
snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec
snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq
snd_seq_device snd_pcm_oss snd_pcm snd_page_alloc snd_timer
snd_mixer_oss snd soundcore ide_floppy usblp usbcore 8139too mii crc32
---------------------------------------
[7.2.]
--------------------------------------
root@diogenis linux-2.6.3-rc2 # cat /proc/cpuinfo
---------------------------------------------
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) MP 1600+
stepping : 2
cpu MHz : 1399.845
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2768.89
processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1399.845
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2793.47
---------------------------------------
[7.3.]
---------------------------------------
root@diogenis linux-2.6.3-rc2 # cat /proc/modules
-------------------------------------
parport_pc 40000 1 - Live 0xf8ed8000
lp 11428 0 - Live 0xf8dc0000
parport 45096 2 parport_pc,lp, Live 0xf8ecb000
ohci_hcd 19652 0 - Live 0xf8e97000
emu10k1_gp 3584 0 - Live 0xf8d35000
gameport 4992 1 emu10k1_gp, Live 0xf8de6000
ohci1394 36676 0 - Live 0xf8e8d000
ieee1394 83568 1 ohci1394, Live 0xf8ea6000
snd_seq_midi 8544 0 - Live 0xf8db2000
snd_emu10k1_synth 8128 0 - Live 0xf8daf000
snd_emux_synth 40064 1 snd_emu10k1_synth, Live 0xf8e82000
snd_seq_virmidi 8000 1 snd_emux_synth, Live 0xf8d67000
snd_seq_midi_emul 8000 1 snd_emux_synth, Live 0xf8d5d000
snd_emu10k1 101060 2 snd_emu10k1_synth, Live 0xf8df3000
snd_rawmidi 25760 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1, Live
0xf8db8000
snd_ac97_codec 63492 1 snd_emu10k1, Live 0xf8dc4000
snd_util_mem 4544 2 snd_emux_synth,snd_emu10k1, Live 0xf8d60000
snd_hwdep 9632 2 snd_emux_synth,snd_emu10k1, Live 0xf8d37000
snd_seq_oss 36224 0 - Live 0xf8d6a000
snd_seq_midi_event 8128 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss, Live
0xf8d5a000
snd_seq 59408 8
snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event,
Live 0xf8d9f000
snd_seq_device 8200 7
snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_oss,snd_seq,
Live 0xf8d56000
snd_pcm_oss 54564 0 - Live 0xf8d90000
snd_pcm 103072 2 snd_emu10k1,snd_pcm_oss, Live 0xf8d75000
snd_page_alloc 12164 2 snd_emu10k1,snd_pcm, Live 0xf8d3b000
snd_timer 27204 2 snd_seq,snd_pcm, Live 0xf8d3f000
snd_mixer_oss 19968 2 snd_pcm_oss, Live 0xf8cf5000
snd 56292 16
snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss,
Live 0xf8d47000
soundcore 10656 2 snd, Live 0xf8d31000
ide_floppy 19072 0 - Live 0xf896b000
usblp 13504 0 - Live 0xf8966000
usbcore 108444 4 ohci_hcd,usblp, Live 0xf8986000
8139too 25664 0 - Live 0xf895e000
mii 5120 1 8139too, Live 0xf8952000
crc32 4416 1 8139too, Live 0xf894f000
-----------------------------------------------
[7.4.]
--------------------------------------
root@diogenis linux-2.6.3-rc2 # cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-10ff : 0000:00:0b.0
1000-10ff : 8139too
1400-141f : 0000:00:0c.0
1400-141f : EMU10K1
1430-143f : 0000:00:08.0
1430-1437 : ide2
1438-143f : ide3
1440-1443 : 0000:00:00.0
1444-1447 : 0000:00:08.0
1446-1446 : ide3
1448-144f : 0000:00:08.0
1448-144f : ide3
1450-1453 : 0000:00:08.0
1452-1452 : ide2
1458-145f : 0000:00:08.0
1458-145f : ide2
1460-1467 : 0000:00:0c.1
1460-1467 : emu10k1-gp
f000-f00f : 0000:00:07.1
f000-f007 : ide0
f008-f00f : ide1
root@diogenis linux-2.6.3-rc2 # cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000dc000-000dcfff : 0000:00:07.4
000dc000-000dcfff : ohci_hcd
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-0034431a : Kernel code
0034431b-0042013f : Kernel data
3fff0000-3ffffbff : ACPI Tables
3ffffc00-3fffffff : ACPI Non-volatile Storage
e8000000-e8003fff : 0000:00:08.0
e8004000-e8007fff : 0000:00:0c.2
e8009000-e80097ff : 0000:00:0c.2
e8009000-e80097ff : ohci1394
e8009800-e80098ff : 0000:00:0b.0
e8009800-e80098ff : 8139too
e9000000-e9ffffff : PCI Bus #01
e9000000-e9ffffff : 0000:01:05.0
ea000000-ea000fff : 0000:00:00.0
ec000000-efffffff : 0000:00:00.0
f0000000-f7ffffff : PCI Bus #01
f0000000-f7ffffff : 0000:01:05.0
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
------------------------------------
[7.5.]
------------------------------------
root@diogenis linux-2.6.3-rc2 # lspci -vvv
------------------------------------------
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
System Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at ea000000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at 1440 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit-
FW- Rate=x4
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e9000000-e9ffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ISA
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-766 [ViperPlus]
IDE (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ACPI
(rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-766 [ViperPlus]
USB (rev 07) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at 000dc000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Unknown mass storage controller: Promise Technology, Inc. 20268
(rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100TX2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 4500ns max), cache line size 10
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1458 [size=8]
Region 1: I/O ports at 1450 [size=4]
Region 2: I/O ports at 1448 [size=8]
Region 3: I/O ports at 1444 [size=4]
Region 4: I/O ports at 1430 [size=16]
Region 5: Memory at e8000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at e8009800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0c.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1400 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 Input device controller: Creative Labs SB Audigy MIDI/Game port
(rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Game Port
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at 1460 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
(prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), cache line size 10
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e8009000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
01:05.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2
MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
------------------------------------
[7.6.] no scsi
-----------------------------------
reply other threads:[~2004-02-11 6:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4029CF14.1090609@dsl.pipex.com \
--to=x@dsl.pipex.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.