From: Edenyard <mail@edenyard.co.uk>
To: Ryan Underwood <nemesis-lists@icequake.net>
Cc: linux-msdos@vger.kernel.org
Subject: Re: Can I use DOSEMU for testing device driver code?
Date: Mon, 16 Feb 2004 11:27:30 +0000 [thread overview]
Message-ID: <4030A922.5040306@edenyard.co.uk> (raw)
In-Reply-To: <20040215045827.GB20725@dbz.icequake.net>
Ryan Underwood wrote:
> First use setserial to disable Linux's
> use of the port though.
Reading the man page for setserial, it seems that the way to disable
the port (/dev/ttyS0) is: 'setserial /dev/ttyS0 uart none'. Is that
correct? When I try that (as root), although it doesn't issue any error
message, it doesn't disable /dev/ttyS0 either. When I subsequently do
'setserial /dev/ttyS0' to check, it merely says that the UART is
unknown, but that ttyS0 is STILL using IRQ4 and port address 0x3f8.
How do I get to disable ttyS0 completely so that DOSEMU can have
direct access to it?
TIA,
Gerald.
next prev parent reply other threads:[~2004-02-16 11:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-12 21:53 Can I use DOSEMU for testing device driver code? easlab
2004-02-13 8:17 ` Edenyard
2004-02-13 12:01 ` Bart Oldeman
2004-02-14 12:52 ` Edenyard
2004-02-15 4:58 ` Ryan Underwood
2004-02-16 11:27 ` Edenyard [this message]
2004-02-17 7:52 ` Ryan Underwood
2004-02-17 9:36 ` Ged Haywood
2004-02-15 5:04 ` Ryan Underwood
[not found] <4034D439.5080308@edenyard.co.uk>
2004-02-19 18:36 ` Ged Haywood
-- strict thread matches above, loose matches on Subject: below --
2004-02-15 11:15 Stas Sergeev
2004-02-13 20:12 Stas Sergeev
2004-02-12 6:11 synthespian
2004-02-12 10:15 ` Ryan Underwood
2004-02-14 19:00 ` EL Henry
2004-02-15 4:53 ` Ryan Underwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4030A922.5040306@edenyard.co.uk \
--to=mail@edenyard.co.uk \
--cc=linux-msdos@vger.kernel.org \
--cc=nemesis-lists@icequake.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.