All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Brown <jbrown@emergence.uk.net>
To: Linus Torvalds <torvalds@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Linux 2.6.3-rc4
Date: Tue, 17 Feb 2004 18:56:46 +0000	[thread overview]
Message-ID: <403263EE.9010609@emergence.uk.net> (raw)
In-Reply-To: <Pine.LNX.4.58.0402161945540.30742@home.osdl.org>

Linus Torvalds wrote:
> Ok,
>  I'm planning on doing the final 2.6.3 tomorrow, so please test this 
> final -rc.
> 
> Most notably, this should support ppc/ppc64 out-of-the-box, complete with
> G5 support (64-bit). Special thanks to BenH who made sure the new radeonfb
> driver works on a wide variety of hardware (a number of the fixes here
> relative to -rc3 was making sure the driver works on regular x86 laptops).

There are still two problems with the radeonfb on my IBM X31:

1) The screen is garbled when the fb kicks in at boot - its not 
converting the text from the VGA console correctly. I have a photo of 
this here: http://emergence.uk.net/radeonfb_corruption.jpeg

2) If I run X and then exit X or switch to a fb vt then the bottom line 
doesn't clear when scrolling and running `clear` only clears the middle 
line of pixels on each line of text.

radeonfb_pci_register BEGIN
radeonfb: probed DDR SGRAM 16384k videoram
radeonfb: mapped 16384k videoram
radeonfb: Invalid ROM signature 0 should be 0xaa55
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=144.00 Mhz, 
System=144.00 MHz
1 chips in connector info
  - chip 1 has 1 connectors
   * connector 0 of type 2 (CRT) : 2300
Starting monitor auto detection...
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
BIOS provided panel power delay: 1000
radeondb: BIOS provided dividers will be used
ref_divider = 8
post_divider = 2
fbk_divider = 4d
Scanning BIOS table ...
  320 x 350
  320 x 400
  320 x 400
  320 x 480
  400 x 600
  512 x 384
  640 x 350
  640 x 400
  640 x 475
  640 x 480
  720 x 480
  720 x 576
  800 x 600
  848 x 480
  1024 x 768
Found panel in BIOS table:
   hblank: 320
   hOver_plus: 16
   hSync_width: 136
   vblank: 38
   vOver_plus: 2
   vSync_width: 6
   clock: 6500
Setting up default mode based on panel info
radeonfb: Power Management enabled for Mobility chipsets
radeonfb: ATI Radeon LY  DDR SGRAM 16 MB
radeonfb_pci_register END


Jonathan Brown
http://emergence.uk.net/

  parent reply	other threads:[~2004-02-17 18:56 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-17  3:51 Linux 2.6.3-rc4 Linus Torvalds
2004-02-17  6:19 ` Felix Seeger
2004-02-17  8:54 ` Martin Diehl
2004-02-17  9:27   ` Martin Diehl
2004-02-17 15:39   ` Bartlomiej Zolnierkiewicz
2004-02-17 16:21 ` Linux 2.6.3-rc4 (compile stats) John Cherry
2004-02-17 18:45 ` Linux 2.6.3-rc4 GCS
2004-02-17 19:09   ` Linus Torvalds
2004-02-17 20:05     ` Adrian Bunk
2004-02-17 20:16       ` Linus Torvalds
2004-02-17 22:59         ` Adrian Bunk
2004-02-17 23:11           ` Linus Torvalds
2004-02-17 23:37             ` Radeon issue on x86 Benjamin Herrenschmidt
2004-02-18  0:17               ` Linus Torvalds
2004-02-18  0:33                 ` Benjamin Herrenschmidt
2004-02-18  0:00             ` Linux 2.6.3-rc4 Adrian Bunk
2004-02-18  1:28               ` Roman Zippel
2004-02-18  0:39             ` Roman Zippel
2004-02-18  1:06             ` Roman Zippel
2004-02-18  2:45           ` Roman Zippel
2004-02-18  2:58             ` Linus Torvalds
2004-02-18  0:15       ` Roman Zippel
2004-02-18  0:21     ` GCS
2004-02-17 18:56 ` Jonathan Brown [this message]
2004-02-17 19:06   ` Linus Torvalds
2004-02-18 10:18   ` Andreas Happe
2004-02-18  4:06 ` Stephen Rothwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=403263EE.9010609@emergence.uk.net \
    --to=jbrown@emergence.uk.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.