From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ryser Date: Fri, 20 Feb 2004 17:49:32 -0800 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform Message-ID: <4036B92C.4040507@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a patch that adds support for the Xilinx ML300 platform to U-Boot. Some documentation is provided in doc/README.ml300. The CHANGELOG entry is attached to this email. Please apply the patch to the repository. Thanks and with best regards, - Peter -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: CHANGELOG Url: http://lists.denx.de/pipermail/u-boot/attachments/20040220/3d002a47/attachment.txt From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Welliington Date: Sat, 21 Feb 2004 12:46:45 -0700 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <4036B92C.4040507@xilinx.com> References: <4036B92C.4040507@xilinx.com> Message-ID: <4037B5A5.3030407@lucent.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20040221/a3f36427/attachment.htm From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sat, 21 Feb 2004 21:45:31 +0100 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: Your message of "Sat, 21 Feb 2004 12:46:45 MST." <4037B5A5.3030407@lucent.com> Message-ID: <20040221204536.7A375C1092@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <4037B5A5.3030407@lucent.com> you wrote: > > > > > > > Please do not send HTML messages. Please send plain text only. Message unreadable, ignored. Sorry. Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de I think there's a world market for about five computers. -- attr. Thomas J. Watson (Chairman of the Board, IBM), 1943 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Wellington Date: Sun, 22 Feb 2004 14:23:20 -0700 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <4037B5A5.3030407@lucent.com> References: <4036B92C.4040507@xilinx.com> <4037B5A5.3030407@lucent.com> Message-ID: <40391DC8.5080506@lucent.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Mike Welliington wrote: > Great! - I've been working on a port of PPCBoot to the ML300, but got > yanked off to work on our kernel port, which we are booting without a > bootloader for the time being. But I knew I was going to have to > come back and finish the port anyway - you just saved me. > > I'm new to U-Boot so: > > 1) Is this patch intended to be applied to U-Boot 1.0.0 ? > > 2) Where can I find out how to apply the patch? > >Best Regards, > >-mike wellington > wellington at lucent.com > Denver, Colorado, USA > > > > > > > > Peter Ryser wrote: > >> At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a >> patch that adds support for the Xilinx ML300 platform to U-Boot. Some >> documentation is provided in doc/README.ml300. >> >> The CHANGELOG entry is attached to this email. >> >> Please apply the patch to the repository. >> >> Thanks and with best regards, >> - Peter >> >>------------------------------------------------------------------------ >> >>* Patch by Peter Ryser, 20 Feb 2004: >> Add support for the Xilinx ML300 platform >> (http://www.xilinx.com/ml300). >> >> >> >> >> >> >> > > ------------------------------------------------------- SF.Net is > sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & > Web services for Linux with a free DVD software kit from IBM. Click > Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ U-Boot-Users mailing > list U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sat, 21 Feb 2004 23:06:48 +0100 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: Your message of "Sun, 22 Feb 2004 14:23:20 MST." <40391DC8.5080506@lucent.com> Message-ID: <20040221220653.33A9CC1092@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <40391DC8.5080506@lucent.com> you wrote: > > > Great! - I've been working on a port of PPCBoot to the ML300, but got > > yanked off to work on our kernel port, which we are booting without a > > bootloader for the time being. But I knew I was going to have to > > come back and finish the port anyway - you just saved me. > > > > I'm new to U-Boot so: > > > > 1) Is this patch intended to be applied to U-Boot 1.0.0 ? No, more likely to a recent version like 1.0.2 or top-of-tree. > > 2) Where can I find out how to apply the patch? Type: "man patch". Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Karl's version of Parkinson's Law: Work expands to exceed the time alloted it. From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Wellington Date: Sun, 22 Feb 2004 15:20:36 -0700 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <20040221220653.33A9CC1092@atlas.denx.de> References: <20040221220653.33A9CC1092@atlas.denx.de> Message-ID: <40392B34.5060409@lucent.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de How do I get the top-of-tree? -mike Wolfgang Denk wrote: >No, more likely to a recent version like 1.0.2 or top-of-tree. > > > From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Wellington Date: Sun, 22 Feb 2004 15:43:06 -0700 Subject: [U-Boot-Users] Re: U-Boot 1.0.2 sources In-Reply-To: <40392B34.5060409@lucent.com> References: <20040221220653.33A9CC1092@atlas.denx.de> <40392B34.5060409@lucent.com> Message-ID: <4039307A.5070809@lucent.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Never mind. I found the 1.0.2 tar ball. Downloading now... -mike w.. Mike Wellington wrote: > How do I get the top-of-tree? > > -mike > > Wolfgang Denk wrote: > >> No, more likely to a recent version like 1.0.2 or top-of-tree. >> >> >> > > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sat, 21 Feb 2004 23:53:45 +0100 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: Your message of "Sun, 22 Feb 2004 15:20:36 MST." <40392B34.5060409@lucent.com> Message-ID: <20040221225350.7764EC1092@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <40392B34.5060409@lucent.com> you wrote: > How do I get the top-of-tree? "cvs checkout" ? See http://www.cvshome.org/docs/manual/cvs-1.11.13/cvs.html Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Many aligators will be slain, but the swamp will remain. From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sat, 21 Feb 2004 23:54:23 +0100 Subject: [U-Boot-Users] Re: U-Boot 1.0.2 sources In-Reply-To: Your message of "Sun, 22 Feb 2004 15:43:06 MST." <4039307A.5070809@lucent.com> Message-ID: <20040221225428.30A4EC1092@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <4039307A.5070809@lucent.com> you wrote: > Never mind. I found the 1.0.2 tar ball. > Downloading now... You should learn to use CVS nevertheless. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Shakespeare's Law of Prototyping: (Hamlet III, iv, 156-160) O, throw away the worser part of it, And live the purer with the other half. From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ryser Date: Sat, 21 Feb 2004 15:09:39 -0800 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <20040221204536.7A375C1092@atlas.denx.de> References: <20040221204536.7A375C1092@atlas.denx.de> Message-ID: <4037E533.4050605@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Wolfgang et al., here is the relevant message in plain text: At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a patch that adds support for the Xilinx ML300 platform to U-Boot. Some documentation is provided in doc/README.ml300. The CHANGELOG entry follows further down. Please apply the patch to the repository. Thanks and with best regards, - Peter CHANGELOG entry: * Patch by Peter Ryser, 20 Feb 2004: Add support for the Xilinx ML300 platform (http://www.xilinx.com/ml300). Wolfgang Denk wrote: >In message <4037B5A5.3030407@lucent.com> you wrote: > > >> >> >> >> >> >> >> >> >> > > >Please do not send HTML messages. > >Please send plain text only. > >Message unreadable, ignored. Sorry. > > > >Wolfgang Denk > > > From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ryser Date: Sat, 21 Feb 2004 15:24:23 -0800 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <4037B5A5.3030407@lucent.com> References: <4036B92C.4040507@xilinx.com> <4037B5A5.3030407@lucent.com> Message-ID: <4037E8A7.1010909@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Mike, the patch applies cleanly against the latest CVS kernel tree. After checking out the CVS tree from sourceforge (see http://sourceforge.net/cvs/?group_id=65938 for instructions, use u-boot as modulename) change into the root directory of U-Boot and do: $ gzip -cd ml300.patch.gz | patch -p1 -F0 --dry-run If that goes well remove --dry-run to really apply the patch. - Peter Mike Welliington wrote: > Great! - I've been working on a port of PPCBoot to the ML300, but got > yanked off to work on our kernel port, which we are booting without a > bootloader for the time being. But I knew I was going to have to > come back and finish the port anyway - you just saved me. > > I'm new to U-Boot so: > > 1) Is this patch intended to be applied to U-Boot 1.0.0 ? > > 2) Where can I find out how to apply the patch? > >Best Regards, > >-mike wellington > wellington at lucent.com > Denver, Colorado, USA > > > > > > > > Peter Ryser wrote: > >> At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a >> patch that adds support for the Xilinx ML300 platform to U-Boot. Some >> documentation is provided in doc/README.ml300. >> >> The CHANGELOG entry is attached to this email. >> >> Please apply the patch to the repository. >> >> Thanks and with best regards, >> - Peter >> >>------------------------------------------------------------------------ >> >>* Patch by Peter Ryser, 20 Feb 2004: >> Add support for the Xilinx ML300 platform >> (http://www.xilinx.com/ml300). >> >> >> >> >> >> >> > > ------------------------------------------------------- SF.Net is > sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & > Web services for Linux with a free DVD software kit from IBM. Click > Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ U-Boot-Users mailing > list U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Wellington Date: Sat, 21 Feb 2004 18:42:49 -0700 Subject: [U-Boot-Users] Re: U-Boot 1.0.2 sources In-Reply-To: <20040221225428.30A4EC1092@atlas.denx.de> References: <20040221225428.30A4EC1092@atlas.denx.de> Message-ID: <40380919.5000407@lucent.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20040221/beb94cbb/attachment.htm From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Wellington Date: Sat, 21 Feb 2004 18:49:01 -0700 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <4037E8A7.1010909@xilinx.com> References: <4036B92C.4040507@xilinx.com> <4037B5A5.3030407@lucent.com> <4037E8A7.1010909@xilinx.com> Message-ID: <40380A8D.5090902@lucent.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Peter- Thanks. I had already applied the patch incorrectly and mangled my build tree. But I re-un-hacked it and I am now building u-boot for the ML300. I have downloaded it and it is running right now. If I start having unexplainable problems I'll start fresh with the latest top-of-tree and re-apply the patch according to your instructions. All I need to do is to figure out how to set the ethernet address (no help needed here) and download my kernel which is already built. I may be gone for an hour or two - getting hungry, may walk over to CB & Potts for dinner but I'll be back. Thanks a million! -mike Peter Ryser wrote: > Mike, > > the patch applies cleanly against the latest CVS kernel tree. After > checking out the CVS tree from sourceforge (see > http://sourceforge.net/cvs/?group_id=65938 for instructions, use > u-boot as modulename) change into the root directory of U-Boot and do: > $ gzip -cd ml300.patch.gz | patch -p1 -F0 --dry-run > > If that goes well remove --dry-run to really apply the patch. > > - Peter > > > Mike Welliington wrote: > >> Great! - I've been working on a port of PPCBoot to the ML300, but got >> yanked off to work on our kernel port, which we are booting without a >> bootloader for the time being. But I knew I was going to have to >> come back and finish the port anyway - you just saved me. >> >> I'm new to U-Boot so: >> >> 1) Is this patch intended to be applied to U-Boot 1.0.0 ? >> >> 2) Where can I find out how to apply the patch? >> >> Best Regards, >> >> -mike wellington >> wellington at lucent.com >> Denver, Colorado, USA >> >> >> >> >> >> >> >> Peter Ryser wrote: >> >>> At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a >>> patch that adds support for the Xilinx ML300 platform to U-Boot. >>> Some documentation is provided in doc/README.ml300. >>> >>> The CHANGELOG entry is attached to this email. >>> >>> Please apply the patch to the repository. >>> >>> Thanks and with best regards, >>> - Peter >>> >>> ------------------------------------------------------------------------ >>> >>> >>> * Patch by Peter Ryser, 20 Feb 2004: >>> Add support for the Xilinx ML300 platform >>> (http://www.xilinx.com/ml300). >>> >>> >>> >>> >>> >>> >>> >> >> ------------------------------------------------------- SF.Net is >> sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps >> & Web services for Linux with a free DVD software kit from IBM. Click >> Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click >> _______________________________________________ U-Boot-Users mailing >> list U-Boot-Users at lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users -- =mike wellington wellington at lucent.com 303.920.6412 Desk 720.434.7559 Cell From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Tue, 24 Feb 2004 01:37:21 +0100 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: Your message of "Fri, 20 Feb 2004 17:49:32 PST." <4036B92C.4040507@xilinx.com> Message-ID: <20040224003726.BC096C0655@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <4036B92C.4040507@xilinx.com> you wrote: > > At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a > patch that adds support for the Xilinx ML300 platform to U-Boot. Some > documentation is provided in doc/README.ml300. I understand this is the same patch you sent before which got rejected because of the list's attachment size limit? Can you please verify that the code in CVS is complete and up to date? Thanks. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de "In matters of principle, stand like a rock; in matters of taste, swim with the current." - Thomas Jefferson From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ryser Date: Mon, 23 Feb 2004 16:44:09 -0800 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <20040224003726.BC096C0655@atlas.denx.de> References: <20040224003726.BC096C0655@atlas.denx.de> Message-ID: <403A9E59.8000201@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de >I understand this is the same patch you sent before which got >rejected because of the list's attachment size limit? > Yes, that's correct. >Can you please verify that the code in CVS is complete and up to date? > I just did an update as well as a complete checkout and cannot (yet?) see the code. I will try again later. - Peter From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Tue, 24 Feb 2004 02:06:27 +0100 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: Your message of "Mon, 23 Feb 2004 16:44:09 PST." <403A9E59.8000201@xilinx.com> Message-ID: <20040224010632.C8E53C0655@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Peter, in message <403A9E59.8000201@xilinx.com> you wrote: > > >I understand this is the same patch you sent before which got > >rejected because of the list's attachment size limit? > > > Yes, that's correct. Thanks for the confirmation. > >Can you please verify that the code in CVS is complete and up to date? > > > I just did an update as well as a complete checkout and cannot (yet?) > see the code. I will try again later. Please do. Updates and access to SourceForge's anonymous server is always awfully slow. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Is the glass half empty, half full, or twice as large as it needs to From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ryser Date: Mon, 23 Feb 2004 20:00:03 -0800 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <20040224010632.C8E53C0655@atlas.denx.de> References: <20040224010632.C8E53C0655@atlas.denx.de> Message-ID: <403ACC43.2030302@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Wolfgang, the code for the Xilinx ML300 checks out, compiles, and works as expected. Thanks, - Peter >>I just did an update as well as a complete checkout and cannot (yet?) >>see the code. I will try again later. >> >> > >Please do. Updates and access to SourceForge's anonymous server is >always awfully slow. > >Best regards, > >Wolfgang Denk > > >