From: Go Taniguchi <go@turbolinux.co.jp>
To: Andrew Morton <akpm@osdl.org>
Cc: john stultz <johnstul@us.ibm.com>, linux-kernel@vger.kernel.org
Subject: Re: 2.6.3-mm3 hangs on boot x440 (scsi?)
Date: Thu, 26 Feb 2004 23:40:35 +0900 [thread overview]
Message-ID: <403E0563.9050007@turbolinux.co.jp> (raw)
In-Reply-To: <20040224170645.392abcff.akpm@osdl.org>
Hi,
Andrew Morton wrote:
> john stultz <johnstul@us.ibm.com> wrote:
>
>> Booting 2.6.3-mm3 on an x440 hangs the box during the SCSI probe after
>>the following:
>>
>>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
>> <Adaptec aic7899 Ultra160 SCSI adapter>
>> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>>
>>
>>I went back to 2.6.3-mm1 (as it was a smaller diff) and the problem was
>>there as well.
>
>
> Could you try reverting aic7xxx-deadlock-fix.patch? Also, add
> initcall_debug to the boot command just so we know we aren't blaming the
> wrong thing.
>
> Apart from that, gosh. Maybe you could add just linus.patch and
> bk-scsi.patch, see if that hangs too? Or just test the latest linus tree -
> the scsi changes were merged this morning. Thanks.
>
Problem patch is expanded-pci-config-space.patch.
x440 can not enable acpi by dmi_scan.
expanded-pci-config-space.patch need acpi support.
So, kernel can not get x440's xAPIC interrupt.
next prev parent reply other threads:[~2004-02-26 14:48 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-23 1:22 2.6.3-mm3 Andrew Morton
2004-02-23 1:43 ` 2.6.3-mm3 Nick Piggin
2004-02-23 1:55 ` 2.6.3-mm3 Andrew Morton
2004-02-23 2:02 ` 2.6.3-mm3 Nick Piggin
2004-02-23 2:51 ` 2.6.3-mm3 Nick Piggin
2004-02-23 3:04 ` 2.6.3-mm3 Nick Piggin
2004-02-23 8:08 ` 2.6.3-mm3 Nick Piggin
2004-02-23 8:48 ` [PATCH] vm-fix-all_zones_ok (was Re: 2.6.3-mm3) Nick Piggin
2004-02-23 8:59 ` Andrew Morton
2004-02-23 9:21 ` Nick Piggin
2004-02-23 9:24 ` Andrew Morton
2004-02-23 16:23 ` Bill Davidsen
2004-02-23 22:47 ` Chris Wedgwood
2004-02-24 4:11 ` Nick Piggin
2004-02-24 9:12 ` Chris Wedgwood
2004-02-24 9:22 ` Andrew Morton
2004-02-24 9:30 ` Chris Wedgwood
2004-02-24 9:37 ` Andrew Morton
2004-02-24 20:55 ` Rik van Riel
2004-02-24 22:36 ` Andrew Morton
2004-02-24 22:41 ` Rik van Riel
2004-02-23 2:19 ` 2.6.3-mm3 Christoph Hellwig
2004-02-23 2:52 ` 2.6.3-mm3 Joshua Kwan
2004-02-23 3:34 ` 2.6.3-mm3 Joshua Kwan
2004-02-23 18:09 ` [patch] 2.6.3-mm3: ALSA miXart driver doesn't compile Adrian Bunk
2004-02-23 18:58 ` 2.6.3-mm3 (compile stats) John Cherry
2004-02-23 20:00 ` Sam Ravnborg
2004-02-24 22:22 ` 2.6.3-mm3 Mike Fedyk
2004-02-24 22:30 ` 2.6.3-mm3 Andrew Morton
2004-02-25 21:27 ` 2.6.3-mm3 Mike Fedyk
2004-02-26 1:06 ` 2.6.3-mm3 Nick Piggin
2004-02-26 1:18 ` 2.6.3-mm3 Marc-Christian Petersen
2004-02-26 1:28 ` 2.6.3-mm3 Mike Fedyk
2004-02-26 1:32 ` 2.6.3-mm3 Mike Fedyk
2004-02-26 1:52 ` 2.6.3-mm3 Nick Piggin
2004-02-26 2:34 ` 2.6.3-mm3 Mike Fedyk
2004-02-26 2:40 ` 2.6.3-mm3 Nick Piggin
2004-02-26 2:48 ` 2.6.3-mm3 Mike Fedyk
2004-02-26 3:05 ` 2.6.3-mm3 Nick Piggin
2004-02-26 3:19 ` 2.6.3-mm3 Mike Fedyk
2004-02-26 3:29 ` 2.6.3-mm3 Nick Piggin
2004-02-26 4:08 ` 2.6.3-mm3 Mike Fedyk
2004-02-26 4:56 ` 2.6.3-mm3 Mike Fedyk
2004-02-27 19:02 ` 2.6.3-mm3 Mike Fedyk
2004-02-27 21:57 ` 2.6.3-mm3 Nick Piggin
2004-02-25 0:26 ` 2.6.3-mm3 hangs on boot x440 (scsi?) john stultz
2004-02-25 1:06 ` Andrew Morton
2004-02-25 1:22 ` john stultz
2004-02-25 1:27 ` john stultz
2004-02-25 1:48 ` Andrew Morton
2004-02-25 22:15 ` john stultz
2004-02-26 14:40 ` Go Taniguchi [this message]
2004-02-26 21:26 ` john stultz
2004-02-26 23:02 ` john stultz
2004-02-26 23:15 ` Matthew Wilcox
2004-02-27 0:14 ` john stultz
2004-02-27 0:58 ` john stultz
2004-02-27 2:25 ` john stultz
2004-02-25 1:15 ` [PATCH 2.6.3-mm3] serialize_writeback_fdatawait patch Daniel McNeil
2004-02-25 1:43 ` Andrew Morton
2004-02-25 22:56 ` Daniel McNeil
2004-02-25 2:51 ` 2.6.3-mm3 Mike Fedyk
2004-02-25 3:09 ` 2.6.3-mm3 Andrew Morton
2004-02-25 3:34 ` 2.6.3-mm3 Mike Fedyk
2004-02-25 10:47 ` 2.6.3-mm3 sometimes freeze on "sync" Helge Hafting
2004-02-25 9:39 ` Andrew Morton
2004-02-26 8:49 ` Helge Hafting
2004-02-27 14:49 ` Alexander Hoogerhuis
2004-02-27 23:34 ` 2.6.3-mm3 john stultz
2004-02-28 0:06 ` 2.6.3-mm3 Andrew Morton
2004-02-28 2:48 ` 2.6.3-mm3 (ioremap failure w/ _X86_4G and _NUMA) john stultz
2004-02-28 3:18 ` Dave Hansen
2004-02-28 4:34 ` Martin J. Bligh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=403E0563.9050007@turbolinux.co.jp \
--to=go@turbolinux.co.jp \
--cc=akpm@osdl.org \
--cc=johnstul@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.