From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Furniss Date: Sun, 29 Feb 2004 10:14:51 +0000 Subject: Re: [LARTC] ESFQ question Message-Id: <4041BB9B.7030608@dsl.pipex.com> List-Id: References: <40314FDA.10508@skyraven.pcnet.ro> In-Reply-To: <40314FDA.10508@skyraven.pcnet.ro> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Mihai Tanasescu wrote: > Hello, > > I've seen that esfq can do flows based on src/dest addresses. > > I have a small lan with private ip's. > I guess that in my case esfq would only work for the download part as > for the upload esfq only sees the src address = the NAT address (as I > can figure from KPTD). > > > Is there any solution for this ? > (regarding esfq ..not by using iptables -j MARK and setting up different > classes for everyone....and using sfq) If you use IMQ it's the same, but there is a NAT patch which lets ingress work properly - maybe it would be possible to make a patch that does the same for egress. Andy. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/