From: Thomas Steudten <alpha@steudten.com>
To: linux-kernel@vger.kernel.org
Subject: Msg from scsi aic7xxx driver or PCI layer on alpha
Date: Fri, 12 Mar 2004 16:42:59 +0100 [thread overview]
Message-ID: <4051DA83.90902@steudten.com> (raw)
Hi
I got this messages from the pci allocator and the
scsi aic7xxx driver on kernel 2.6.4 on alpha after
reboot: (why is this driver don´t using dma?)
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
[..]
scsi0:A:3:0: Tagged Queuing enabled. Depth 128
PCI: Enabling device: (0000:00:07.0), cmd 7
XXX PCI: Unable to reserve mem region #2:1000@a051000 for device 0000:00:07.0
aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 0/7/0
XXX aic7xxx: I/O ports already in use, ignoring.
lspci -vv gives
00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 8400 [size=256]
Region 1: Memory at 000000000a051000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at 000000000a040000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
Tom
LINUX user since kernel 0.99.x 1994.
RPM Alpha packages at http://alpha.steudten.com/packages
Want to know what S.u.S.E 1995 cdrom-set contains?
next reply other threads:[~2004-03-12 15:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-12 15:42 Thomas Steudten [this message]
2004-03-12 22:55 ` Msg from scsi aic7xxx driver or PCI layer on alpha Ivan Kokshaysky
-- strict thread matches above, loose matches on Subject: below --
2004-03-11 21:56 Thomas Steudten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4051DA83.90902@steudten.com \
--to=alpha@steudten.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.