From: Sergey Matveychuk <sem@ciam.ru>
To: The development of GRUB 2 <grub-devel@gnu.org>
Subject: Re: GRUB2: *BSD and more patch
Date: Sun, 21 Mar 2004 04:17:47 +0300 [thread overview]
Message-ID: <405CED3B.4090407@ciam.ru> (raw)
In-Reply-To: <87brmr1eyq.fsf@marco.marco-g.com>
[-- Attachment #1: Type: text/plain, Size: 495 bytes --]
Marco Gerards wrote:
> Does pupa-emu work for you after this patch is applied?
Oops. A little typo in the last patch (#ifdev instead of #ifdef).
It's all right now.
Really I still need a little hack for Makefiles to build grub2 on
FreeBSD out of box (for -I and -L switches). I guess it should be done
with autotools but I don't know how yet. And I'd like to make notice in
README file for dd command differs for FreeBSD (may be for all BSD?).
So I plan to send once more patch.
--
Sem.
[-- Attachment #2: grub2-bsd.patch --]
[-- Type: text/plain, Size: 7153 bytes --]
diff -ruNp grub2/ChangeLog grub2.test/ChangeLog
--- grub2/ChangeLog Fri Mar 19 23:55:21 2004
+++ grub2.test/ChangeLog Sat Mar 20 20:57:56 2004
@@ -1,3 +1,21 @@
+2004-03-15 Sergey Matveychuk <sem@ciam.ru>
+
+ * configure.ac: Added detection of malloc.h and memalign().
+ * util/i386/pc/biosdisk.c: Added sys/ioctl.h, sys/disklabel.h for
+ BSD, sys/param.h for FreeBSD and sys/disk.h for FreeBSD 5.x.
+ (pupa_util_biosdisk_open): Added getting a device size for BSD.
+ (get_os_disk): Use code for __GNU__ for BSD too.
+ Change strchr() with strrchr() to fix working with 'sd' disk names.
+ [!__GNU__]: Add recognizing of 'ad' and 'wd' disk names.
+ (pupa_util_biosdisk_get_pupa_dev): Remove call make_device_name()
+ if file is not a block device.
+ * util/i386/pc/getroot.c (find_root_device): Do not check for a block
+ device.
+ * util/misc.c: Include config.h. Include malloc.h only if it's needed.
+ (pupa_memalign): Change memalign() with malloc() where unavailable.
+ * util/pupa-emu.c: Include malloc.h only if it's needed.
+ (main): Move pupa_util_biosdisk_init() above pupa_guess_root_device().
+
2004-03-14 Jeroen Dekkers <jeroen@dekkers.cx>
* Makefile.in: Update copyright.
diff -ruNp grub2/configure.ac grub2.test/configure.ac
--- grub2/configure.ac Fri Mar 19 23:55:24 2004
+++ grub2.test/configure.ac Sat Mar 20 01:40:52 2004
@@ -78,6 +78,9 @@ if test "x$default_CFLAGS" = xyes; then
fi
AC_SUBST(CFLAGS)
+AC_CHECK_HEADER(malloc.h)
+AC_CHECK_FUNC(memalign)
+
# Defined in aclocal.m4.
pupa_ASM_USCORE
pupa_CHECK_START_SYMBOL
diff -ruNp grub2/stamp-h grub2.test/stamp-h
--- grub2/stamp-h Thu Jan 1 03:00:00 1970
+++ grub2.test/stamp-h Sat Mar 20 01:41:16 2004
@@ -0,0 +1 @@
+timestamp
diff -ruNp grub2/util/i386/pc/biosdisk.c grub2.test/util/i386/pc/biosdisk.c
--- grub2/util/i386/pc/biosdisk.c Sun Mar 14 20:48:25 2004
+++ grub2.test/util/i386/pc/biosdisk.c Sat Mar 20 21:05:00 2004
@@ -37,6 +37,17 @@
#include <errno.h>
#include <limits.h>
+#if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
+# include <sys/ioctl.h> /* ioctl */
+# include <sys/disklabel.h>
+# if defined(__FreeBSD__)
+# include <sys/param.h>
+# if __FreeBSD_version >= 500040
+# include <sys/disk.h>
+# endif
+# endif
+#endif /* __FreeBSD__ || __NetBSD__ || __OpenBSD__ */
+
#ifdef __linux__
# include <sys/ioctl.h> /* ioctl */
# if !defined(__GLIBC__) || \
@@ -190,6 +201,48 @@ pupa_util_biosdisk_open (const char *nam
return PUPA_ERR_NONE;
}
+ fail:
+#elif defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
+ {
+ int fd;
+
+ fd = open (map[drive], O_RDONLY);
+ if (fd < 0)
+ return pupa_error (PUPA_ERR_BAD_DEVICE, "cannot open `%s'", map[drive]);
+
+ if (fstat (fd, &st) < 0)
+ {
+ close (fd);
+ goto fail;
+ }
+
+#if !defined(__FreeBSD__) || __FreeBSD_version < 500040
+ {
+ struct disklabel hdg;
+ if (ioctl (fd, DIOCGDINFO, &hdg))
+ goto fail;
+
+ disk->total_sectors = hdg.d_secperunit;
+ }
+#else
+ u_int secsize;
+ off_t mediasize;
+
+ if(ioctl(fd, DIOCGSECTORSIZE, &secsize) != 0)
+ secsize = 512;
+
+ if (ioctl(fd, DIOCGMEDIASIZE, &mediasize) != 0)
+ goto fail;
+
+ disk->total_sectors = mediasize / secsize;
+#endif
+
+ close (fd);
+ }
+
+ pupa_util_info ("the size of %s is %lu", name, disk->total_sectors);
+
+ return PUPA_ERR_NONE;
fail:
/* In GNU/Hurd, stat() will return the right size. */
@@ -659,11 +712,15 @@ get_os_disk (const char *os_dev)
return path;
-#elif defined(__GNU__)
+#elif defined(__GNU__) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
path = xstrdup (os_dev);
+#ifdef __GNU__
if (strncmp ("/dev/sd", path, 7) == 0 || strncmp ("/dev/hd", path, 7) == 0)
+#else
+ if (strncmp ("/dev/ad", path, 7) == 0 || strncmp ("/dev/wd", path, 7) == 0)
+#endif
{
- p = strchr (path, 's');
+ p = strrchr (path, 's');
if (p)
*p = '\0';
}
@@ -716,9 +773,6 @@ pupa_util_biosdisk_get_pupa_dev (const c
return 0;
}
- if (! S_ISBLK (st.st_mode))
- return make_device_name (drive, -1, -1);
-
#if defined(__linux__)
/* Linux counts partitions uniformly, whether a BSD partition or a DOS
partition, so mapping them to PUPA devices is not trivial.
@@ -806,8 +860,9 @@ pupa_util_biosdisk_get_pupa_dev (const c
return make_device_name (drive, dos_part, bsd_part);
}
-#elif defined(__GNU__)
+#elif defined(__GNU__) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
/* GNU uses "/dev/[hs]d[0-9]+(s[0-9]+[a-z]?)?". */
+ /* BSD uses "/dev/[aw]d[0-9]+(s[0-9]+[a-z]?)?". */
{
char *p;
int dos_part = -1;
diff -ruNp grub2/util/i386/pc/getroot.c grub2.test/util/i386/pc/getroot.c
--- grub2/util/i386/pc/getroot.c Sat Mar 13 16:59:25 2004
+++ grub2.test/util/i386/pc/getroot.c Sat Mar 20 21:03:29 2004
@@ -1,7 +1,7 @@
/* getroot.c - Get root device */
/*
* PUPA -- Preliminary Universal Programming Architecture for GRUB
- * Copyright (C) 1999,2000,2001,2002,2003 Free Software Foundation, Inc.
+ * Copyright (C) 1999,2000,2001,2002,2003,2004 Free Software Foundation, Inc.
*
* PUPA is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -178,7 +178,7 @@ find_root_device (const char *dir, dev_t
}
}
- if (S_ISBLK (st.st_mode) && st.st_rdev == dev)
+ if (st.st_rdev == dev)
{
/* Found! */
char *res;
diff -ruNp grub2/util/misc.c grub2.test/util/misc.c
--- grub2/util/misc.c Sat Mar 13 16:59:25 2004
+++ grub2.test/util/misc.c Sat Mar 20 02:23:44 2004
@@ -17,6 +17,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <config.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
@@ -24,7 +25,9 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/times.h>
+#ifdef HAVE_MALLOC_H
#include <malloc.h>
+#endif
#include <pupa/util/misc.h>
#include <pupa/mm.h>
@@ -194,7 +197,11 @@ pupa_memalign (pupa_size_t align, pupa_s
{
void *p;
+#ifdef HAVE_MEMALIGN
p = memalign (align, size);
+#else
+ p = malloc(size);
+#endif
if (! p)
pupa_util_error ("out of memory");
diff -ruNp grub2/util/pupa-emu.c grub2.test/util/pupa-emu.c
--- grub2/util/pupa-emu.c Sat Mar 13 16:59:25 2004
+++ grub2.test/util/pupa-emu.c Sat Mar 20 02:23:52 2004
@@ -18,7 +18,9 @@
*/
#include <stdlib.h>
+#ifdef HAVE_MALLOC_H
#include <malloc.h>
+#endif
#include <sys/stat.h>
#include <argp.h>
#include <string.h>
@@ -135,6 +137,8 @@ main (int argc, char *argv[])
argp_parse (&argp, argc, argv, 0, 0, &args);
+ /* XXX: This is a bit unportable. */
+ pupa_util_biosdisk_init (args.dev_map);
/* More sure there is a root device. */
if (! args.root_dev)
{
@@ -152,9 +156,6 @@ main (int argc, char *argv[])
pupa_env_set ("prefix", rootprefix);
- /* XXX: This is a bit unportable. */
- pupa_util_biosdisk_init (args.dev_map);
-
/* Initialize the default modules. */
pupa_fat_init ();
pupa_ext2_init ();
next prev parent reply other threads:[~2004-03-21 1:18 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-18 8:15 GRUB2: *BSD and more patch Sergey Matveychuk
2004-03-18 12:31 ` Yoshinori K. Okuji
2004-03-19 21:24 ` Sergey Matveychuk
2004-03-19 21:34 ` Johan Rydberg
2004-03-19 21:42 ` Marco Gerards
2004-03-19 21:56 ` Sergey Matveychuk
2004-03-19 22:22 ` Marco Gerards
2004-03-19 23:24 ` Sergey Matveychuk
2004-03-19 23:55 ` Marco Gerards
2004-03-20 0:45 ` Sergey Matveychuk
2004-03-20 10:29 ` Jeroen Dekkers
2004-03-20 18:30 ` Sergey Matveychuk
2004-03-20 19:43 ` Marco Gerards
2004-03-21 1:17 ` Sergey Matveychuk [this message]
2004-03-21 1:45 ` Marco Gerards
2004-03-21 2:18 ` Sergey Matveychuk
2004-03-21 3:30 ` Marco Gerards
2004-03-21 16:11 ` Yoshinori K. Okuji
2004-03-22 8:20 ` Sergey Matveychuk
2004-03-22 13:49 ` Yoshinori K. Okuji
2004-03-22 14:26 ` Jeroen Dekkers
2004-03-22 15:23 ` Yoshinori K. Okuji
2004-03-22 21:05 ` Sergey Matveychuk
2004-03-22 22:03 ` Sergey Matveychuk
2004-03-22 22:10 ` Sergey Matveychuk
2004-09-01 22:00 ` Marco Gerards
2004-09-02 10:50 ` Yoshinori K. Okuji
2004-09-05 9:26 ` Marco Gerards
2004-09-07 10:46 ` Yoshinori K. Okuji
2004-12-29 17:27 ` Marco Gerards
2005-01-11 13:32 ` Yoshinori K. Okuji
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=405CED3B.4090407@ciam.ru \
--to=sem@ciam.ru \
--cc=grub-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.