From mboxrd@z Thu Jan 1 00:00:00 1970 From: Masanao Yasui Date: Tue, 23 Mar 2004 08:15:45 +0000 Subject: [LARTC] Re: LARTC digest, Vol 1 #1647 - 2 msgs Message-Id: <405FF231.4080700@isp.co.jp> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org lartc-request@mailman.ds9a.nl wrote: > --__--__-- > > Message: 1 > From: "Morten Kramer" > To: > Date: Mon, 22 Mar 2004 21:00:14 +0100 > Subject: [LARTC] How to limit the Upload speed for an specific IP? > > This is a multi-part message in MIME format. > > ------=_NextPart_000_0255_01C41050.ABDECCF0 > Content-Type: text/plain; > charset="iso-8859-1" > Content-Transfer-Encoding: quoted-printable > > Hello, > > I want to limit the upload speed for the eth0 Interface for an specific > IP. > > I used the following script, but its only limits the DOWNLOAD speed.But > i want to limit both! > > DEV='eth0' > tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit > tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 > prio 5 bounded isolated > tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst > 192.168.0.2 flowid 1:1 > Hello, If you change "dst" into "src", you can control outgoing traffic rate..., I think. -- Masanao Yasui mailto:yasui@isp.co.jp _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/