From: Sebastian Hagen <sebastian_hagen@gmx.de>
To: netdev@oss.sgi.com
Subject: PROBLEM: tc-commands trigger oops on linux-2.4.25
Date: Fri, 26 Mar 2004 17:14:40 +0100 [thread overview]
Message-ID: <406456F0.5040009@gmx.de> (raw)
target: netdev@oss.sgi.com
subject: PROBLEM: tc-commands trigger oops on linux-2.4.25
[1.] tc-commands trigger oops on linux-2.4.25
[2.]
Using the tc-commands contained in the script in [6.] causes Linux
2.4.25 (and 2.4.24) to oops under certain
conditions. It can be reproduced on the system mentioned here reliably
by running the script immediately after
bootup.
After the oops, a number of processes get put into state D (ps-output)
indefinitely. This always applies to new
instances of ifconfig started without parameters. Some running daemons
(e.g. named, pppd) also go into D state after variable amounts of time.
"shutdown -r now" still puts the system into runlevel 6, but doesn't
actually trigger a reboot anymore.
Calling /sbin/reboot while in runlevel 6 does reboot it, though.
[3.]
networking, traffic control
[4.]
Linux version 2.4.25 (root@support-unit-001) (gcc version 3.3.2 20031022
(Red Hat Linux 3.3.2-1)) #3 Fri Mar 26 16:37:21 CET 2004
[5.]
ksymoops 2.4.5 on i686 2.4.25. Options used
-V (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.25/ (default)
-m /boot/System.map-2.4.25 (default)
Unable to handle kernel NULL pointer dereference at virtual address 00000000
00000000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<00000000>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: fffffffe ebx: 80000000 ecx: 00000001 edx: 00000001
esi: de7624c0 edi: c03c9520 ebp: dd1a9cd8 esp: dd1a9c5c
ds: 0018 es: 0018 ss: 0018
Process tc (pid: 904, stackpage=dd1a9000)
Stack: c02b4cac de7624c0 00000001 00000010 00010246 dd1a9e50 dd3be380
dd1a9c88
dddf34ac 00000007 dddf3600 00000000 00000001 c03c9520 de7624c0
00010001
00000000 00000008 def296d0 c03c9568 00000c68 00000c7c ddab82e4
000005dc
Call Trace: [<c02b4cac>] [<c02b01c2>] [<c02afe6f>] [<c02c590a>]
[<c02c51fd>]
[<c02c56a3>] [<c02a1563>] [<c02a29d9>] [<c012f116>] [<c01261e6>]
[<c01263ff>]
[<c0113a01>] [<c02a1eba>] [<c02a2ea8>] [<c0113860>] [<c01071cf>]
Code: Bad EIP value.
>>EIP; 00000000 Before first symbol
>>eax; fffffffe <END_OF_CODE+1f6f6e9f/????>
>>ebx; 80000000 Before first symbol
>>esi; de7624c0 <_end+1e334f08/2048bac8>
>>edi; c03c9520 <tbf_class_ops+0/40>
>>ebp; dd1a9cd8 <_end+1cd7c720/2048bac8>
>>esp; dd1a9c5c <_end+1cd7c6a4/2048bac8>
Trace; c02b4cac <tc_ctl_tfilter+dc/4f0>
Trace; c02b01c2 <rtnetlink_rcv_msg+162/22c>
Trace; c02afe6f <rtnetlink_rcv+af/1b0>
Trace; c02c590a <netlink_data_ready+5a/70>
Trace; c02c51fd <netlink_unicast+23d/2e0>
Trace; c02c56a3 <netlink_sendmsg+183/240>
Trace; c02a1563 <sock_sendmsg+73/b0>
Trace; c02a29d9 <sys_sendmsg+1b9/230>
Trace; c012f116 <lru_cache_add+66/70>
Trace; c01261e6 <do_anonymous_page+d6/e0>
Trace; c01263ff <handle_mm_fault+6f/f0>
Trace; c0113a01 <do_page_fault+1a1/52b>
Trace; c02a1eba <sys_socket+3a/60>
Trace; c02a2ea8 <sys_socketcall+218/240>
Trace; c0113860 <do_page_fault+0/52b>
Trace; c01071cf <system_call+33/38>
[6.]
#!/bin/sh
tc qdisc add dev ppp0 root handle 1:0 tbf rate 15kbps latency 50ms \
burst 1454
tc filter add dev ppp0 parent 1:1 prio 0 protocol ip handle 10 fw \
flowid 1:10
[7.]
[7.1.]
# ./scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux support-unit-001 2.4.25 #3 Fri Mar 26 16:37:21 CET 2004 i686
athlon i386 GNU/Linux
Gnu C 3.3.2
Gnu make 3.79.1
util-linux 2.11y
mount 2.11y
modutils 2.4.25
e2fsprogs 1.34
jfsutils 1.1.3
reiserfsprogs 3.6.8
quota-tools 3.06.
PPP 2.4.1
isdn4k-utils 3.3
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 2.0.17
Net-tools 1.60
Kbd 1.08
Sh-utils 5.0
Modules Loaded nfsd parport_pc lp parport sg scsi_mod
# tc -V
tc utility, iproute2-ss991023
[7.2.]
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2200+
stepping : 1
cpu MHz : 1800.545
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3591.37
[7.3.]
nfsd 79920 8 (autoclean)
parport_pc 26472 1 (autoclean)
lp 8708 0 (autoclean)
parport 33576 1 (autoclean) [parport_pc lp]
sg 30428 0 (autoclean) (unused)
scsi_mod 96544 1 (autoclean) [sg]
[7.4.]
[/proc/ioports]
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
d800-d81f : PCI device 10ec:8029
d800-d81f : ne2k-pci
dc00-dcff : PCI device 1039:0900
dc00-dcff : sis900
ff00-ff0f : PCI device 1039:5513
ff00-ff07 : ide0
ff08-ff0f : ide1
[/proc/iomem]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000e8000-000e9fff : reserved
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-0034d994 : Kernel code
0034d995-003d0363 : Kernel data
1fff0000-1fff7fff : ACPI Tables
1fff8000-1fffffff : ACPI Non-volatile Storage
cea00000-cebfffff : PCI Bus #01
ced00000-ceefffff : PCI Bus #01
cf7ec000-cf7ecfff : PCI device 1039:0900
cf7ec000-cf7ecfff : sis900
cf7ed000-cf7edfff : PCI device 1039:7001
cf7ed000-cf7edfff : usb-ohci
cf7ee000-cf7eefff : PCI device 1039:7001
cf7ee000-cf7eefff : usb-ohci
cf7ef000-cf7effff : PCI device 1039:7002
cf7ef000-cf7effff : ehci_hcd
cf800000-cfffffff : PCI device 5333:8811
d0000000-d7ffffff : PCI device 1039:0746
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffee0000-ffefffff : reserved
fffc0000-ffffffff : reserved
[7.5.]
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746 Host (rev 10)
Subsystem: Elitegroup Computer Systems: Unknown device 1808
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
Capabilities: [c0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if
00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=02, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: ced00000-ceefffff
Prefetchable memory behind bridge: cea00000-cebfffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
Bridge) (rev 25)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
(prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems: Unknown device 1808
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 4: I/O ports at ff00 [size=16]
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1808
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at cf7ed000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1808
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin B routed to IRQ 5
Region 0: Memory at cf7ee000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1808
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 10
Region 0: Memory at cf7ef000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet (rev 91)
Subsystem: Elitegroup Computer Systems: Unknown device 1808
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at cf7ec000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at cf7c0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at cf800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at cf7f0000 [disabled] [size=64K]
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [size=32]
[7.6.]
Attached devices: none
[7.7.]
The following is the output of "tc qdisc show" right after bootup; i.e.
a situation where running [6.] causes
an oops.
# tc qdisc show
qdisc pfifo_fast 0: dev eth0 [Unknown qdisc, optlen=20]
qdisc pfifo_fast 0: dev eth1 [Unknown qdisc, optlen=20]
qdisc pfifo_fast 0: dev ppp0 [Unknown qdisc, optlen=20]
[X.]
I hope I'm sending this to the correct address...
reply other threads:[~2004-03-26 16:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=406456F0.5040009@gmx.de \
--to=sebastian_hagen@gmx.de \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.