From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jiri Fojtasek Date: Wed, 31 Mar 2004 08:27:51 +0000 Subject: Re: [LARTC] New IMQ device implementation supporting device EOS Message-Id: <406A8107.4040000@hlohovec.net> List-Id: References: <40683536.4010104@hlohovec.net> In-Reply-To: <40683536.4010104@hlohovec.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Patrick McHardy wrote: > I haven't followed the discussion, but this is the way it is supposed to > work. As IMQ can queue packets for multiple devices it is not possible > to couple the dequeue event with the "real" output device's dequeue > event, simply because there may be multiple. Use non-work-conserving > qdiscs in this case and make sure you don't exceed the rate of the > individual output devices. > > Regards > Patrick Not posible ? With trick i did its posible ! And working very well :) Jiri Zkontrolovane antivirusom ClamAv Scanned by ClamAv - http://www.clamav.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/