From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lim Kee Chian Date: Thu, 01 Apr 2004 01:57:54 +0000 Subject: [LARTC] wireless sta MAC NAT Message-Id: <406C55CB.6040009@actinium.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi all, not sure this should be post here.... but i hope some one could help me. :> I'm newbie in the ebtables MAC address NAT and filtering stuff... i want to bridge a wireless client to a wired network, problem is AP would not accept frame not initiate from associated STA... so i guess i could solve it by natting mac with ebtables stuff.. question goes below.... 1. wat's the command need to do MAC NAT ? 2. can multiple wired devices utilise the wireless sta bridge after mac nat (wired port connected to a hub, switch ... etc)? i have the latest patch for bridge-nf kernel 2.4.20 + ebtables v2.0.6 hope u guys could help, thanks in advance regards, lim k.c. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/