From: Peter Fedorow <fedorowp@yahoo.com>
To: vojtech@suse.cz, linux-laptop@vger.kernel.org
Subject: PROBLEM: Laptop keyboard redetected each time computer screen wakes up from powerdown
Date: Sun, 04 Apr 2004 17:00:43 -0400 [thread overview]
Message-ID: <4070777B.1050609@yahoo.com> (raw)
[1.] One line summary of the problem:
Laptop keyboard re-detected each time computer screen wakes up from
power down.
[2.] Full description of the problem/report:
Each time a key is pressed to wake up the screen on an IBM ThinkPad 560X
laptop with the screen APM powered down, the followed message appears on
the foreground console: "input: AT Translated Set 2 keyboard on
isa0060/serio0". This is a problem because the message throws off the
console output in some applications.
[3.] Keywords (i.e., modules, networking, kernel):
laptop, input, APM, keyboard, IBM, Thinkpad, 560X
[4.] Kernel version (from /proc/version):
Linux version 2.6.3 (root@herojr) (gcc version 3.3.3 (Debian 20040321))
#15 Tue Mar 30 13:51:21 EST 2004
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt):
n/a
[6.] A small shell script or example program which triggers the problem
(if possible):
Enable APM in Linux. Wait for the screen to turn off. Press any key on
the keyboard to wake the computer up.
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here):
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux herojr 2.6.3 #15 Tue Mar 30 13:51:21 EST 2004 i586 GNU/Linux
Gnu C 3.3.3
Gnu make 3.80
binutils 2.14.90.0.7
util-linux 2.12
mount 2.12
module-init-tools 3.0-pre10
e2fsprogs 1.35
pcmcia-cs 3.2.5
PPP 2.4.2
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.0
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0.91
Modules Loaded snd_pcm_oss snd_mixer_oss snd_cs4236 snd_opl3_lib
snd_hwdep snd_cs4236_lib snd_mpu401_uart snd_rawmidi snd_cs4231_lib
snd_pcm snd_timer snd_page_alloc snd soundcore
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 8
model name : Mobile Pentium MMX
stepping : 1
cpu MHz : 231.857
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 mmx
bogomips : 457.72
[7.3.] Module information (from /proc/modules):
snd_pcm_oss 58340 0 - Live 0xc6940000
snd_mixer_oss 19392 1 snd_pcm_oss, Live 0xc6928000
snd_cs4236 17380 0 - Live 0xc6906000
snd_opl3_lib 10336 1 snd_cs4236, Live 0xc68b4000
snd_hwdep 9280 1 snd_opl3_lib, Live 0xc68c7000
snd_cs4236_lib 16608 1 snd_cs4236, Live 0xc68ee000
snd_mpu401_uart 7552 1 snd_cs4236, Live 0xc68bc000
snd_rawmidi 24640 1 snd_mpu401_uart, Live 0xc68f7000
snd_cs4231_lib 30240 2 snd_cs4236,snd_cs4236_lib, Live 0xc68dd000
snd_pcm 103076 3 snd_pcm_oss,snd_cs4236_lib,snd_cs4231_lib, Live 0xc690d000
snd_timer 26180 3 snd_opl3_lib,snd_cs4231_lib,snd_pcm, Live 0xc68e6000
snd_page_alloc 12292 2 snd_cs4231_lib,snd_pcm, Live 0xc68c2000
snd 55812 11
snd_pcm_oss,snd_mixer_oss,snd_cs4236,snd_opl3_lib,snd_hwdep,snd_cs4236_lib,snd_mpu401_uart,snd_rawmidi,snd_cs4231_lib,snd_pcm,snd_timer,
Live 0xc68ce000
soundcore 9408 1 snd, Live 0xc68b8000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem):
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0200-020f : CS4236+ SB
0388-0389 : OPL2/3 (left)
038a-038b : OPL2/3 (right)
03c0-03df : vga+
03f6-03f6 : ide0
04d0-04d1 : pnp 00:0a
0530-0533 : CS4231
0538-053f : CS4232 Control
0cf8-0cff : PCI conf1
15e0-15ef : pnp 00:0a
4000-40ff : PCI CardBus #01
4400-44ff : PCI CardBus #01
4800-48ff : PCI CardBus #05
4800-487f : 0000:05:00.0
4800-487f : xircom_cb
4c00-4cff : PCI CardBus #05
9000-901f : 0000:00:01.2
ef00-efaf : pnp 00:0a
fcf0-fcff : 0000:00:01.1
fcf0-fcf7 : ide0
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-05fcffff : System RAM
00100000-00269604 : Kernel code
00269605-00304eff : Kernel data
05fd0000-05fdefff : ACPI Tables
05fdf000-05fdffff : ACPI Non-volatile Storage
08000000-08ffffff : 0000:00:03.0
09000000-090fffff : 0000:00:03.0
09200000-093fffff : 0000:00:03.0
10000000-103fffff : PCI CardBus #01
10400000-107fffff : PCI CardBus #01
10800000-10bfffff : PCI CardBus #05
10800000-10803fff : 0000:05:00.0
10c00000-10ffffff : PCI CardBus #05
10c00000-10c007ff : 0000:05:00.0
10c00800-10c00fff : 0000:05:00.0
20821000-20821fff : 0000:00:02.1
20821000-20821fff : yenta_socket
20822000-20822fff : 0000:00:02.0
20822000-20822fff : yenta_socket
fffe0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
00:01.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at fcf0 [size=16]
00:01.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 48
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at 9000 [size=32]
00:01.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:02.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
Subsystem: IBM: Unknown device 0092
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 20822000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 10000000-103ff000 (prefetchable)
Memory window 1: 10400000-107ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:02.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
Subsystem: IBM: Unknown device 0092
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 20821000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 10800000-10bff000 (prefetchable)
Memory window 1: 10c00000-10fff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
00:03.0 VGA compatible controller: Neomagic Corporation NM2160
[MagicGraph 128XD] (prog-if 00 [VGA])
Subsystem: IBM MagicGraph 128XD
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (4000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 08000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at 09200000 (32-bit, non-prefetchable) [size=2M]
Region 2: Memory at 09000000 (32-bit, non-prefetchable) [size=1M]
05:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
Subsystem: Intel Corp. EtherExpress PRO/100 Mobile CardBus 32 Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 4800 [size=128]
Region 1: Memory at 10c00000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at 10c00800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at 10800000 [disabled] [size=16K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
n/a
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
/proc/apm:
1.16ac 1.2 0x03 0x01 0x00 0x01 100% -1 ?
reply other threads:[~2004-04-04 21:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4070777B.1050609@yahoo.com \
--to=fedorowp@yahoo.com \
--cc=linux-laptop@vger.kernel.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.