From: Joel Soete <soete.joel@tiscali.be>
To: Joel Soete <Soete.joel@tiscali.be>
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] 2.6.5-pa7 failled to build?
Date: Wed, 14 Apr 2004 21:02:37 +0000 [thread overview]
Message-ID: <407DA6ED.8020007@tiscali.be> (raw)
In-Reply-To: <40711E5500005BF8@ocpmta2.freegates.net>
Fortunately build and boot fine on 64bits n4k system (build with gcc-hppa64-3.0)
btw the 32bit one was build with gcc-3.3.3: is there known issue?
Tx,
Joel
Joel Soete wrote:
> Hi all,
>
> I just try to recompile 2.6.5-pa7 32bit on my b2k and it failled with following
> ld message:
> [snip]
> gcc -Wp,-MD,drivers/usb/host/.ohci-hcd.o.d -nostdinc -iwithprefix include
> -D__KERNEL__ -Iinclude -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes
> -Wno-trigraphs -fno-strict-aliasing -fno-common -pipe -mno-space-regs -mfast-indirect-calls
> -mdisable-fpregs -ffunction-sections -march=2.0 -mschedule=8000 -O2 -fomit-frame-pointer
> -DKBUILD_BASENAME=ohci_hcd -DKBUILD_MODNAME=ohci_hcd -c -o drivers/usb/host/ohci-hcd.o
> drivers/usb/host/ohci-hcd.c
> In file included from drivers/usb/host/ohci-hcd.c:135:
> drivers/usb/host/ohci-dbg.c: In function `ohci_dump_td':
> drivers/usb/host/ohci-dbg.c:282: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:284: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:309: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:310: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:320: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:320: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:324: warning: passing arg 1 of `__swab16p' discards
> qualifiers from pointer target type
> In file included from drivers/usb/host/ohci-hcd.c:135:
> drivers/usb/host/ohci-dbg.c: In function `ohci_dump_ed':
> drivers/usb/host/ohci-dbg.c:342: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:361: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:361: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> ld -r -o drivers/usb/host/built-in.o drivers/usb/host/ohci-hcd.o
> make -f scripts/Makefile.build obj=drivers/usb/image
> rm -f drivers/usb/image/built-in.o; ar rcs drivers/usb/image/built-in.o
> Inconsistency detected by ld.so: dynamic-link.h: 164: elf_get_dynamic_info:
> Assertion `info[9]->d_un.d_val == sizeof (Elf32_Rela)' failed!
> make[3]: *** [drivers/usb/image/built-in.o] Error 127
> make[2]: *** [drivers/usb/image] Error 2
> make[1]: *** [drivers/usb] Error 2
> make: *** [drivers] Error 2
>
> This b2k is running a sid debian install with mainly:
> # dpkg -l gcc binutils libc6
> Desired=Unknown/Install/Remove/Purge/Hold
> | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
> |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
> ||/ Name Version Description
> +++-==========================-==========================-====================================================================
> ii gcc 3.3.3-2 The GNU C compiler
> ii binutils 2.14.90.0.7-6 The GNU assembler,
> linker and binary utilities
> ii libc6 2.3.2.ds1-11 GNU C Library:
> Shared libraries and Timezone data
>
> And my config file is nearly the c3k one:
> # diff -Nau .config arch/parisc/configs/c3000_defconfig
> --- .config 2004-04-14 13:29:41.874241120 +0200
> +++ arch/parisc/configs/c3000_defconfig 2004-04-08 12:38:54.000000000 +0200
> @@ -70,14 +70,14 @@
> CONFIG_IOSAPIC=y
> CONFIG_IOMMU_SBA=y
> CONFIG_SUPERIO=y
> -CONFIG_CHASSIS_LCD_LED=y
> +# CONFIG_CHASSIS_LCD_LED is not set
> # CONFIG_PDC_CHASSIS is not set
>
> #
> # PCMCIA/CardBus support
> #
> CONFIG_PCMCIA=m
> -# CONFIG_PCMCIA_DEBUG is not set
> +CONFIG_PCMCIA_DEBUG=y
> CONFIG_YENTA=m
> CONFIG_CARDBUS=y
> # CONFIG_I82092 is not set
> @@ -520,7 +520,8 @@
> #
> # Ethernet (10000 Mbit)
> #
> -# CONFIG_IXGB is not set
> +CONFIG_IXGB=y
> +CONFIG_IXGB_NAPI=y
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> CONFIG_PPP=m
>
> Any idea?
>
> Joel
>
> ----------------------------------------------------------------------------------------
> Tiscali ADSL: 35 €/mois, la meilleure offre du marché!
> http://reg.tiscali.be/default.asp?lg=fr
>
>
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
>
prev parent reply other threads:[~2004-04-14 21:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-14 11:58 [parisc-linux] 2.6.5-pa7 failled to build? Joel Soete
2004-04-14 21:02 ` Joel Soete [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=407DA6ED.8020007@tiscali.be \
--to=soete.joel@tiscali.be \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.