From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from spoolo4.tiscali.be (spoolo4.tiscali.be [62.235.13.170]) by dsl2.external.hp.com (Postfix) with ESMTP id 5ADC64898 for ; Sat, 17 Apr 2004 12:10:43 -0600 (MDT) Message-ID: <4081731B.7070006@tiscali.be> Date: Sat, 17 Apr 2004 18:10:35 +0000 From: Joel Soete MIME-Version: 1.0 To: Andy Walker Subject: Re: [parisc-linux] 2.6.5-rc2-pa2 boot panic on c110 :( References: <407DA495.1090009@tiscali.be> <40711E5500006381@ocpmta2.freegates.net> <26419.193.161.152.244.1082114391.squirrel@www.puszczka.com> In-Reply-To: <26419.193.161.152.244.1082114391.squirrel@www.puszczka.com> Content-Type: text/plain; charset=us-ascii; format=flowed Cc: parisc-linux@lists.parisc-linux.org List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello Andy, Sorry for delay but I was a bit busy by a production server. Andy Walker wrote: >>>That said, thanks to viewcvs, cvs and some tbz I recover from my systems, >> >>I >reach to rebuild on my b2k at the office: >> >>>2.6.3-pa2 (runing simultaneoulsy 2 find on different linux tree, a >>>tar of one of those tree) survive :) >>>2.6.4-rc1-pa3 same test: survive (so no pb with ccio-dma changes) :) >>>but 2.6.4-rc4-pa6 died with same messages. >> >>Sorry a typo: read 2.6.4-rc3-pa6 in place of rc4 :( >> >>Joel >> >> > > > Joel, > > 2.6.6-rc1-pa0 shows the same behaviour, Thanks. but not a surprise regarding previous test. > although it does seem to make it > through the Gentoo boot process most times. I would not be surprise if it occures during some fsck. Do you also use ext3 on your Gentoo? btw Gentoo always install pkg by a local rebuild from src (that's a long time that I visit the site)? > Typically, 'ls ' in > bash in a largeish directory will do the trick. The bash process ends up > in disk-wait, the WARN_ON gets logged. I can switch consoles and log in > but just about anything that goes to disk ends up in disk-wait too. > I will try this also. > I've compiled 2.6.3-pa2 in the hope of getting the C180 up and stable. This seems to be the last one enough stable for me and my c110: I just updated my distro (that used a lot tar iirc) and all works fine with this kernel. > Can't boot it until this evening because the machine's at home and > AUTOBOOT is OFF. > No pb. Thanks for your feedback ;) Joel