Re: HighPoint Rocket 1540 hang driver load

[Lars Gaarden <lar-gaar@online.no>]

Måns Rullgård wrote:
> Nick Maynard <nick.maynard@alumni.doc.ic.ac.uk> writes:
> 
>>The Rocket 1540 and the RocketRAID 1540 are different cards.  I am sure the
>>RocketRAID 1540 is a lovely card.  The Rocket 1540 is not, however.
> 
> Apparently that is the case.  What is the exact PCI id and revision of
> the chip used on the Rocket1540?  My Rocketraid 1540 reports as
> 1103:0008 (rev 07).
> 

No chance distinguishing them based on PCI id/rev, it seems.
Here is the lspci -vvn for my Rocket1540.

00:08.0 Class 0104: 1103:0008 (rev 07)
         Subsystem: 1103:0001
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (2000ns min, 2000ns max), cache line size 08
         Interrupt: pin A routed to IRQ 19
         Region 0: I/O ports at d000 [size=8]
         Region 1: I/O ports at cc00 [size=4]
         Region 2: I/O ports at c800 [size=8]
         Region 3: I/O ports at c400 [size=4]
         Region 4: I/O ports at c000 [size=256]
         Expansion ROM at dffa0000 [disabled] [size=128K]
         Capabilities: [60] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.1 Class 0104: 1103:0008 (rev 07)
         Subsystem: 1103:0001
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (2000ns min, 2000ns max), cache line size 08
         Interrupt: pin A routed to IRQ 19
         Region 0: I/O ports at e800 [size=8]
         Region 1: I/O ports at e400 [size=4]
         Region 2: I/O ports at e000 [size=8]
         Region 3: I/O ports at dc00 [size=4]
         Region 4: I/O ports at d800 [size=256]
         Capabilities: [60] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html