From: James Lamanna <jamesl@appliedminds.com>
To: linux-kernel@vger.kernel.org
Cc: adaplas@pol.net
Subject: Getting i815 Framebuffer working?!
Date: Thu, 06 May 2004 16:57:22 -0700 [thread overview]
Message-ID: <409AD0E2.4040705@appliedminds.com> (raw)
Using stock 2.6.5, I'm trying to get the Intel i810/5 framebuffer driver
to work. So far I have had no success.
Any help would be appreciated, system data follows.
Please CC me for I am not subscribed.
-- James Lamanna
I'm using the following lilo.conf line:
append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,\
hsync2:55,vsync1:50,vsync2:85,accel,mtrr"
Relevant Statements from dmesg:
agpgart: Detected an Intel i815 Chipset.
agpgart: Maximum main memory to use for agp memory: 438M
agpgart: AGP aperture is 64M @ 0xe0000000
i810fb: probe of 0000:00:02.0 failed with error -22
^^^^ Not promising... :)
NTFS driver 2.1.6 [Flags: R/O].
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
[drm] Initialized i810 1.4.0 20030605 on minor 0
[drm] Initialized i830 1.3.2 20021108 on minor 1
Relevant lspci output:
0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset
Graphics Controller] (rev 04) (prog-if 00 [VGA])
Subsystem: Intel Corp. 82815 CGC [Chipset Graphics Controller]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, prefetchable)
Region 1: Memory at e4100000 (32-bit, non-prefetchable)
[size=512K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Relevant parts of .config:
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
next reply other threads:[~2004-05-06 23:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-06 23:57 James Lamanna [this message]
2004-05-19 0:30 ` Getting i815 Framebuffer working?! Antonino A. Daplas
-- strict thread matches above, loose matches on Subject: below --
2004-05-07 0:36 James Lamanna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=409AD0E2.4040705@appliedminds.com \
--to=jamesl@appliedminds.com \
--cc=adaplas@pol.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.