From: reader <benthijssen@namar.xs4all.nl>
To: lartc@vger.kernel.org
Subject: [LARTC] prerouting does not effect filtering
Date: Sun, 09 May 2004 17:55:05 +0000 [thread overview]
Message-ID: <409E7079.3010508@namar.xs4all.nl> (raw)
I try to shape traffic using HTB and mark packets within iptables using
PREROUTING. But the filterrules seems to ignore the marks set with
PREROUTING
Only POSTROUTING marks are accepted.
First my configuration
I have a router connected to the internet via ADSL over interface ppp0.
eth0 is a tunnel to ppp0 and eth1 serves the LAN.
LAN is 192.168.57.0/24 on 10Mbit
ppp0 is 80.126.16.44 on 320Kbit upstream and 2048Kbit downstream
These are the kernel/programs involved:
Kernel 2.4.20 (Suse 8.2)
iproute version 2.4.7
iptables version 1.2.7a
Underneath the HTB script and a snapshot of the iptables script. The HTB
script is executed on the beginning of the iptables script.
># Configure HTB qdisc
>/usr/sbin/tc qdisc add dev eth1 root handle 1:0 htb default 30
>/usr/sbin/tc class add dev eth1 parent 1: classid 1:1 htb rate 1960kbit burst 15k
>/usr/sbin/tc class add dev eth1 parent 1:1 classid 1:10 htb rate 152kbit ceil 152kbit burst 2k prio 1
>/usr/sbin/tc class add dev eth1 parent 1:1 classid 1:20 htb rate 950kbit ceil 1808kbit burst 15k prio 5
>/usr/sbin/tc class add dev eth1 parent 1:1 classid 1:30 htb rate 646kbit ceil 900kbit burst 15k prio 10
>/usr/sbin/tc class add dev eth1 parent 1:1 classid 1:40 htb rate 133kbit ceil 152kbit burst 15k prio 15
>/usr/sbin/tc qdisc add dev eth1 parent 1:10 handle 10: sfq perturb 10
>/usr/sbin/tc qdisc add dev eth1 parent 1:20 handle 20: sfq perturb 10
>/usr/sbin/tc qdisc add dev eth1 parent 1:30 handle 30: sfq perturb 10
>/usr/sbin/tc qdisc add dev eth1 parent 1:40 handle 40: sfq perturb 10
># Filter rules
>/usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle 1 fw flowid 1:10
>/usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 3 handle 2 fw flowid 1:10
>/usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle 4 fw flowid 1:20
>/usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 3 handle 5 fw flowid 1:20
>/usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle 8 fw flowid 1:30
>/usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle 10 fw flowid 1:40
>
># Snapshot off iptables script. scp and ssh as an exapmle
># Standard policy is -j DROP
>
>/usr/sbin/iptables -t mangle -A PREROUTING -p tcp -m tcp -i eth1 --dport 22 \
> -m tos --tos Maximize-Throughput -j MARK --set-mark 10
>/usr/sbin/iptables -t mangle -A PREROUTING -p tcp -m tcp -i eth1 --dport 22 \
> -m tos --tos Minimize-Delay -j MARK --set-mark 2
>
>/usr/sbin/iptables -A FORWARD -p tcp -i eth1 -o ppp0 -s 192.168.57.0/24 \
> -d 0/0 --dport 22 -j ACCEPT
>/usr/sbin/iptables -A POSTROUTING -t nat -p tcp -o ppp0 -s 192.168.57.0/24 \
> -d 0/0 --dport 22 -j SNAT --to 80.126.16.44
>
And the packages seem to be marked as intented:
515 31080 MARK tcp -- eth1 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 TOS match 0x10 MARK set 0x2
But tc -s class show dev eth1
says only htb 1:30 is used.
I get the feeling it is something with the POSTROUTING rule but can not
work out what is wrong.
Thanks
Ben Thijssen.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2004-05-09 17:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-09 17:55 reader [this message]
2004-05-09 22:12 ` [LARTC] prerouting does not effect filtering Andy Furniss
2004-05-10 1:40 ` Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=409E7079.3010508@namar.xs4all.nl \
--to=benthijssen@namar.xs4all.nl \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.