From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Furniss Date: Sun, 09 May 2004 22:12:55 +0000 Subject: Re: [LARTC] prerouting does not effect filtering Message-Id: <409EACE7.3040907@dsl.pipex.com> List-Id: References: <409E7079.3010508@namar.xs4all.nl> In-Reply-To: <409E7079.3010508@namar.xs4all.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org reader wrote: > I try to shape traffic using HTB and mark packets within iptables using > PREROUTING. But the filterrules seems to ignore the marks set with > PREROUTING > Only POSTROUTING marks are accepted. > > First my configuration > > I have a router connected to the internet via ADSL over interface ppp0. > eth0 is a tunnel to ppp0 and eth1 serves the LAN. > LAN is 192.168.57.0/24 on 10Mbit > ppp0 is 80.126.16.44 on 320Kbit upstream and 2048Kbit downstream > > > These are the kernel/programs involved: > > Kernel 2.4.20 (Suse 8.2) > iproute version 2.4.7 > iptables version 1.2.7a > > Underneath the HTB script and a snapshot of the iptables script. The HTB > script is executed on the beginning of the iptables script. > >> # Configure HTB qdisc >> /usr/sbin/tc qdisc add dev eth1 root handle 1:0 htb default 30 >> /usr/sbin/tc class add dev eth1 parent 1: classid 1:1 htb rate >> 1960kbit burst 15k >> /usr/sbin/tc class add dev eth1 parent 1:1 classid 1:10 htb rate >> 152kbit ceil 152kbit burst 2k prio 1 >> /usr/sbin/tc class add dev eth1 parent 1:1 classid 1:20 htb rate >> 950kbit ceil 1808kbit burst 15k prio 5 >> /usr/sbin/tc class add dev eth1 parent 1:1 classid 1:30 htb rate >> 646kbit ceil 900kbit burst 15k prio 10 >> /usr/sbin/tc class add dev eth1 parent 1:1 classid 1:40 htb rate >> 133kbit ceil 152kbit burst 15k prio 15 >> /usr/sbin/tc qdisc add dev eth1 parent 1:10 handle 10: sfq perturb 10 >> /usr/sbin/tc qdisc add dev eth1 parent 1:20 handle 20: sfq perturb 10 >> /usr/sbin/tc qdisc add dev eth1 parent 1:30 handle 30: sfq perturb 10 >> /usr/sbin/tc qdisc add dev eth1 parent 1:40 handle 40: sfq perturb 10 >> # Filter rules >> /usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle >> 1 fw flowid 1:10 >> /usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 3 handle >> 2 fw flowid 1:10 >> /usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle >> 4 fw flowid 1:20 >> /usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 3 handle >> 5 fw flowid 1:20 >> /usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle >> 8 fw flowid 1:30 >> /usr/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle >> 10 fw flowid 1:40 >> > >> # Snapshot off iptables script. scp and ssh as an exapmle >> # Standard policy is -j DROP >> >> /usr/sbin/iptables -t mangle -A PREROUTING -p tcp -m tcp -i eth1 >> --dport 22 \ >> -m tos --tos Maximize-Throughput -j MARK --set-mark 10 >> /usr/sbin/iptables -t mangle -A PREROUTING -p tcp -m tcp -i eth1 ^^ You are only marking packets inbound on eth1, but shaping outbound. Andy. >> --dport 22 \ >> -m tos --tos Minimize-Delay -j MARK --set-mark 2 >> >> /usr/sbin/iptables -A FORWARD -p tcp -i eth1 -o ppp0 -s 192.168.57.0/24 \ >> -d 0/0 --dport 22 -j ACCEPT >> /usr/sbin/iptables -A POSTROUTING -t nat -p tcp -o ppp0 -s >> 192.168.57.0/24 \ >> -d 0/0 --dport 22 -j SNAT --to 80.126.16.44 > > > And the packages seem to be marked as intented: > > 515 31080 MARK tcp -- eth1 * 0.0.0.0/0 > 0.0.0.0/0 tcp dpt:22 TOS match 0x10 MARK set 0x2 > > > But tc -s class show dev eth1 says only htb 1:30 is used. > > I get the feeling it is something with the POSTROUTING rule but can not > work out what is wrong. > > Thanks > > > Ben Thijssen. > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/