From mboxrd@z Thu Jan 1 00:00:00 1970 From: Francisco Moraes Subject: Emu10k1x status Date: Mon, 10 May 2004 19:49:19 -0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <40A014FF.90107@netzero.net> References: <403154C2.3020701@netzero.net> <403354B9.8000305@netzero.net> <40340A6B.7080507@netzero.net> <403FAA2E.1040600@netzero.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <403FAA2E.1040600@netzero.net> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi everybody, Just wanted to share the status of the Emu10k1x driver (Dell SB Live! Value). I've finally got PCM playback working at 48000khz and a 32Kb buffer. I haven't tried too much more than this which is hard because of lack of specs for the card. I am doing some clean up and I hope to have a first pass of the drive submitted soon. By the way, I've also added support for the joystick port on the card. This could have been done by simply adding the PCI ID into the drivers/char/joystick/emu10k1-gp.c driver in the linux kernel. Any suggestions or preferences of whether this should be changed in the kernel driver or in the alsa driver itself like I have at the moment? Francisco ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3