From mboxrd@z Thu Jan 1 00:00:00 1970 From: Muhammad Reza Date: Thu, 13 May 2004 04:38:08 +0000 Subject: Re: [LARTC] Multipath Connection problem on RH-8.0 Message-Id: <40A2FBB0.5080504@mra.co.id> List-Id: References: <40A1D154.5080508@mra.co.id> In-Reply-To: <40A1D154.5080508@mra.co.id> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Julian Anastasov wrote: > Hello, > >On Wed, 12 May 2004, Muhammad Reza wrote: > > > >>default proto static >> nexthop via 172.16.0.1 dev eth0 weight 256 dead onlink pervasive >> nexthop via 192.168.0.1 dev eth1 weight 1 >>I search the list about this error, and found that i shall use the >>upgrade version of iproute2, and i compile that too. >>but with same config, and new iproute2 i can't connect to internet now. >>please be advice, what wrong with my config (attach), and what version >>of linux should work ? >> >> > > Can you check the example 'ip route get' commands and >"2.4 Keeping them alive" from nano.txt. Make sure after upgrading >iproute2 that your nexthops are not dead. Also, list you rules >and routes and make sure they are valid, I see your commands but >I do not know which of them are accepted from the kernel. > >Regards > >-- >Julian Anastasov > > > now i downgrade to rh-7.2 (2.4.20-w/ julian patch)and iproute version iproute2-ss010824. but still cant do multipath routing. this is my trace with ip route get; [root@firewall root]# ip route get 202.138.253.17 202.138.253.17 via 172.16.0.1 dev eth0 src 172.16.0.232 cache mtu 1500 advmss 1460 [root@firewall root]# ip route get 202.138.253.17 from 192.168.0.2 202.138.253.17 from 192.168.0.2 via 192.168.0.1 dev eth1 cache mtu 1500 advmss 1460 [root@firewall root]# ip route get 202.138.253.17 from 172.16.0.232 202.138.253.17 from 172.16.0.232 via 172.16.0.1 dev eth0 cache mtu 1500 advmss 1460 [root@firewall root]# ip route list table main 192.168.0.0/30 dev eth1 proto kernel scope link src 192.168.0.2 172.16.0.0/24 dev eth0 scope link 10.10.10.0/24 dev eth2 scope link 127.0.0.0/8 dev lo scope link [root@firewall root]# ip route list table MRA default via 172.16.0.1 dev eth0 proto static src 172.16.0.232 prohibit default proto static metric 1 [root@firewall root]# ip route list table DEF default proto static nexthop via 172.16.0.1 dev eth0 weight 1 nexthop via 192.168.0.1 dev eth1 weight 1 with this configuration i still couldn connect to internet how to debug and solve this problem... ? please be advice.. regards reza _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/