Re: Crashes possibly related to XFS fs.

[Marco Adurno <marco.adurno@dotnetitalia.it>]

I noticed that you have a Sil3112SATA controller and that you use the 
"ide version" of the driver. Have you tried to don't compile the libata 
version of the driver?


Marco Adurno

David Martinez Moreno - RedIRIS wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> 	Hello. Since 2.6-preX series we are using XFS filesystem in the Spanish
>  Debian mirror. The machine is under load most of the time, and I think that
>  our periodic crashes (most of them occur only after some hours of operation,
>  some in a couple of days) could be related to the main data filesystem.
> 
> 	For example, today I rebooted the server. All is working, well, with FTP and
>  HTTP concurrent access, and then I run the periodic script to sync up with
>  official Debian mirrors. It is a recursive rsync over the whole tree, over 96
>  GB of size. Now it's running 2.6.6 vanilla. The crash is:
> 
> May 12 15:12:00 ulises kernel: b44: eth0: Link is down.
> May 12 15:12:06 ulises kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
> May 12 15:12:06 ulises kernel: b44: eth0: Flow control is on for TX and on for RX.
> May 12 15:14:18 ulises kernel: b44: eth0: Link is down.
> May 12 15:14:21 ulises kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
> May 12 15:14:21 ulises kernel: b44: eth0: Flow control is on for TX and on for RX.
> May 12 15:18:01 ulises kernel: b44: eth0: Link is down.
> May 12 15:18:04 ulises kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
> May 12 15:18:04 ulises kernel: b44: eth0: Flow control is on for TX and on for RX.
> May 12 15:18:42 ulises kernel: b44: eth0: Link is down.
> May 12 15:18:45 ulises kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
> May 12 15:18:45 ulises kernel: b44: eth0: Flow control is on for TX and on for RX.
> May 12 15:19:17 ulises kernel: b44: eth0: Link is down.
> May 12 15:19:19 ulises kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
> May 12 15:19:19 ulises kernel: b44: eth0: Flow control is on for TX and on for RX.
> May 12 16:32:48 ulises kernel:  printing eip:
> May 12 16:32:49 ulises kernel: c0216e8f
> May 12 15:21:16 ulises kernel: Oops: 0000 [#1]
> May 12 15:21:16 ulises kernel: CPU:    0
> May 12 15:21:17 ulises kernel: EIP:    0060:[xfs_count_page_state+49/138]    Not tainted
> May 12 15:21:17 ulises kernel: EFLAGS: 00010206   (2.6.6)
> May 12 15:21:17 ulises kernel: EIP is at xfs_count_page_state+0x31/0x8a
> May 12 15:21:17 ulises kernel: eax: 736ef8dd   ebx: c15f1ce8   ecx: ce048460   edx: e6de4d26
> May 12 15:21:18 ulises kernel: esi: c15f1ce4   edi: c15f1ce0   ebp: c15f1ddc   esp: c15f1cc0
> May 12 15:21:18 ulises kernel: ds: 007b   es: 007b   ss: 0068
> May 12 15:21:18 ulises kernel: Process kswapd0 (pid: 9, threadinfo=c15f1000 task=c15c4630)
> May 12 15:21:18 ulises kernel: Stack: c10444e0 d921609c 00000001 c0217007 c10444e0 c15f1ce0 c15f1ce4 c15f1ce8
> May 12 15:21:18 ulises kernel:        00000000 00000000 00000001 00000000 000000d0 c01408b2 c10444e0 000000d0
> May 12 15:21:18 ulises kernel:        d9216134 c10444e0 c012eee2 c10444e0 000000d0 d2f46b00 00000080 00000008
> May 12 15:21:18 ulises kernel: Call Trace:
> May 12 15:21:18 ulises kernel:  [linvfs_release_page+52/156] linvfs_release_page+0x34/0x9c
> May 12 15:21:18 ulises kernel:  [try_to_release_page+81/107] try_to_release_page+0x51/0x6b
> May 12 15:21:18 ulises kernel:  [shrink_list+797/1005] shrink_list+0x31d/0x3ed
> May 12 15:21:18 ulises kernel:  [vn_purge+264/278] vn_purge+0x108/0x116
> May 12 15:21:18 ulises kernel:  [schedule+749/1272] schedule+0x2ed/0x4f8
> May 12 15:21:18 ulises kernel:  [shrink_cache+334/787] shrink_cache+0x14e/0x313
> May 12 15:21:18 ulises kernel:  [blk_congestion_wait+133/142] blk_congestion_wait+0x85/0x8e
> May 12 15:21:18 ulises kernel:  [shrink_slab+132/365] shrink_slab+0x84/0x16d
> May 12 15:21:18 ulises kernel:  [balance_pgdat+466/603] balance_pgdat+0x1d2/0x25b
> May 12 15:21:18 ulises kernel:  [kswapd+274/290] kswapd+0x112/0x122
> May 12 15:21:18 ulises kernel:  [autoremove_wake_function+0/79] autoremove_wake_function+0x0/0x4f
> May 12 15:21:18 ulises kernel:  [autoremove_wake_function+0/79] autoremove_wake_function+0x0/0x4f
> May 12 15:21:18 ulises kernel:  [kswapd+0/290] kswapd+0x0/0x122
> May 12 15:21:18 ulises kernel:  [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
> May 12 15:21:18 ulises kernel:
> May 12 15:21:18 ulises kernel: Code: 8b 02 a8 01 74 17 8b 02 a8 10 75 11 c7 06 01 00 00 00 8b 52
> 
> 	After that, the XFS fs is unmountable.
> 
> 	The only remarkable thing is that the fs is on top of a RAID0
> across two 180 GB IDE disks.
> 
> 	I checked the filesystem with xfs_check 2.6.5 without errors.
> 
> 	What I fear is that the kernel dies under XFS pressure. But I don't
> have relevant info against that, mainly because the FTP/HTTP mirror
> is the only source of pressure (i.e. concurrent accesses) in the machine.
> 
> 	The data access pattern is ~200 users downloading big (~650 MB)
> files (in fact, almost all the users try to download the same 3
> main images).
> 
> 	Other data:
> 
> Intel P4 2.5 GHz
> 512 MB RAM
> 
> 	mount:
> 
> ulises:~# mount
> /dev/hda5 on / type ext3 (rw,errors=remount-ro)
> proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> devpts on /dev/pts type devpts (rw,gid=5,mode=620)
> tmpfs on /dev/shm type tmpfs (rw)
> usbfs on /proc/bus/usb type usbfs (rw)
> /dev/hda1 on /boot type ext3 (rw)
> /dev/hda6 on /var type ext3 (rw)
> /dev/hda8 on /home type ext3 (rw)
> /dev/md0 on /mirror type xfs (rw)
> 
> 	raidtab:
> 
> ulises:~# cat /etc/raidtab
> raiddev /dev/md0
> raid-level      0
> nr-raid-disks   2
>         persistent-superblock   1
>         chunk-size      16
>         device          /dev/hde1
>         raid-disk       0
>         device          /dev/hdg1
>         raid-disk       1
> 
> 	Interesting excerpts from dmesg:
> 
> [...]
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH4: IDE controller at PCI slot 0000:00:1f.1
> ICH4: chipset revision 2
> ICH4: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
> hda: ST320423A, ATA DISK drive
> hdb: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
> Using anticipatory io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> SiI3112 Serial ATA: IDE controller at PCI slot 0000:02:0e.0
> SiI3112 Serial ATA: chipset revision 2
> SiI3112 Serial ATA: 100% native mode on irq 18
>     ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
>     ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
> hde: ST3120026AS, ATA DISK drive
> ide2 at 0xe0820080-0xe0820087,0xe082008a on irq 18
> hdg: ST3120026AS, ATA DISK drive
> ide3 at 0xe08200c0-0xe08200c7,0xe08200ca on irq 18
> hda: max request size: 128KiB
> hda: 40011300 sectors (20485 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
>  hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
> hde: max request size: 64KiB
> hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63
>  hde: hde1
> hdg: max request size: 64KiB
> hdg: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63
>  hdg: hdg1
> hdb: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
> [...]
> 
> 	lspci:
> 
> 0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
> 0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 02)
> 0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 02)
> 0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 02)
> 0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 02)
> 0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 02)
> 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 82)
> 0000:00:1f.0 ISA bridge: Intel Corp. 82801DB (ICH4) LPC Bridge (rev 02)
> 0000:00:1f.1 IDE interface: Intel Corp. 82801DB (ICH4) Ultra ATA 100 Storage Controller (rev 02)
> 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 02)
> 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 02)
> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15)
> 0000:02:00.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
> 0000:02:0e.0 RAID bus controller: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller (rev 02)
> 
> 	I attach my kernel config.
> 
> 	Am I overlooking anything? The box ran a complete memtest86 test
> last month without errors...
> 
> 	Many thanks in advance,
> 
> 
> 		Ender.
> - -- 
> To the infinity, and beyond!
> 		-- Buzz Lightyear (Toy Story).
> - --
> Servicios de red - Network services
> RedIRIS - Spanish Academic Network for Research and Development
> Red.es - Madrid (Spain)
> Tlf (+34) 91.212.76.25
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.4 (GNU/Linux)
> 
> iD8DBQFAozznWs/EhA1iABsRAon5AJ9bDC3A1Ke03CJSBBEWazBWKtXCNgCfXzJF
> N3k7sgLDHyFRp1iPzo5OoNw=
> =GwQL
> -----END PGP SIGNATURE-----
> 
> 
> ------------------------------------------------------------------------
> 
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_STANDALONE=y
> CONFIG_BROKEN_ON_SMP=y
> 
> #
> # General setup
> #
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> # CONFIG_POSIX_MQUEUE is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> CONFIG_LOG_BUF_SHIFT=17
> # CONFIG_HOTPLUG is not set
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> 
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
> 
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_X86_GENERIC is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> # CONFIG_SMP is not set
> # CONFIG_PREEMPT is not set
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_TSC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> CONFIG_X86_MCE_P4THERMAL=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> 
> #
> # Firmware Drivers
> #
> CONFIG_EDD=y
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_EFI is not set
> # CONFIG_REGPARM is not set
> 
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> # CONFIG_SOFTWARE_SUSPEND is not set
> # CONFIG_PM_DISK is not set
> 
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_INTERPRETER=y
> # CONFIG_ACPI_SLEEP is not set
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> # CONFIG_X86_PM_TIMER is not set
> 
> #
> # APM (Advanced Power Management) BIOS Support
> #
> # CONFIG_APM is not set
> 
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
> 
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> # CONFIG_PCI_USE_VECTOR is not set
> # CONFIG_PCI_LEGACY_PROC is not set
> CONFIG_PCI_NAMES=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> 
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_AOUT is not set
> # CONFIG_BINFMT_MISC is not set
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> # CONFIG_DEBUG_DRIVER is not set
> 
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> 
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> # CONFIG_PARPORT_PC is not set
> # CONFIG_PARPORT_OTHER is not set
> # CONFIG_PARPORT_1284 is not set
> 
> #
> # Plug and Play support
> #
> 
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_CARMEL is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_LBD is not set
> 
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
> 
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
> CONFIG_IDE_TASKFILE_IO=y
> 
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> CONFIG_BLK_DEV_SIIMAGE=y
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set
> 
> #
> # SCSI device support
> #
> CONFIG_SCSI=y
> # CONFIG_SCSI_PROC_FS is not set
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> # CONFIG_BLK_DEV_SD is not set
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> # CONFIG_CHR_DEV_SG is not set
> 
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_REPORT_LUNS is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> 
> #
> # SCSI Transport Attributes
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> 
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_MEGARAID is not set
> CONFIG_SCSI_SATA=y
> # CONFIG_SCSI_SATA_SVW is not set
> # CONFIG_SCSI_ATA_PIIX is not set
> # CONFIG_SCSI_SATA_PROMISE is not set
> CONFIG_SCSI_SATA_SIL=y
> # CONFIG_SCSI_SATA_SIS is not set
> # CONFIG_SCSI_SATA_VIA is not set
> # CONFIG_SCSI_SATA_VITESSE is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX=y
> # CONFIG_SCSI_QLA21XX is not set
> # CONFIG_SCSI_QLA22XX is not set
> # CONFIG_SCSI_QLA2300 is not set
> # CONFIG_SCSI_QLA2322 is not set
> # CONFIG_SCSI_QLA6312 is not set
> # CONFIG_SCSI_QLA6322 is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
> 
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> # CONFIG_MD_LINEAR is not set
> CONFIG_MD_RAID0=y
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID5 is not set
> # CONFIG_MD_RAID6 is not set
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_BLK_DEV_DM is not set
> 
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> 
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
> 
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
> 
> #
> # Networking support
> #
> CONFIG_NET=y
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> # CONFIG_NETLINK_DEV is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> CONFIG_NET_IPGRE=y
> # CONFIG_NET_IPGRE_BROADCAST is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_NETFILTER is not set
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
> 
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
> 
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> 
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> CONFIG_NETDEVICES=y
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> 
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=y
> # CONFIG_TYPHOON is not set
> 
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> CONFIG_B44=y
> # CONFIG_FORCEDETH is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> 
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_S2IO is not set
> 
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> 
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> 
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
> 
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_ACPI=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
> 
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_PRINTER is not set
> # CONFIG_PPDEV is not set
> # CONFIG_TIPAR is not set
> # CONFIG_QIC02_TAPE is not set
> 
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
> 
> #
> # Watchdog Cards
> #
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
> 
> #
> # Watchdog Device Drivers
> #
> CONFIG_SOFT_WATCHDOG=y
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> # CONFIG_ALIM1535_WDT is not set
> # CONFIG_ALIM7101_WDT is not set
> # CONFIG_SC520_WDT is not set
> # CONFIG_EUROTECH_WDT is not set
> # CONFIG_IB700_WDT is not set
> # CONFIG_WAFER_WDT is not set
> # CONFIG_I8XX_TCO is not set
> # CONFIG_SC1200_WDT is not set
> # CONFIG_SCx200_WDT is not set
> # CONFIG_60XX_WDT is not set
> # CONFIG_CPU5_WDT is not set
> # CONFIG_W83627HF_WDT is not set
> # CONFIG_W83877F_WDT is not set
> # CONFIG_MACHZ_WDT is not set
> 
> #
> # PCI-based Watchdog Cards
> #
> # CONFIG_PCIPCWATCHDOG is not set
> # CONFIG_WDTPCI is not set
> 
> #
> # USB-based Watchdog Cards
> #
> # CONFIG_USBPCWATCHDOG is not set
> # CONFIG_HW_RANDOM is not set
> # CONFIG_NVRAM is not set
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_INTEL_MCH is not set
> CONFIG_AGP_NVIDIA=y
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_EFFICEON is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_GAMMA is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_MWAVE is not set
> CONFIG_RAW_DRIVER=y
> CONFIG_MAX_RAW_DEVS=256
> # CONFIG_HANGCHECK_TIMER is not set
> 
> #
> # I2C support
> #
> CONFIG_I2C=y
> CONFIG_I2C_CHARDEV=y
> 
> #
> # I2C Algorithms
> #
> # CONFIG_I2C_ALGOBIT is not set
> # CONFIG_I2C_ALGOPCF is not set
> 
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> CONFIG_I2C_I801=y
> # CONFIG_I2C_I810 is not set
> # CONFIG_I2C_ISA is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_PARPORT is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_PROSAVAGE is not set
> # CONFIG_I2C_SAVAGE4 is not set
> # CONFIG_SCx200_ACB is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
> # CONFIG_I2C_VOODOO3 is not set
> 
> #
> # Hardware Sensors Chip support
> #
> # CONFIG_I2C_SENSOR is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83627HF is not set
> 
> #
> # Other I2C Chip support
> #
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> 
> #
> # Misc devices
> #
> # CONFIG_IBM_ASM is not set
> 
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> 
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
> 
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> # CONFIG_VIDEO_SELECT is not set
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> 
> #
> # Sound
> #
> CONFIG_SOUND=y
> 
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=y
> CONFIG_SND_RAWMIDI=y
> # CONFIG_SND_SEQUENCER is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_RTCTIMER=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> 
> #
> # Generic devices
> #
> CONFIG_SND_MPU401_UART=y
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> 
> #
> # PCI devices
> #
> CONFIG_SND_AC97_CODEC=y
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> CONFIG_SND_INTEL8X0=y
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VX222 is not set
> 
> #
> # ALSA USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
> 
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
> 
> #
> # USB support
> #
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> 
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_BANDWIDTH=y
> # CONFIG_USB_DYNAMIC_MINORS is not set
> 
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=y
> # CONFIG_USB_EHCI_SPLIT_ISO is not set
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=y
> 
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH_TTY is not set
> # CONFIG_USB_MIDI is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_HP8200e is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> 
> #
> # USB Human Interface Devices (HID)
> #
> # CONFIG_USB_HID is not set
> 
> #
> # USB HID Boot Protocol drivers
> #
> # CONFIG_USB_KBD is not set
> # CONFIG_USB_MOUSE is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_MTOUCH is not set
> # CONFIG_USB_XPAD is not set
> # CONFIG_USB_ATI_REMOTE is not set
> 
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USB_HPUSBSCSI is not set
> 
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
> 
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
> 
> #
> # USB Network adaptors
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> 
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> 
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
> 
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_TIGL is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_TEST is not set
> 
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
> 
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_XFS_FS=y
> # CONFIG_XFS_RT is not set
> # CONFIG_XFS_QUOTA is not set
> # CONFIG_XFS_SECURITY is not set
> # CONFIG_XFS_POSIX_ACL is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> 
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> # CONFIG_UDF_FS is not set
> 
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> # CONFIG_MSDOS_FS is not set
> CONFIG_VFAT_FS=y
> # CONFIG_NTFS_FS is not set
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> # CONFIG_DEVFS_FS is not set
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> 
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> 
> #
> # Network File Systems
> #
> # CONFIG_NFS_FS is not set
> # CONFIG_NFSD is not set
> # CONFIG_EXPORTFS is not set
> CONFIG_SMB_FS=y
> CONFIG_SMB_NLS_DEFAULT=y
> CONFIG_SMB_NLS_REMOTE="iso8859-15"
> CONFIG_CIFS=y
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> # CONFIG_AFS_FS is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> 
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-15"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
> 
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_DEBUG_KERNEL=y
> CONFIG_EARLY_PRINTK=y
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_DEBUG_SLAB is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_PAGEALLOC is not set
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_FRAME_POINTER is not set
> CONFIG_4KSTACKS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
> 
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
> 
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
> 
> #
> # Library routines
> #
> # CONFIG_CRC32 is not set
> # CONFIG_LIBCRC32C is not set
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_X86_STD_RESOURCES=y
> CONFIG_PC=y