From mboxrd@z Thu Jan 1 00:00:00 1970 From: Abdelmajid Bouajila Date: Thu, 27 May 2004 10:40:14 +0200 Subject: [U-Boot-Users] running U-boot on ML300 board?? Message-ID: <009201c443c6$3c664f20$3136a8c0@sassenage.massy.thalesees.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, When running U-boot on ML300 board, I don't receive any character on the serial port. I worked so: *I downloaded a reference design given by xilinx. *With the xparameters.h, I compiled U-boot *I put U-boot in \sw\os\linux\kernel....I rename it on zImage.embedded. *I generate my ace file, and nothing happens when running it on the ML300 board. Have I done a mistake? Thanks Abdelmajid -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20040527/24630036/attachment.htm From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Thu, 27 May 2004 12:33:26 +0200 Subject: [U-Boot-Users] running U-boot on ML300 board?? In-Reply-To: Your message of "Thu, 27 May 2004 10:40:14 +0200." <009201c443c6$3c664f20$3136a8c0@sassenage.massy.thalesees.com> Message-ID: <20040527103331.9E5F0C109F@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <009201c443c6$3c664f20$3136a8c0@sassenage.massy.thalesees.com> you wrote: > > When running U-boot on ML300 board, I don't receive any character on the = > serial port. > > I worked so: > > *I downloaded a reference design given by xilinx. > *With the xparameters.h, I compiled U-boot > *I put U-boot in \sw\os\linux\kernel....I rename it on zImage.embedded. Whay the heck do you think U-Boot needs to be copied to some Linux kernel directory? > *I generate my ace file, and nothing happens when running it on the > ML300 board. Attach a debugger, and check what your processoir is doing. Also make sure your serial port is configured correctly, i. e. without flow control, etc. > Have I done a mistake? Yes, at least one: > ------=_NextPart_000_008F_01C443D6.FEC210D0 > Content-Type: text/html; > charset="iso-8859-1" > Content-Transfer-Encoding: quoted-printable > > Please NEVER post HTML to the list!!!! Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de The number you have dialed is imaginary. Please divide by 0 and try again. From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ryser Date: Thu, 27 May 2004 07:40:36 -0700 Subject: [U-Boot-Users] running U-boot on ML300 board?? In-Reply-To: <009201c443c6$3c664f20$3136a8c0@sassenage.massy.thalesees.com> References: <009201c443c6$3c664f20$3136a8c0@sassenage.massy.thalesees.com> Message-ID: <40B5FDE4.40804@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Abdelmajid, after configuring and compiling u-boot for ML300 you will find an ELF file called u-boot in the root directory of u-boot. Now, configure the FPGA on ML300 with the bitstream from the reference design and then use your debugger (e.g. XMD with P4 cable) to download u-boot to and run it on the board. If you want to generate an ACE file containing u-boot and the bitstream go to the root directory of the reference design and execute the following command: $ xmd genace.tcl -jprog -board ml300 -hw implementation/download.bit -elf /u-boot -ace top.ace Copy the ACE file onto the MicroDrive (e.g. replace the ACE file in xilinx/myace) and run u-boot either by selecting it through the touchscreen or by setting the System ACE CF dial to four. However, I recommend to first get the cable/debugger method working before you try with the ACE file. - Peter Abdelmajid Bouajila wrote: > Hello, > > When running U-boot on ML300 board, I don't receive any character on > the serial port. > > I worked so: > > *I downloaded a reference design given by xilinx. > *With the xparameters.h, I compiled U-boot > *I put U-boot in \sw\os\linux\kernel....I rename it on zImage.embedded. > > *I generate my ace file, and nothing happens when running it on the > ML300 board. > > Have I done a mistake? > Thanks > > Abdelmajid > >