From mboxrd@z Thu Jan 1 00:00:00 1970 From: JoDaY Subject: Re: us-122 firwareloader Date: Mon, 31 May 2004 23:26:21 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <40BBA2FD.1020309@laposte.net> References: <40BB5314.9080404@laposte.net> <20040531171809.GA640@tuba.home> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20040531171809.GA640@tuba.home> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Martin Langer Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Martin Langer wrote: > On Mon, May 31, 2004 at 05:45:24PM +0200, JoDaY wrote: > >>Hi all, >> >>I've 2 install of linux, the first one is the oldest where hotplug >>is able to load firmware when I plug a Tascam us-122. >>But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to >>load the right firmware... The usb led is not lightened :( > > > Sounds like you are using the old tascam-loader instead of usx2yloader. Have > you installed both usx2yloader parts (in alsa-tools and alsa-firmware)? > You're right, the one which is able to load the firmware and make the LED of the card lighting is an old version. I've tried to change it with alsa-tools and alsa-firmware: - snd-usb-usx2y module is loading when I plug the us-122 card - I can see "Bus 002 Device 008: ID 1604:8007 Tascam US-122 Audio/Midi Interface" with lsusb But the usb LED is always off :( I can also see : [USX2Y ]: USB US-X2Y - TASCAM US-X2Y TASCAM US-X2Y (1604:8007 if 0 at 002/008) in /proc/asound/card Is the LED off normal ? Am I near of the goal ? :) Thanks you lot ! Jo ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click