From: Jeff Garzik <jgarzik@pobox.com>
To: Jim B <jim@jbsys.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: SATA Promise driver
Date: Wed, 02 Jun 2004 14:40:22 -0400 [thread overview]
Message-ID: <40BE1F16.2030609@pobox.com> (raw)
In-Reply-To: <007101c448ce$fd2cc8d0$0a01a8c0@jbsys.com>
Jim B wrote:
> Jeff
>
> I have a K8V SE Deluxe MoBo with a Promise FastTrack 378 controller. It can be
> used as a RAID or extended IDE controller by sellecting the proper BIOS setting.
> I have tried the RAID setting and used ft3xx.o driver (from Promise) in FC1 2.4
> kernels to use the two 160 GB IDE disks. I currently have it set to extended
> IDE. I use the pdc-ultra.o driver (from Promise) in FC1 2.4 kernels for this
> mode. I installed FC2 x86_64 version to another partition on the standard IDE
> disk. It boots and works, except it will not see the PATA drives on the Promise
> controller. It says there are no drives present. Does the SATA_Promise module
> support this controller in either of these modes? Am I doing something wrong?
> Is it because I am using IDE drives instead of SATA drivers?
As the name implies, sata_promise driver does not support PATA.
This support is planned, but not present yet.
Jeff
prev parent reply other threads:[~2004-06-02 18:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-02 18:25 SATA Promise driver Jim B
2004-06-02 18:40 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40BE1F16.2030609@pobox.com \
--to=jgarzik@pobox.com \
--cc=jim@jbsys.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.