Re: Run script when USB scanner unplugged

[Ian Pilcher <i.pilcher@comcast.net>]

Harald Hoyer wrote:
> Install the FC2 udev rpm... read the manpage and add a *.rule file to 
> /etc/udev/rules.d . Also add your scanner to /etc/security/console.perms 
> (man 5 console.perms).

OK, I've installed the udev RPM and added the following line to
/etc/udev/rules.d/50-udev.rules:

     BUS="usb", SYSFS{idVendor}="04b8", SYSFS{idProduct}="0110",
         NAME="usb/epson_scanner"

Here is the output of lsusb:

     Bus 002 Device 001: ID 0000:0000
     Bus 001 Device 003: ID 04e8:323a Samsung Electronics Co., Ltd
     Bus 001 Device 002: ID 04b8:0110 Seiko Epson Corp. Perfection 1650
     Bus 001 Device 001: ID 0000:0000

This seems like it should work, but the /udev/usb/epson_scanner node
never gets created.  (/udev/usb/lp0 is created.)  What could I be doing
wrong?

Thanks!

-- 
====================================
Ian Pilcher                                        i.pilcher@comcast.net
====================================


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel