From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damion de Soto Date: Wed, 09 Jun 2004 00:04:41 +0000 Subject: Re: [LARTC] Is it possible to control uplink in a NATted environment Message-Id: <40C65419.4030709@snapgear.com> List-Id: References: <7faa01c44d59$4ae7a660$140110ac@lorco> In-Reply-To: <7faa01c44d59$4ae7a660$140110ac@lorco> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi Logu, > So if I control in the eth1 interface the source IP will > be masqueraded, and it may not result in the desired behaviour. > > Is there a solution to address this issue. You can use iptables to set different marks on the packets, and then filter based on those marks. regards, -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/