From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matteo Brusa Date: Thu, 10 Jun 2004 16:54:21 +0000 Subject: [LARTC] Re: Shaping incoming traffic on the other interface Message-Id: <40C8923D.2070305@tiscali.it> List-Id: References: <87u0xjtma8.fsf@stark.xeocode.com> In-Reply-To: <87u0xjtma8.fsf@stark.xeocode.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Greg Stark wrote: > Hm, I just did exactly the same thing here. I don't see this. > > What do your filters look like? Thanks for your quick answer. My config doesn't look so different: tc qdisc add dev eth0 root handle 1: htb default 20 tc class add dev eth0 parent 1: classid 1:1 htb rate 2000kbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2000kbit prio 1 tc class add dev eth0 parent 1:1 classid 1:20 htb rate 50kbit ceil 2000kbit prio 2 tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 10 fw flowid 1:10 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 20 fw flowid 1:20 The packets are marked in the POSTROUTING chain of the mangle table, as usual. I'm running kernel 2.4.20-30.9 custom and iptables v1.2.7a. HTB is reported as 3.10. Note that the problem raises when i hit the ceil throuput. Thanks, MatB _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/