From: Sylvain Munaut <tnt@246tnt.com>
To: Matt Porter <mporter@KERNEL.CRASHING.ORG>
Cc: Tom Rini <trini@KERNEL.CRASHING.ORG>, linuxppc-dev@lists.linuxppc.org
Subject: [PATCH][RFC] MPC52xx basic support on linux 2.6 (was DMA support for MPC5xxx?)
Date: Thu, 10 Jun 2004 21:50:04 +0200 [thread overview]
Message-ID: <40C8BB6C.4040709@246tNt.com> (raw)
In-Reply-To: <20040603134804.B24468@home.com>
Hi
> Why not? You're the only one showing interest in supporting 5200 in
> 2.6.
Well, I'm getting used to it. I'm also working on ARM IXP1200 on 2.6,
and I'm also the only one AFAIK ;)
> Post the patch and if it's clean it can go in. The "i2c", I assume,
> is an i2c host adapter driver so that needs to be separated so it
> can go to gregkh. Don't lump it in with the include/asm-ppc and
> arch/ppc core support. :)
Here it is, slightly delayed because of hardrive crash and need to
rename all 'Motorola' to 'Freescale' ;)
It's there :
http://www.246tNt.com/linux-2.5-mpc52xx-pending-20040610.diff
bk://bkbits.246tNt.com/linux-2.5-mpc52xx-pending
I haven't inlined or attached it because it's quite large ( ~80k ).
But still, here the summary of the changes, so you at least know what
you're pulling ;)
# This is a BitKeeper generated diff -Nru style patch.
#
# ChangeSet
# 2004/06/10 21:08:41+02:00 tnt@246tnt-laptop.(none)
# Added support for Freescale MPC52xx, both the processor and the
LITE5200 devboard
#
# include/asm-ppc/mpc52xx_psc.h
# 2004/06/10 21:04:05+02:00 tnt@246tnt-laptop.(none) +202 -0
#
# include/asm-ppc/mpc52xx_psc.h
# 2004/06/10 21:04:05+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/include/asm-ppc/mpc52xx_psc.h
#
# include/asm-ppc/mpc52xx.h
# 2004/06/10 21:04:04+02:00 tnt@246tnt-laptop.(none) +427 -0
#
# drivers/serial/mpc52xx_uart.c
# 2004/06/10 21:04:04+02:00 tnt@246tnt-laptop.(none) +872 -0
#
# include/asm-ppc/mpc52xx.h
# 2004/06/10 21:04:04+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/include/asm-ppc/mpc52xx.h
#
# drivers/serial/mpc52xx_uart.c
# 2004/06/10 21:04:04+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/drivers/serial/mpc52xx_uart.c
#
# arch/ppc/syslib/mpc52xx_setup.c
# 2004/06/10 21:04:03+02:00 tnt@246tnt-laptop.(none) +136 -0
#
# arch/ppc/syslib/mpc52xx_setup.c
# 2004/06/10 21:04:03+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/arch/ppc/syslib/mpc52xx_setup.c
#
# arch/ppc/syslib/mpc52xx_pic.c
# 2004/06/10 21:04:02+02:00 tnt@246tnt-laptop.(none) +259 -0
#
# arch/ppc/platforms/lite5200.h
# 2004/06/10 21:04:02+02:00 tnt@246tnt-laptop.(none) +34 -0
#
# arch/ppc/syslib/mpc52xx_pic.c
# 2004/06/10 21:04:02+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/arch/ppc/syslib/mpc52xx_pic.c
#
# arch/ppc/platforms/lite5200.h
# 2004/06/10 21:04:02+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/arch/ppc/platforms/lite5200.h
#
# arch/ppc/platforms/lite5200.c
# 2004/06/10 21:04:01+02:00 tnt@246tnt-laptop.(none) +155 -0
#
# arch/ppc/platforms/lite5200.c
# 2004/06/10 21:04:01+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/arch/ppc/platforms/lite5200.c
#
# arch/ppc/configs/lite5200_defconfig
# 2004/06/10 21:04:00+02:00 tnt@246tnt-laptop.(none) +477 -0
#
# arch/ppc/configs/lite5200_defconfig
# 2004/06/10 21:04:00+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/arch/ppc/configs/lite5200_defconfig
#
# Documentation/powerpc/mpc52xx.txt
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +70 -0
#
# include/linux/serial_core.h
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +3 -0
# Added port type for the Freescale MPC52xx PSC
#
# include/asm-ppc/ppcboot.h
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +7 -0
# Added specific fields for the Freescale MPC52xx
#
# drivers/serial/Makefile
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +1 -0
# Added options for the Freescale MPC52xx PSC
#
# drivers/serial/Kconfig
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +18 -0
# Added options for the Freescale MPC52xx PSC
#
# arch/ppc/syslib/Makefile
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +1 -0
# Added options for the Freescale MPC52xx and the standard LITE5200
devboard
#
# arch/ppc/platforms/Makefile
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +1 -0
# Added options for the Freescale MPC52xx and the standard LITE5200
devboard
#
# arch/ppc/kernel/cputable.c
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +8 -0
# Added entry for the Freescale MPC52xx
#
# arch/ppc/Kconfig
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +20 -8
# Added options for the Freescale MPC52xx and the standard LITE5200
devboard
#
# Documentation/powerpc/mpc52xx.txt
# 2004/06/10 21:03:59+02:00 tnt@246tnt-laptop.(none) +0 -0
# BitKeeper file
/home/tnt/musicbox/kernel/linux-2.5-mpc52xx-pending/Documentation/powerpc/mpc52xx.txt
#
Sylvain Munaut
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2004-06-10 19:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-03 10:50 DMA support for MPC5xxx? Iñigo Lopez Barranco
2004-06-03 14:54 ` David Wolfe
2004-06-03 16:06 ` Matt Porter
2004-06-03 16:42 ` Wolfgang Denk
2004-06-03 18:33 ` Matt Porter
2004-06-03 18:50 ` Tom Rini
2004-06-03 20:19 ` Sylvain Munaut
2004-06-03 20:48 ` Matt Porter
2004-06-10 19:50 ` Sylvain Munaut [this message]
2004-06-18 19:20 ` [PATCH][RFC] MPC52xx basic support on linux 2.6 (was DMA support for MPC5xxx?) Dale Farnsworth
2004-06-18 20:04 ` MPC52xx lite5200 support for booting from dBUG Dale Farnsworth
2004-06-19 10:42 ` Sylvain Munaut
2004-06-19 22:07 ` Dale Farnsworth
2004-06-19 10:55 ` [PATCH][RFC] MPC52xx basic support on linux 2.6 (was DMA support for MPC5xxx?) Sylvain Munaut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40C8BB6C.4040709@246tNt.com \
--to=tnt@246tnt.com \
--cc=linuxppc-dev@lists.linuxppc.org \
--cc=mporter@KERNEL.CRASHING.ORG \
--cc=trini@KERNEL.CRASHING.ORG \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.