From: Pieter Ennes <lkml@spam.ennes.net>
To: linux-kernel@vger.kernel.org
Subject: 2.6.7-rc3-mm1 and advansys driver failes to mount
Date: Sat, 12 Jun 2004 10:26:55 +0200 [thread overview]
Message-ID: <40CABE4F.1040104@spam.ennes.net> (raw)
Hi,
I'm having troubles getting the advansys driver to work in
2.6.7-rc3-mm1. dmesg output seems OK, but when mounting
no filesystem can be found on the partitions.
2.6.7-rc3 is fine. I noticed a few changes in drivers/scsi/advansys.c,
but i'm not much of a hacker to sort it out...
scsi1 : AdvanSys SCSI 3.3GJ: PCI Ultra-Wide: PCIMEM
0xE0BE0000-0xE0BE003F, IRQ 0x13
Vendor: SEAGATE Model: ST39173W Rev: 6244
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 17783240 512-byte hdwr sectors (9105 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host1/bus0/target2/lun0: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 2, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 2, lun 0, type 0
Vendor: IBM Model: IC35L036UWD210-0 Rev: S5CQ
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdc: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sdc: drive cache: write back
/dev/scsi/host1/bus0/target6/lun0: unknown partition table
Attached scsi disk sdc at scsi1, channel 0, id 6, lun 0
Attached scsi generic sg2 at scsi1, channel 0, id 6, lun 0, type 0
Cheers,
--
- Pieter
reply other threads:[~2004-06-12 8:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40CABE4F.1040104@spam.ennes.net \
--to=lkml@spam.ennes.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.