From: Rob Shepherd <robshep@informatics.bangor.ac.uk>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] No communication with USB BT device
Date: Thu, 17 Jun 2004 14:30:00 +0100 [thread overview]
Message-ID: <40D19CD8.20503@informatics.bangor.ac.uk> (raw)
[-- Attachment #1: Type: text/plain, Size: 1913 bytes --]
No HCI connection is possible with my Belkin Bluetooth module. (CSR chip)
__System__
Linux kernel 2.6.7
bluez-libs-2.7
bluez-utils-2.7
bluez-pin-0.23
bluez-hcidump-1.8
__output__
$ dmesg | grep -i usb
sbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-1: new full speed USB device using address 2
Bluetooth: HCI USB driver ver 2.6
usbcore: registered new driver hci_usb
__Order of events__
Boot system
insert dongle [no hotplug system running]
modprobe hci_usb
/etc/init.d/bluetooth start [HIDP complains (ignoring)]
hciconfig shows...[no device params read from device]
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:6 acl:0 sco:0 commands:2 errors:0
hciconfig hci0 up times out.
hcidump show a hci_rlsf command but no response from chip.
This device works fine with Widcomm drivers/stack/application
when same machine is booted into windows XP (shudder)
Where might I be going wrong, What else could I try?
many thanks
Kindest Regards
Rob
--
/**
* Rob Shepherd,
* University Of Wales, Bangor,
* School of Informatics,
* Dean Street,
* Bangor,
* Gwynedd, UK /\ /\
* LL57 1UT / \/ \ /\
* --------------/---/ \--\----
*
* robshep@informatics.bangor.ac.uk
*
* +44 (0) 1248 38 27
*/
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3230 bytes --]
next reply other threads:[~2004-06-17 13:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-17 13:30 Rob Shepherd [this message]
2004-06-17 15:54 ` [Bluez-users] No communication with USB BT device Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40D19CD8.20503@informatics.bangor.ac.uk \
--to=robshep@informatics.bangor.ac.uk \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.