From: Franck Routier <franck.routier-i39dT1/MG/sAvxtiuMwx3w@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Samsung X10
Date: Thu, 24 Jun 2004 17:04:43 +0200 [thread overview]
Message-ID: <40DAED8B.50105@axege.com> (raw)
Hi,
I am trying to install Debian Sid on a Samsung X10 laptop. ACPI is
required to handled power management.
The kernel I use is stock 2.6.6.
When I boot, I get the following messages (from a 'cat /var/log/messages
| grep ACPI') :
Jun 24 15:56:34 etamine kernel: BIOS-e820: 000000001ff70000 -
000000001ff7c000 (ACPI data)
Jun 24 15:56:34 etamine kernel: BIOS-e820: 000000001ff7c000 -
000000001ff80000 (ACPI NVS)
Jun 24 15:56:34 etamine kernel: ACPI: RSDP (v000
SENSX ) @ 0x000f7580
Jun 24 15:56:34 etamine kernel: ACPI: RSDT (v001 SENSX AQUILA
0x06040000 SENS 0x00000000) @ 0x1ff77eda
Jun 24 15:56:34 etamine kernel: ACPI: FADT (v001 SENSX SENSX10
0x06040000 SENS 0x00000050) @ 0x1ff7bf64
Jun 24 15:56:34 etamine kernel: ACPI: BOOT (v001 SENSX $SBFTBL$
0x06040000 SENS 0x00000001) @ 0x1ff7bfd8
Jun 24 15:56:34 etamine kernel: ACPI: SSDT (v001 INTEL EISTRef
0x00002000 INTL 0x02012044) @ 0x1ff77f0a
Jun 24 15:56:34 etamine kernel: ACPI: DSDT (v001 SENSX AQUILA
0x06040000 MSFT 0x0100000e) @ 0x00000000
Jun 24 15:56:34 etamine kernel: ACPI: PM-Timer IO Port: 0x1008
Jun 24 15:56:34 etamine kernel: ACPI: Subsystem revision 20040326
Jun 24 15:56:34 etamine kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Jun 24 15:56:34 etamine kernel: ACPI: Interpreter enabled
Jun 24 15:56:34 etamine kernel: ACPI: Using PIC for interrupt routing
Jun 24 15:56:34 etamine kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5)
*0, disabled.
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs
10) *0, disabled.
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
Jun 24 15:56:34 etamine kernel: ACPI: Embedded Controller [H_EC] (gpe 28)
Jun 24 15:56:34 etamine kernel: ACPI-0347: *** Error: Handler for
[EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:34 etamine kernel: ACPI-1133: *** Error: Method
execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node c14e7e1c),
AE_BAD_PARAMETER
Jun 24 15:56:34 etamine kernel: ACPI: Power Resource [PFAN] (on)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKA] enabled
at IRQ 11
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKD] enabled
at IRQ 10
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKH] enabled
at IRQ 5
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKC] enabled
at IRQ 10
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKB] enabled
at IRQ 11
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKE] enabled
at IRQ 5
Jun 24 15:56:34 etamine kernel: PCI: Using ACPI for IRQ routing
Jun 24 15:56:35 etamine kernel: ACPI-0347: *** Error: Handler for
[EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI-1133: *** Error: Method
execution failed [\_SB_.BAT1._STA] (Node c14eb51c), AE_AML_NO_RETURN_VALUE
Jun 24 15:56:35 etamine kernel: ACPI-0347: *** Error: Handler for
[EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI-1133: *** Error: Method
execution failed [\_SB_.ADP1._PSR] (Node c14eb65c), AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI: Processor [CPU0] (supports C1 C2
C3, 8 throttling states)
Jun 24 15:56:35 etamine kernel: ACPI: Power Button (FF) [PWRF]
Jun 24 15:56:35 etamine kernel: ACPI: Lid Switch [LID0]
Jun 24 15:56:35 etamine kernel: ACPI: Sleep Button (CM) [SLPB]
Jun 24 15:56:35 etamine kernel: ACPI: Fan [FAN0] (on)
Jun 24 15:56:35 etamine kernel: ACPI-0347: *** Error: Handler for
[EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI-1133: *** Error: Method
execution failed [\_TZ_.THRM._TMP] (Node c14eb8dc), AE_BAD_PARAMETER
The system boots up, but for example the battery is not recognized...
Any hint ?
Thanks,
Franck
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
reply other threads:[~2004-06-24 15:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40DAED8B.50105@axege.com \
--to=franck.routier-i39dt1/mg/savxtiumwx3w@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.